Series ZYD Double-Stage Vacuum Transformer Oil Purification Systems is used for transformer oil dehydration and transformer oil degasification as well as other electrical insulating liquids such as silicone fluids. The ZYD Process is able to increase and maintain the oil's dielectric strength and includes the removal of free and soluble water, free and dissolved air and gases and other particulate matter. The standard ZYD system is designed for processing oils in workshops, in storage tanks or directly in transformers (energized or de-energized transformers). Series ZYD oil purifier can be used as an independent vacuum source with functions of vacuum drying and vacuum oiling. Feature 1. ZYD can evacuate the vacuum for the electric equipments separately, such as the transformer. Also it can be used to dry the electric equipment and input the oil into the electric equipment under the vacuum state. 2. This machine have two vacuum pumps (one is the vacuum pump, other one is the roots pump), which can improve the working value highly. Making sure the water-content of the treated oil is less than 3 ppm. 3. The machine adopts the double-infrared liquid automatic controller, pressure automatic-protector which can make sure the machine works online for 150 hours continuously without person. So it is a reliable and high automatically machine. 4. Besides the common vacuum oil purifiers function of dewatering, degassing, and removing the impurity, this machine can regenerate the seriously bad oil by separating the electric-polarity materials, such as deeply oxides and free carbon from the oil effectively. The treated oil can reach the specifications of the new oil, such as the oil dielectric strength, flash point, acid value and oxidation resisting etc. 5 Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technologies 6. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 7. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically. 8. Functions of live line work onsite, vacuum drying and vacuum oiling. Advantages: Comparing with single stage transformer oil purifier, Series ZYD oil purifier can increase the effectiveness more than three times, more quickly and completely dewater, degas, remove particles to get higher dielectric strength. This equipment can be used as independent vacuum source with the functions of vacuum drying and vacuum oiling for the electric plants.
Engine oil regeneration system is mainly for regenerating the waste engine oil.
Drill collar Standard:api spec 7 drill collar Material:aisi 4145h alloy steel or non-magnetic material Specification: Od:3 1/8"-11" Length:10'-31' Type: slick drill collars and spiral drill collars
Well completion tools Packer: esp packer, rtts packer, production packer, permanent packer, mechanical set packer Flow control tools: sliding sleeve, injection equipment, shear set Subsurface safety valve Top and bottom nipple Wireline tool: blanking plug, running tool, shifting tool, locking mandrel, blocking plug Bridge plug Gas lift tools: injection pressure operated valve, production pressure operated valve, reverse flow check valve, dummy valve
Aisi 4330v mod forgings in different shape for various industries such as the drill rod for the mining industry, stabilizer & drilling jar for the oil industry
Series JZC waste engine Oil regeneration equipment is specially designed for regenerating the black engine oil and diesel oil. It can effectively remove the wear debris, asphalt, wax quality, impurities, moisture, acid quality, organic acids and inorganic acids from waste engine oil; also, carbon particles, deep oxides and other fine impurities which disperse in oil are all removed out. JZC series can demulsify and improve oil color, making the regenerated oil color closed to new oil color, recover the oil performances. After the regenerating process, the treated oil will be the engine oil and diesel oil, which is suitable for making new diesel oil or lubricating oils. wooden case
Series jyls vertical-closed plate filtration device was developed improved from the old-type horizontal-closed filtration device. This machine plate-filter-leaf materials is stainless steel, it is reliable and long life-time. Plate-filter-leaf is double-face filtering, machine filtering size is from 5 square meters to 100 square meters. Jyls vertical-closed plate filtration device uses automatic vibration-dump-sludge principle, it can automatic and continuous dump the sludge from the filtration tank, it saves much labor cost. Jyls can be made of stainless or carbon steel, the user can choose any materials according to the application. Jyls filtration machine don¡¯t use filter cloth and filter paper, machine works in closed filtering tank, it is envirnoment friendly, no pollution. This machine is widely used in the petrochemical, chemical, oil, grease, pharmaceutical, beverage and other industries of the solid-liquid separation or clarification filtration. Wooden c ase
Application: Series tya vacuum lube oil purifier is mainly used for purifying unqualified lubricating oil, hydraulic oil, compressor oil, refrigeration oil and other industrial oils. This oil recycling machine can rapidly separate water, gas, particles and volatile matter (such as alcohol, gasoline, ammonia, etc.) from waste oil, restoring oil viscosity, flash point and performance. The treated oil can reuse again in various industrial equipments. It is widely applied in petroleum, chemical, mining, metallurgy, electric power, transportation, machinery manufacturing, railway etc. Wooden case
We deals in all kind of quality oil expeller for oil seeds and oil cake . 1o'x5'x8.5'
The stabilizers are the part of the drill string including different types such as near bit stabilizer and string stabilizer, integral blade stabilizer, interchangeable stabilizer, roller reamer, also we supply the semi-finished forging Material
We manufacture the drill stem testing tools for the oil well testing service, the testing string include rtts packer, rtts circulating valve, rtts safety joint, select tester valve, omni valve, bj jar, slip joint, retrievable bridge plug, production packer etc. Also we supply the surface testing equipment to match our dst tools, such as flowhead(surface test tree), manifold, plug valve, all the related flange and pipeline etc. The material is as per the standard mr 0175 More information about the tools, contact us freely
Technical features: Compatible with warrior surface system. Able to combine with electro-magnetic defectoscope tool, well temperature tool and ccl & gr to work simultaneously. 3d image enables easy visual evaluation of damage status of casing. 3¨csectioned tool structure design enables simple assembly and disassembly which ensures effective trouble shooting. Easy maintenance for both major components and consumable parts. Carbide alloy measuring tips of fingers are anti-abrasive with long service life. The fingers can be easily replaced by one engineer within few minutes. With design of strong finger elasticity and sand prevention, successful performance can also be achieved in heavy mud wells with high accuracy. Specification : Max diameter of tested string: 12 3/4 in. (324 mm ) Min diameter of tested string: 1 15/16 in. (50 mm) Max thickness of single casing: 5/8 in. (16 mm) Max thickness of double casing in total: 1 in. (25 mm) Accuracy of thickness Single casing: 0.02in. (0.5 mm ) Double casing: 0.06in. (1.5 mm ) Min length of axial crack: 2.5" single string 1 15/16 in. (50 mm) 5" single string 2 3/4 in. (70 mm) Working temperature:-20- 175(-40-350) Working pressure:100mpa (15, 000 psi) Working voltage:90v2
Application: Measure the thickness of tubing and casing Detect corrosion and damage of pipe string Detect the horizontal and vertical crack, fracture and deformation of pipe string Specification : Max diameter of tested string: 12 3/4 in. (324 mm ) Min diameter of tested string: 1 15/16 in. (50 mm) Max thickness of single casing: 5/8 in. (16 mm) Max thickness of double casing in total: 1 in. (25 mm) Accuracy of thickness Single casing: 0.02in. (0.5 mm ) Double casing: 0.06in. (1.5 mm ) Min length of axial crack: 2.5" single string 1 15/16 in. (50 mm) 5" single string 2 3/4 in. (70 mm)
Features: The optimum pad contact with borehole, maintained by an advanced hydraulic actuating device, makes it possible to acquire high quality image data in rough borehole conditions. henew button and connector structure, the advanced sealing technique and up-to-the date electronics ensure the high reliability of the tool. he complete calibration facilities and systematic calibration procedures ensure the data precision and consistency. The mature data acquisition and field processing software satisfy the clients with quick and flexible image presentation. The tool can work in fast scanning mode, slow scanning mode or dipmeter mode. Specification : Temperature: 350¨H(175) Pressure : 20,000 Psi (140 MPa) / 15,000 Psi (100 MPa) Telemetry : 430 Kbps/100 Kbps Inclination : measurement range Inclination: 0 Azimuth:02 (when inclination>1 ) Resistivity measuring range:0. ,000 .m Vertical resolution :0.2 in. (5 mm) Caliper measuring range:5 in. (127 mm) ~ 20.8 in. (530 mm) Logging speed :1,476 ft/h (450 m/h), in Fast mode 740 ft/h (225 m/h), in Slow mode Applications: This tool is used to acquire and present variety of 2D or 3D borehole resistivity images, which are widely used in geological analysis, petrophysical analysis and borehole property analysis. The image data processing technique, image data base and intelligent image correlation technique greatly widen the application scope of MCI imaging logging data. The logging data are mainly used for: Sedimentary feature and rock texture recognition Lithology identification, profile correlation and electro-facies analysis Fracture, vug and fault identification Dip analysis and structural feature analysis in the vicinity of the borehole Borehole geometry and in-situ earth stress analysis Formation evaluation in carbonate reservoir and some igneous rock reservoir
Multi-pole array acoustic tool can be used to make the following measurements: mono-pole array acoustic measurement, cross dipole (xx dipole and yy dipole) array acoustic measurement, quadra-pole array acoustic measurement. Features The robust mechanical design of this tool allows for successful jobs in deviated/horizontal wells. Applications Lithology identification Formation porosity evaluation Fracture identification Formation anisotropy analyses In situ earth stress analyses Formation fluid differentiation Permeability estimation Borehole stability analyses Rock strength analyses Induced-fracture evaluation after stimulation Synthetic seismogram Avo calibration
Applications: Determination of geothermal gradients Correction of other logs Measuring tool head tension Specification : Measuring range Mud resistivity: Mud temperature: Tension :-2, 200 lbs~+6, 000 lbs ¨-1, 000 kg~+2, 700 kg Measuring accuracy Mud resistivity: 10% of the measured value Mud temperature (1 + 1% of the measured value) Tension : (68kg + 3% of the measured value) Resolution Mud resistivity: 1% Mud temperature:32.18 ¨h (0.1 ) Tension:10 lbs (4.54 kg) Max. Logging speed:32 ft/min (10 m/min) Tool od:3.6 in. (92 mm) Make up length:66.6 in. (1, 692 mm) Shipping length:84.1in. (2, 135 mm) Tool weight:92.6 lbs (42 kg)
Features: The latest Complex Programmable Logic Devices and Digital Signal Processing are used to ensure the fastest amd most reliable operation. The system design optimies the human / machine interface for simplicity of operation and ease of use. Applications: Logging control Power supply for logging sondes Data processing Data recording Plotting Tool calibration Data acquisition Display Data playback and editing Measuring Range : Operating Temperature:0 Centigrade to 50 Centigrade (32 Fahrenheit to 122 Fahrenheit) Storage temperature: -20 Centigrade to 75 Centigrade(0 Fahrenheit to 167 Fahrenheit) Relative humidity:
Features: Multi-array induction tool coil system adopts asymmetry structure with one transmitter coil and eight receiver coils. It works at three frequencies. Multi-dsp and array coil system are adopted in the tool. The multi-channel, multi-frequency weak signal pick-up in the tool is achieved by real-time calibration, digital filtering and digital phase-sensitive detection technology. A lot of mechanical and electronic measures have been taken for reaching the desirerable tool stability and high reliability. Due to the excellent performance, high reliability and high accuracy of multi-array induction tool, many oil companies decide to adopt multi-array induction tool as one important part of their logging program. Specification : Temperature:311 ¨h(155 ) Pressure :14503.8 psi (100 mpa) Data transmission:430 kbps/100 kbps Accuracy: Vertical resolution : 0.75 ms/m or < 2% 1.81 in., 23.62 in., 47.24 in. (30cm, 60cm, 120cm) Investigation depth:9.84 in., 19.69 in., 29.53 in., 59.05 in. 88.58in. (25cm50cm75cm150cm225cm) Applications: Accurate formation resistivity measurement with three vertical resolutions and five investigation depths Accurate oil/water saturation evaluation (both oil saturation and residual oil saturation) Thin layer analyses in laminated reservoirs Oil/water zone identification by resistivity profile images in many difficult cases, like deeply-invaded formations etc. Resistivity measurement in oil-based mud or air-filled boreholes.
Grades: j55, n80-1, n80q, l80, c95, p110
Grades: PSL1B Standard: API 5L