Parameter
Single mode
Multimode
Insertion loss(db)
1 0.25
Exchangeability(db)
1 0.20
Repeatability/500 remates(db)
1 0.30
Sleeve material
Zirconia
Phosphor bronze
Housing material
Plastic
Metalic
Operating temperature
-40¡ãc to +80¡ãc
Storage temperature
-40¡ãc to +80¡ãc
The fibers, 250¦ìm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of psp longitudinally. Between the psp and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (pe) sheath.
Charicteristic: good mechanical and temperature performance
high strength loose tube that is hydrolysis resistant
special tube filling compound ensure a critical protection of fiber
crush resistance and flexibility
psp enhancing moisture-proof
two parallel steel wires ensure tensile strength
Production Technology & Attributes (**Recommend**)
i. High-density Triple-layer Copper Shielding maximizes rejection of EM and RF interference for enhanced signal integrity.
ii. 99.7% Oxygen Free Copper Vapor-Infused catalyst for improved Signal Transfer.
iii. Vapor-Infused dielectric provides higher velocity of propagation for maximum signal strength
iv. Premium metal housing & 24K Gold plated connector HDMI 19 pins/ HDMI 19 pins design specs.
v. Heavy Duty PVC Jacket with integrated strain relief & Nylon Mash protects against wire damage for consistently high-quality audio video.
vi. HDMI ATC 1.3B & 1.4 ,CE, UL,Rohs compliant
vii. For the use of all HDMI devices including Blu-Ray player, Digital Receivers, HDMI enabled gaming consoles, Computers, TV, Mobile, Laptop,Camera, etc.
Features
i. Best Video Quality -1080p to 1600p Our Certified HDMI 1.3b cable supports maximum pixel clock rate of 340 MHz 10.2 Gbit/s which allows for WQXGA (2560X1600), or up to 1600p.
ii. This future proofs your cable beyond today 1080p.
iii. Backward support for 1080i, 720p, 720i, 480p & 480i
iv. Supports 12-bit color, also known as Deep Color
v. Highest Sound Quality - Latest lossless surround sound technology Enables highest sound quality:
vi. Ultra-lifelike 192/24 Dolby TrueHD and DTS-HD lossless surround sound, available on Blu-ray Disc and HD DVD movies.
vii. Life Time Warranty At anytime during your use of our cable if you are for any reason unhappy with it, contact us and we will provide you with free replacement.
Key Difference with our cable
i. In the world of P&A HDMI Cables, production technology and raw materials used determines the overall quality of your cable.
ii. In terms of technology, our cables are manufactured under the strict P&A guideline & production technology as one of the most well known Home Video and Audio peripherals companies in the world.
iii. In terms of raw materials used, we do no cut corners and only give you the best. That is why our HDMI Cable gives you the best dollar for dollar value.
Alxenses’s offers a series of fiber-optics products based on Fiber Bragg Grating (FBG) technology. FBG is produced in optical silica fibers by creating periodic refractive index variations in the fiber core using UV laser light. FBG is an in-line optical filter and its reflection wavelength and spectral shape depends on the periodicity, length as well as depth of the refractive index changes of the grating structure. FBG exhibits very low loss and is low-cost compared to the bulk-optics counter parts. By altering the grating periodicity and refractive index change, FBGs for various fiber-optics communication and sensing applications can be easily produced.
Features:
•High reliability and stability
•High reflectivity
•High side-lobe suppression ratio
•Low insertion loss
•Narrow bandwidth optical filter
•Immunity to EMI
•Multiplexing capability
Both Acrylate and Polyimide coated FBGs are available.
Note:
Acrylate and polyimide are the two common coating materials for optical fiber. The polyimide coating withstands higher operating temperature (up to 300°C) than Acrylate material (up to 85°C).
Features:
•High reliability and stability
•High reflectivity
•High side-lobe suppression ratio
•Low insertion loss
•Narrow bandwidth optical filter
•Immunity to EMI
•Multiplexing capability
Alxenses’s Chirped fiber Bragg grating is an in-fiber broadband reflective optical filter. Using advanced fabrication technique and production facilities, grating period and refractive index modulation depth along the length of FBG can be precisely controlled to produce chirped fiber Bragg grating with different spectral and dispersion characteristic. The broad bandwidth and customizable spectral shape of chirped fiber Bragg grating is particularly effective in gain and spectral flattening of EDFA or ASE optical source.
Features:
•Low insertion loss
•Customize reflection spectrum
•Wide bandwidth
Applications:
•ASE filtering
•EDFA gain flattening
•Broadband reflector for fiber laser
•Dispersion compensation
Alxenses’s fiber bragg grating (fbg) array is produced using advanced fabrication technique to write many fbgs in a single strand of optical fiber without any splicing points. The mechanical strength of alxenses’s fbg arrays is therefore significantly better than fbg arrays produced by slicing many fbg arrays produced by slicing many fbgs together. The high quality fbg array with customized wavelength and spacing allow distributed measurement over long distance. Fbg arrays are particular suitable for large-scale sensing in strain, temperature or pressure monitoring in oil, gas, civil engineering, aviation and marine industries.
Features:
•low insertion loss
•spliceless fbg array
•customized fbg array configuration
•accurate fbg wavelength and reflectivity
Applications:
•large-scale strain and temperature monitoring in oil, gas, civil engineering, aviation and marine industries.
Alxenses’s short-length FBG is fabricated based on advanced FBG fabrication technique and production facilities. The Bragg wavelength and length of the FBG can be controlled precisely while maintaining high reflectivity and side-lobe suppression ratio.
The standard length of short-length FBG is 3mm and can be customized to various lengths upon request. The short-length FBG allows smaller form-factor housing to be used for FBG packaging that is necessary when sensor size is a concern. Short-length FBG is suitable for building small sensors for temperature and strain measurements and compact sensor arrays for distributed monitoring applications.
Features:
•Short length
•Low insertion loss
•Multiplexing of FBG sensors in single fiber
Applications:
•Small form-factor sensor packaging
Note:
In general, the bandwidth becomes wider when the length of FBG gets shorter.
Alxenses¡¦s FBG Interrogators are accurate measuring instrument with multi-channel of multi-sensor. These FBG Interrogators provides complete and reliable resolution to FBG Sensor Measurement System.
Features
Core to core alignment by pas technology ( pas:profile alignment system)
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single x or y view and x & y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch tft color lcd monitor with clear digital image display
Usb & vga interface
Software upgrade via usb interface
Specifications
Model Kl-300t
Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655)
Fiber cleaved length8~16mm(coating diameter: 250µm)
16mm(coating diameter: 250 ~ 1000µm)
Fiber diameterCladding diameter:80 ~150µm coating diameter:100~ 1000¦ìm
Fiber countSingle
Fiber aligning methodCore or clad aligning
Image processing methodDigital
Actual average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds)
Splicing timeTypical 9 sec, with standard sm fiber
Splicing mode53(templet), 40(user)
Splice loss estimateMore accurate
Return loss>60db
Storage of splice result4000 results, 20 parameter per result
Fiber display and magnification300x(x or y view), 150x(x and y view)
Tube heating timeTypical 30 sec
Tube heating mode9(templet), 24(user)
Tube heating temperatureCan be adjusted
Applicable protection sleeve length60mm, 40mm and a series of micro sleeves
Tension test2n
Electrode life2500
No.Of splice/heating with batteryTypical 150 cycles (splice/tube heat) with inner li-battery
Display screen5.6 tft inch color lcd monitor
Image change overThe fiber image is turned upside down
TerminalsUsb 1.1 and vga
Operating condition0 ~ 5000m above sea level, 0 ~ 95%rh and -10¡«50¡æ, respectively, max. Wind velocity of 15m/s
Power supplyAc 100-240v with ac adapter inner li-battery(6600mah)
Dimensions150mm(l) x150mm (w) x150mm (h)
Weight2.7 kg excluding battery, 3.2 kg including battery.
Features
Rugged construction providing shock, dust and moisture resistance
Dual monitor position with automatic image orientation
Automatic arc calibration and iber identiication
User-selectable iber clamping method sheath clamp or fiber holders
Auto-start tube heater feature
Color LCD display with anti-relective coating for excellent visibility in bright sunlight
Simultaneous battery charge and splicer operation
Long life battery (up to 160 splice/heat cycles per charge)
Detachable work table incorporated into the transit case
Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet
Green friendly RoHS & WEEE compliant
Specifications
Model FSM-60S
Applicable Fibers SM(G.652),MM(G.651), DS(G.653),NZ-DS(G.655)
Cladding Diameter 80 um to150 um
Coating Diameter 100 um to 1000 um
Fiber Cleave Length 8 to 16mm with 250um coating diameter, 16mm with 900um coating diameter
Typical Average Splice Loss 0.02dB with Sm, 0.01dB with mm, 0.04dB with DS, 0.04dB with NZDS
Splicing Time Typical 9 seconds with standard single-mode fiber
Arc Calibration method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing modes 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera core alignment data
Storage of Splice Result Last 2000 results to be stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification 300X for single X or Y view, or 187X for X and Y view
Viewing method Dual cameras with 4.1 inch TFT color LCD monitor
Operating Condition 0 to 5,000 m above sea level, 0 to 95 % RH and -10 to 50°C respectively
mechanical Proof Test 1.96 to 2.25N
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3(40), 35-55 seconds with Fujikura micro sleeves
Protection Sleeve Length 60mm, 40mm, micro
Splice Cycles with Battery Typical 160 cycles with power save functions activated
Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-08 battery
Terminals USB 1.1 (USB-B type) for PC communication.
Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protection Max. wind velocity of 15m/s. (34 mph)
Dimensions (W × D × H ) 136 × 161 × 143 mm; 5.3 × 6.3 × 5.6 inches
Weight 2.3 kg (5.1 lbs) with AC adapter; 2.7 kg (5.9 lbs) with BTR-08 battery.
Features
Fiber core can be display clearly
Single x or y view and x & y view simultaneously
Auto check quality of , cleaved end face
Auto select best splicing program
9 seconds splice time and 30 seconds heat time
Small bulk and light weigh
5 inch color lcd monitor with clear digital image display
Simple operation menu
Specifications
ModelKl-280
Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655)
Fiber cleaved length8~16mm(coating diameter: 250µ,m)
16mm(coating diameter: 250 ~ 1000µ,m)
Fiber diameterCladding diameter: 80 ~150µ,m coating diameter: 100~ 1000¦ìm
Fiber countSingle
Fiber aligning method Core , aligning
Return loss>60db
Actual average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds)
Splicing modeAuto
Splicing mode12(templet), 188(user)
Typical splicing timeTypical 9 sec, with standard sm fiber
Protection sleeve length60mm, 40mm and a series of micro sleeves
Storage of splice result5000 results, 3 parameter per result
Tension test2n
Fiber display and magnification400x(x or y view), 200x(x and y view)
Tube heating timeTypical 30 sec
Electrode life2500
No.Of splice/heating with batteryTypical 130 cycles (splice/tube heat) with inner li-battery
Display screen5 inch color lcd monitor
Image change overThe fiber image is turned upside down
TerminalsRs 232
Operating condition0 ~ 5000m above sea level, 0 ~ 95%rh and -10 50c, respectively, max. Wind velocity of 15m/s
Power supplyAc 100-240v with ac adapter,inner li-battery(6600mah)
Dimensions150mm(l) x150mm (w) x160mm (h)
Weight3.52 kg including battery.
Features
Color LCD monitor & 256 magnification
Compact & light weight
Reversible monitor with control panel on each side
Max. Wind velocity of 15m/s.
8 sec. Splice time, 40 sec. Tube-heat time
Simultaneous x and y views
Large capacity internal battery
System test ensures the best working condition
User programmable
Auto check fiber end face
Auto calibrate parameters
Store 8000 groups of splice results
Multiple language options
Specifications
ModelDvp-730
Applicable fibersSm, mm, ds, nz-ds, edf
Cladding diameter100 to 150um
Coating diameter100 to 1000um
Fiber cleaved length8-22mm (standard)
Splicing modeAuto & manual
Average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds)
Return loss 60db
Environment conditions-25-+50(operation temperature), 0-95%rh(humidity), 0-5000m (altitude)
Storage environment-40-+80(temperature), 0-95rh (humidity)
Protection sleeve length20mm, 40mm, 60mm
Tension test2.0n (standard)
LanguageEnglish, chinese, korea, russian, spanish etc.
InterfaceRs232 interface & video output
Power supplyAc adaptor: 85-260v input voltage
Internal battery: 12v voltage, 10ah, up to 200 times of continuous splices and heatsdc adaptor: 12v voltage, optional multipurpose external battery
Dimensions170(w)140(h)170(d)mm
Weight3.3kg.
