2013 Newest Vascular Doppler

Bf-510 pocket fetal doppler For this model there is no lcd display to show fhr. It comes up with a headphone to hear fhr very clearly. It can work with dry battery or rechargeable battery. Please find the following specifications: Ultrasonic frequency: 2.0mhz Power: 9.0v dry battery or 9.0v recharge battery Ultrasonic intensity: _10mw/cm2 Work time: 4 hours

Supplier: Fetal doppler, vascular doppler, fetal monitor, ecg, syringe destroyer

Operation guide: Destroy disposable syringe to reject cross infection completely while melting the needle, Insert the needle into the melting hole, and then press down the syringe gently when the Needle touches the electrodes inside. While the needle is being melted, there will be spark and the needle indicator will be Flashing for about three seconds, which is a normal phenomena; It has the overheat protection function to protect machine work normally while melting the needle;ozone disinfection function and alarm function when the drawer is full of residue; The residual liquid in the needle will be vaporized instantly during melting, the ¡°working indicator¡± Is flashed when melting the needle, which means the needle is being melted and the whole process Lasts 1-3 seconds; While cutting the head of the syringe body, insert the syringe into the hole and pull the handle To cut it off. The whole process lasts 3 seconds. Destroy needle specifications 18g---34g Dealing with the waste residue: There is a taphole at the bottom, under which there is a rubbish drawer to collect waste residue. Please clean the rubbish drawer after using some time (usually after melting 50pcs of syringes). Press the drawer gently at the bottom, which will flick automatically, then clean out the waste Residueand install again.

Pocket fetal doppler mainly applies to detect the fetal heartbeat rate from the twelfth week Lcd can display fhr, synchronous fhr signal, battery indicator, volume of sound and alarm indicator accurately Built-in rechargeable battery can work continuously more than 5 hours Blue backlight lcd display for use conveniently at night Automatic power off ( one minute), self-detect function, and alarm function when fhr is out of the normal range or battery power is in shortage Only 270g, can be carried conveniently with a gallus Built-in speaker and collocated with earphone jack 2.0mhz probe. Specifications: Executive standard: en61266:1995 Ultrasonic frequency: 2.0mhz¡à10% Ultrasonic intensity: ¡ü10mw/cm2 Comprehensive sensitivity: ¡ý90db Fhr range: 60--210bpm(¡à2bpm) Fhr alarm range: ¡ü100bpm or ¡ý160bpm Isptp: ¡ü0.1mpa Battery: 9v dry battery (optional for 8.4vni-mh rechargeable batteries and charger) Maximum audio output intensity: ¡ü1w Doppler frequency: 100--3000hz Static continuous working time: ¡ý2h Automatic dormancy time limit:1 minute Working temperature: 10-40¡æ Humidity: ¡ü80% Atmospheric pressure: 86--106kpa Packaging collocation: Single unit dimension: 24cm x 23cm x 12cm gross weight: 1.5kg 20 pcs/carton dimension: 44cm x 36cm x 42cm gross weight: 18kg Normative collocation: gallus, operation manual, approval certification, warranty card

Medical fluid infusion warmer BFW-1000 is a kind of warming device to warm the liquid to be infusioned into human body by warming the infusion pipe, with high efficiency and easy use. Dry groove warmer structure: Adopt conventional infusion pipe to warm the infusion pipe directly, no need special consumables. Features: The BFW series is an instrument can heat the infusion/blood by electrical energy, dry warmer. It has use the temperature sensor can automatic regulation of fluid temperature. Infrared detection function can work continuously for 3 to 6 hours; Prompt function: the audible and visual alarm to remind doctor; Design Water-proof. The thermostat inside help the infusion stability, without overheating. BFW-1000£ºHighlight LED display; Can start to warm within 1 minute after switching on. Temperature range: 28¡æ - 41¡æ ( ¡À1¡æ ) Humidity: 35 ¨C 95 %RH ( Non condensing) Flow Rate: 1-15ml/min Medical fluid infusion warmer BFW-1000 is a kind of warming device to warm the liquid to be infusioned into human body by warming the infusion pipe, with high efficiency and easy use. Dry groove warmer structure: Adopt conventional infusion pipe to warm the infusion pipe directly, no need special consumables. Features: The BFW series is an instrument can heat the infusion/blood by electrical energy, dry warmer. It has use the temperature sensor can automatic regulation of fluid temperature. Infrared detection function can work continuously for 3 to 6 hours; Prompt function: the audible and visual alarm to remind doctor; Design Water-proof. The thermostat inside help the infusion stability, without overheating. BFW-1000£ºHighlight LED display; Can start to warm within 1 minute after switching on. Temperature range: 28¡æ - 41¡æ ( ¡À1¡æ ) Humidity: 35 ¨C 95 %RH ( Non condensing) Flow Rate: 1-15ml/min

Supplier: Fetal doppler, vascular doppler, syringe destroyer, ecg, ultrasound scanner, patient monitor

Supplier: Fetal doppler, vascular doppler, ECG, syringe destroyer, patient monitor, fetal monitor, pulse oxymeter, ultrasonic scanner, fluid warmer

Needle destroyer features: Electrodes made from peculiar heat-resisting material can work for long time, too low working voltage7vinsures the operators safety. After melting the needle, then meld the syringe tube, all work finish in one time, easy and safe. The controlling curcuit desgned for safety insures the operators safety. Very simple operation Empty the liquid in the syringe during use, then insert the needly into hole to melt the needly first, and then move toward the left cutting hilt. (refer to s 7, 8). It needs totally 6 seconds to destroy the syringe and needle. Convenient to carry, work with ac. Portable desisn can be directly moved, model bd-310 can directly use ac220, convenient to supply electricity.

Supplier: Fetal doppler, vascular doppler