Laser level instruments, surveying or construction tripods and camera tripods.
Stdfsm 3666 digital fiber spectrometer Detector: toshiba tcd1304 ap linear ccd array Detector wavelength response range: 200nm-1100nm (200nm-850nm or 350nm-1100nm) Pixels: 3648 Pixel size: 8um*200um Pixel well depth: 105 number electrons Snr: 300:1 (full signal) A/d resolution: 12 bit Dark noise: 50 rms counts Corrected linearity: 99.8% Sensitivity (photon/count): 400nm:130, 600nm:60 Optical system: f/4, asymmetrical crossed czerny-turner Focal length: 45mm (input), 70mm (output) Entrance aperture: 5um, 10um, 15um, 20um, 50um width slits or fiber (customizable) Grating: various kinds of scoring grating or holographic grating with different grating constants and flare wavelengths (customizable) Cylindrical lens: optional Optical filter: band pass or long pass filters to eliminate secondary spectrum Fiber and fiber connection: na 0.22, sma 905 (customizable) Wavelength range: depend on optical grating Optical resolution: 0.2nm-10nm fwhm (depend on grating constant, width of slit and detector model) Wavelength tolerance: about 0.2mm Integration time: 10us-64s Dynamic range: 2.0*108 (system), 1300:1 (single acquisition) Stray light: < 0.05% at 550nm Power consumption: 250ma*5 vdc Data transfer speed: full spectrum into memory every 5ms at usb 2.0 (16ms at usb 1.1) Standard
Penta Angle Prism are widely used in laser level, Image system, precision system, and optical area. For penta prism, the deviation angle of 90 is independent of the orientation of the prism, thus it is particularly important and wide in application which the prism orientation cannot be precisely controlled, we can produce high precision penta angle prism,and make coating according to customer's request.
Sunday Optics provides many kinds of roof prisms including Schmidt Roof Prism Lehmann Roof Prism Abbe Roof Prism Penta Roof Prism and Combined Roof Prism, etc. Lehamann Prism Material: Optical glass, H-K9L, Quartz Size:5-300mm Angle Tolerance:3' Size Tolerance:+/-0.05mm Coating: AR BBAR Metal
Corner Cube Retroreflectors Corner Cube Prism is also called Retroreflector or Trihedral Prism. In the Corner Cube Prism, three reflecting surfaces are perpendicular to each other, like the side wall of the cube. The input surface is perpendicular to the cube diagonal. Disregarding the angle of incidence, the output beam is parallel to the input one, but it is of opposite direction. Inset of the several corner prisms, for better matching, their entrance-exit surface is often hexagonal. In case of this prism the phenomenon of full internal reflection occurs so it is not necessary, (however it is possible) to put mirror coating on the reflecting faces. Normally the reflection surfaces are Al reflection coating, and then covered with Cu and Black Painting. Specifications: Material: BK7 Glass Dimension Tolerance (mm): 0.2 (General), 0.1 (High Precision) Deviation: 180 3 arc secs Flatness (per 25mm 633nm): 2(General), 10 (High Precision) Clear Aperture: 80% (small size),90%(large size) Surface Quality: 60/40 (General), 10/5 (High Precision) Bevel (mm): 0.1-0.5 Coating on input and output sides: Note for corner cube retroreflector: (1). Besides N-BK7, custom-made corner cube Prisms made of other optical materials are available. (2). Corner Cube Prisms with lower deviation tolerance, such as 1, 30, or 10, are available. (3). Corner Cube Prisms with better surface Quality (better than 40/20 or 20/10) are available. (4). HR or Metal reflection coating(Al, Ag, Cu, etc.) on reflection surfaces is available. (5). AR coating on input/output surface is available upon request. (6).Custom-made non-standard Corner Cube Prisms at any other size are available upon request.
Porro Prism A refracting optical prism used in optical instruments to modify image orientation, In use, the light enters through the largest rectangular plane in the prism, passes through two total reflections of the inclined plane, and then penetrates the original plane of incidence, Because the light comes in and out normally, the prism does not disperse. But the image that passes through Porro prism will be flipped 180 degrees, and it will travel in the direction it entered, which means it will travel 180 degrees. Porro Prism Material BK7, UV Fused Silica, Sapphire, ZnSe,Caf2,Si,Ge,etc. Size 3mm-300mm Size tolerance 0.00/-0.05mm or customer request Clear Aperture 90% S/D 60-40 40-20 20/10 10/5 Flatness 1/10 1/4lambda at 632.80nm Chamfer 0.25mmx45 Angle tolerance
Optical components.
Dyes, pigments, optical brighteners, chemicals, machines.
Visual sorting machine, optical sorting machine.Manufacture
Light booth, color assessment cabinet, coloimeters, spectrophotometer, gloss meters, needle detector.
Q-switch, crystals, laser optics, lasers, hair removal, tattoo removal, IPL, mirrors, lenses, PBS, wave plates, windows, filters, coating.
Lasers, optics & laser parts.
Semiconductor laser, optical prism, laser module, optoelectronics.
Medical, optical, dental supplies.
Laser optics, precision optical component.Custom optical component or OEM services
Vision system, inspection machine.
Ophthalmic instruments, surgical instruments.
Ophthalmic products and optic products.
Contact lens, contact lens case, contact lens solution, contact lens care product.
Used eye surgical equipment.
