Use: This unit is used to vacuum-pump of the electrical vacuum device in transformer substation, administration of power supply, power generation plant, and transformer manufactory, and it can vacuum pump in vacuum melting, welding, drying, chemical pharmacy. ZJ operates in vacuum degree of 133Pa, and its limit vacuum degree is 5Pa. But it is are unsuitable for pumping toxic gas, explosive gas, high-oxygen content gas, high-moisture content gas, and the gas which will be reaction to pump oil or cause erosive effect on ferrous metal. Feature: (1)Quick starting, high pumping rate, stable performance, easy-handling. (2)The unit takes Roots Pump as main pump and spinning vacuum pump as pre-stage pump. (3)A vacuometer is used to meter and control vacuum of pumped container. (4)The unit adopts French Schineider Electric as control element. (5)Full-automatic and non-presence of operation with lamps indicating the condition of operation. (6)Humanization design, low noise, less energy expenditure, economical to circulate cost. Optional mode: (1)Available in mobile option, stationary option, and car-carrying option. (2)Kinds of purifiers can be made hermetical, open or canopy-covering. (3)The client's requirements can be met by adopting PLC intelligent and displaying dynamically. Wooden case.
Application: This kind of purifier is applicable to purification of various used black engine oil from transport facilities such as ship and automobile. This machine can remove the tiny impurities dispersed in oil such as carbon particles and deep oxides, as well as bad substance such as colloid and bitumen. Thus, the clarity of oil is recovered and the color of used black engine oil is restored. Features: 1. This machine adopts physical & chemical theory to get the refined and regenerated oil. 2. with the special waste gas collecting and absorbing device, this machine can stop most of the harmful gas going into the air and be friendly to the environment. 3. The fine filtering system use fully-automatic filter press with liquid press method to remove impurities, which have big area to filter impurities and can be operated and maintained easily. 4. The advanced fully-automatic temperature controlling system, liquid-level controlling system, defoaming controlling system, pressure protecting system and excellent equipment can ensure operation of the machine with high performance. 5. Indirect heating used by the heating system to ensure waste oil to be heated evenly and the temperature of waste oil to be stable. 6. The vacuum system is used for high-level removing the micro water and the left gas of the waste oil. 7. This machine also installed phase-sequence and open-phase protection and creepage-proof protection. Technical Parameter List Name Unit ZLE-ó± ZLE-ó= ZLE-ó= ZLE-ó( Capacity Kg/D 1000-2000 2000-4000 4000-8000 8000-16000 Recovery Rate % 80-95 (or follow requirement of waste oil ) Working Pressure Mpa í_0.4ú¡0.6 Noise dB(A) í_65ú¡80 Power Supply V/Hz 380/50ú¿or at userí»s optionú¬ Whole Power KW 55 70 90 120 Weight KG 2500 3500 5000 8000 Remark The capacity is based on that the oil purifier works 8-16 hours per day. Wooden case.
Use: TY is applicable for thermoelectric generating set, hydroelectric generating set, nuclear power plant, industrial turbine set and other industries where the turbine oil is used. It can purify the turbine oil before the oil deteriorates. TY is good at emulsion breaking, dehydration and removing water, gas, soap, gelatin, acid, pigment and metal particulates in emulsified turbine oil and low-viscosity lubricating oil, which can recover the emulsified turbid oil to limpid and clear oil. After treatment, the oil quality index can meet the requirement of the Quality Standard GB/T7596-2000 for Turbine Oil In-Service, which ensures that the unit regulating system and lubrication system work normally, and prolongs the maintenance period. Feature: * It has the coalescence and separation technique, and three-dimensional flash distillation technique, and it has strong ability to break emulsion and remove water from the oil. * Latest Chinese and international process which is an integration of gravity method, evaporation method, aggregation method, vacuum separation and mechanical purification. * Precise multi-stage filtration system helps to remove different kinds of impurities with high quality filter element of better ability of containing pollutants and long service life. * Optimized electric heating system with automatic constant temperature controller ensures that oil temperature to be even and stable. * An advanced fully automatic temperature controlling system, liquid-level controlling system, defoaming controlling system, pressure protecting system and excellent equipment can ensure operation of the equipment with high performance. * It can purify any kinds of turbine oil used in steam turbine and water turbine online and onsite, and with its lamps indicative of the conditions for operation. * Chain safety protection system, an interlocking of oil drainage system, vacuum system and heating system, which avoids any possible negative impacts caused by incorrect manipulation. * It is humanization design with low noise, deep purification and longtime free maintenance to save cost from the running process. Optional mode: * The customer's request can be met by adopting PLC intelligent and displaying dynamically. * The filtrated oil testing equipment can be collocated. * The whole set of this machine can be made mobile, immovable and car-carried. * All types of filter can be offered hermetical, canopy-covering or open-air. * Various sizes and configuration (alloy shield) are available. Wooden case.
1. Simple in operation,convenient in moving and high efficient in oil treatment. 2. As the new technology, vacuum-segregating (Patent No. ZL200420061085.6) employs particular spinning disk and stainless steel machine with dehydration and air pump and enlarges the area of segregating and coming to three-dimensional evaporation so that obtain the enough time to boil away. In this way purifier could achieve the best effect. 3. Using new type of heating equipment (Patent No. ZL02276238.8), it can reduce heating burthen and extend oil life. 4. Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil. Spurting oil phenomena is never appeared. 5. With advantages of no leakage,low noise and long using life, this series of products adopt special input-oil pump which be airproofed by our factory. 6.In order to meet customer's needs of choosing right filter, we have scientific. Wooden case.
The ZZ series vacuum oil injector is made on the basis of Yuneng's long-term experience in treating various kinds of high-purity transform oil and turbine oil. It can meet, to the greatest extent, the needs of vacuum oil injection and supplementation of various types of electric transmission and transformation. Export standard packing.
Screw oil presses & their spare parts for oil mills to crush the seeds.
Model: SYP1016-1D Standard: GB/T 510, GB/T 3535, ASTM D852, ASTM D97 Purpose: It is suitable to determine the solidification and pour point of transformer oil. Lubricant oil and light fuel oil. Technical specification: 1. Refrigeration speed: 10 min more than 40 centigrade 2. Refrigeration depth: -60 centigrade 3. Solidification point repeatability: +/- 1 centigrade 4. Pour point repeatability. Feature: LCD display, semiconductor refrigerator, detect speed quick, separate detection solidification point and pour point, or detect solidification & pour point at the same time. One unit for two application, insert oil, detect and print data auto. Wooden case.
After many years of study, we design YUNENG DYJC on-line purification plant which is mainly used in the field of the turbine and the lubricant set. We can satisfy our customers because of kinds of purification way. There is particular patent technique of double-system in vacuum. Their characteristics are: 1. dehydration in vacuum which can reduce water content to ú+50ppm in oil. 2. Particular fluid control system (vacuum pump will not spew oil in the long time function). 3. Credible double system design (one spare, one apply). 4. auto-control or manual-control in the field and remote-control junction port has been left to upgrade the system. 5. de-acid and de-color by the use of the collection-dehydration port. The system runs credibility and has high stability. You can auto-control or manual-control the equipment on the field or remote. Features of Product 1. The on-line set for lubrication designed by our company have obtained patent of country (patent no. ZL200420061085.6). The system include two grade vacuum pump and two oil pump, one is in use and the other is spare, so that inspect easily. 2. The oil treatment effect of on-line purifying set could less than 50ppm. 3. The plant leaves DCS long-range control so that customers choose various ways to control such as manual, automatic and long-range control. 4. The plant also has features of ZJC-T series oil-purifier for turbine oil and JT collecting-dehydration oil purifying equipment. Wooden case.
Application: The machine can remove the water, gas and impurities in insulation oil high-efficiently, increasing the pressure force and quality of oil, make sure the electric device running safely. The machine is mainly used for electric power department and industries to deal with various oils such as transformer oil, mutual oil, switch oil, dielectric oil and so on. The machine is especially for purifying the insulation oil in all kinds of large power equipments that are above 110kv. Feature: 1. This machine is high effective and portable, which is very suit to operate on line. Also it can be used to dry the electric equipment and input the oil into the electric equipment under the vacuum state. 2.The machine adopts the double-infrared liquid automatic controller, sensitive automatic pressure protector and the high effective equipment for degas, so it is easy to operate. 3. High vacuum limiting vacuum less than 5pa, working vacuum less than 35pa. 4. High absorption speed, absorption speed power more than 333l/sr. 5. Duplex 3d stereo-evaporation technology, eliminating the liquid water very effectively. 6. UK g technology by which the trace water that is show chain, such as dissolved water, can be removed effect. 7. Distinctive removing impurities technology filtering through double fh trapezoidal network and absorbing by high polymer without the mechanical power. 8. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after treatment. 9. The oil of any grades can be treated on line at the working site. Advantage: Comparing with the single-stage vacuum oil purifier, this machine dewaters, degases and removes impurities more quickly, more completely and make the oils limiting voltage-withstand value much higher. As the bridge-type vacuum linking system that can filter and be an independent vacuum power supply, this machine can be vacuum treating the electric insulating devices. Wooden case
With the advantages of being compact in structure, simple in operation, convenient in maintenance and low in application cost, the series are new necessary products used in power mining enterprises, especially when their oil are used in electric equipments, such as transformeríó mutual inductor and switch etc. The purifier can remove free water, free air and particulate contamination, and can make the filtered oil reach or be close to the standard of the new oil. The product could also be operated together with BJ-series to treat aging and waste oil. So it is your ideal assistant without doubt! Features of Product 1. Simple in operation, convenient in moving and high efficient in oil treatment. 2. As the new technology, vacuum-segregating (Patent No. ZL200420061085.6) employs particular spinning disk and stainless steel machine with dehydration and air pump and enlarges the area of segregating and coming to three-dimensional evaporation so that obtain the enough time to boil away. In this way purifier could achieve the best effect. 3. Using new type of heating equipment (Patent No. ZL02276238.8), it can reduce heating burthen and extend oil life. 4. Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil. Spurting oil phenomena is never appeared. 5. With advantages of no leakage, low noise and long using life, this series of products adopt special input-oil pump which be airproofed by our factory. 6.In order to meet customer needs of choosing right filter, we have scientific design and exact filter assemblies which could exchange by ones abroad. Both cost and oil disposal effect are good. In wooden case.
Cleanness and sanitation Convenience, safety, quiet Three heat settings With automatic thermostat High thermal efficiency, no noise, no peculiar smell Multidimensional heat radiation, with indicator light of running status 45x17x65cm
With the material that is compatible with the fire-resistant oil and dehydration in vacuum, new particle-filter for removing pollutant, the technique for absorption of the acid constituents in the treated oil, series of kyj oil-purifier for fire-resistant oil are especially designed for the use of the fire-resistant oil. They have the functions of purifying and filtering the qualified fire-resistant oil in advance, re-purifying and re-filtering the slight pollutant fire-resistant oil, recyclable filtering the mid-degree pollutant fire-resistant oil. The series are the indispensable filter equipment when fire-resistant oil is having used. They can be applied to operate on-line, filter movable and add new oil, and extend the lifetime of fire-resistant oil, maintain security of the machine and save power. Features of product 1. The plant is all made of stainless steel with features of handinessíónice appearance and easy operation. 2. The plant adopts the elements of vacuum adsorption which could eliminate the acid of water in the oil. 3. Oil level control adopt photoelectric way which the main components is imported from switzerland and have features of sensitive control, exactitude. Spurting oil phenomena is never appeared. 4. The exacting filter assembly employee the specialized ones which have a good effect for impurity controlling (could reach the nas 5-6 grade). It will satisfy clientí»s using requirement
Model: c series cmd1687sk-g (1product, 1 nozzle, 1 flowmeter) Pump--type:potary vane type u102-a Inlet pressure:>54kpa Delivery speed is 50 l/min The suction distance is 6m Flow meter--type:4 piston type u101-b Measuring accuracy is 0.25%, Pressure loss is under 0.25kgf/cm2. Motor: 220v 50hz, 0.75w(380v to be optional) Nozzle: auto shut-off nozzle Enviromental condition:-40 to 50f¦ Control type:solenoid valve control type Preset: function provided(small lcd indicator) Display---type: lcd and bright backlight Digit of volume:0-999.999 Digit of amount:0-999.999 Digit of unit price:0-9999 Digit of total range: 0-99, 999, 999.99 Weight:205kg Packing size: 1120*530*2290mm(length*thickness*height) 44 sets in one 40ft container
It's a new-type of high effective vacuum oil purifier with the duplex 3d stereo-evaporation technology and g technology.Adopt the technology, which remove the impurities through double fh trapezoidal network and absorbing by high polymer without the mechanical power.So it's five or eight times as effective as the common vacuum oil purifiers.The consumption of energy is low and doesn't require other wearing materials. 230kg;1050x750x1300mm
Standard : Api 7, api 7-1 and sy/t standards. Material : Aisi 4145 h or non-magnetic material. Types: Slick drill collars / spiral drill collars / non-mag material drill collars Size : Od : 3 1/8''---11'', length : 10'---31' Sea worthy package
Model: f series cmd1687sk-gb6(3product, 6 nozzle, 3 flowmeter) Pump--type:potary vane type u102-a Inlet pressure:>54kpa Delivery speed is 50 l/min The suction distance is 6m Flow meter--type:4 piston type u101-b Measuring accuracy is 0.25%, Pressure loss is under 0.25kgf/cm2. Motor: 220v 50hz, 0.75w(380v to be optional) Nozzle: auto shut-off nozzle Enviromental condition:-40 to 50íµ Control type:solenoid valve control type Preset: function provided(small lcd indicator) Display---type: lcd and bright backlight Digit of volume:0-999.999 Digit of amount:0-999.999 Digit of unit price:0-9999 Digit of total range: 0-99, 999, 999.99 Weight:350kg Packing size: 1860*680*2195mm(length*thickness*height) 17 sets in one 40ft container
Model: k series cmd1687sk-g22(1product, 2 nozzle, 2flowmeter) Pump--type:potary vane type u102-a Inlet pressure: í²54kpa Delivery speed is 55ía5 l/min The suction distance is 6m Flow meter--type:4 piston type u101-b Measuring accuracy is 0.25%, Pressure loss is under 0.25kgf/cm2. Motor: 220v 50hz/60hz, 0.75w(110v 380v to be optional) Nozzle: auto shut-off nozzle Enviromental condition:-40 to 50íµ Control type:solenoid valve control type Preset: function provided(small lcd indicator) Display---type: lcd and bright backlight Digit of volume:0-999.999 Digit of amount:0-999.999 Digit of unit price:0-9999 Digit of total range: 0-99, 999, 999.99 Weight:280kg Packing size: 1180*650*2020mm(length*thickness*height) 29 sets in one 40ft container
Model: s series cmd1687sk-g22(1product, 2 nozzle, 2 flowmeter) Pump--type:potary vane type u102-a Inlet pressure:>54kpa Delivery speed is 50 l/min The suction distance is 6m Flow meter--type:4 piston type u101-b Measuring accuracy is 0.25%, Pressure loss is under 0.25kgf/cm2. Motor: 220v 50hz, 0.75w(380v to be optional) Nozzle: auto shut-off nozzle Enviromental condition:-40 to 50 Control type:solenoid valve control type Preset: function provided(small lcd indicator) Display---type: lcd and bright backlight Digit of volume:0-999.999 Digit of amount:0-999.999 Digit of unit price:0-9999 Digit of total range: 0-99, 999, 999.99 Weight:247kg Packing size: 1390*620*2375mm(length*thickness*height) 27 sets in one 40ft container
Model: p series cmd1687sk-g(1product, 1 nozzle, 1 flowmeter) Pump--type:potary vane type u102-a Inlet pressure:>54kpa Delivery speed is 50 l/min The suction distance is 6m Flow meter--type:4 piston type u101-b Measuring accuracy is 0.25%, Pressure loss is under 0.25kgf/cm2. Motor: 220v 50hz, 0.75w(380v to be optional) Nozzle: auto shut-off nozzle Enviromental condition:-40 to 50íµ Control type:solenoid valve control type Preset: function provided(small lcd indicator) Display---type: lcd and bright backlight Digit of volume:0-999.999 Digit of amount:0-999.999 Digit of unit price:0-9999 Digit of total range: 0-99, 999, 999.99 Weight:205kg Packing size: 1120*530*1615mm(length*thickness*height) 44 sets in one 40ft container 22sets in one 20ft container
Model: d series cmd1687sk-g (1product, 2 nozzle, 2 flowmeter) Pump--type:potary vane type u102-a Inlet pressure:>54kpa Delivery speed is 50 l/min The suction distance is 6m Flow meter--type:4 piston type u101-b Measuring accuracy is 0.25%, Pressure loss is under 0.25kgf/cm2. Motor: 220v 50hz, 0.75w(380v to be optional) Nozzle: auto shut-off nozzle Enviromental condition:-40 to 50íµ Control type:solenoid valve control type Preset: function provided(small lcd indicator) Display---type: lcd and bright backlight Digit of volume:0-999.999 Digit of amount:0-999.999 Digit of unit price:0-9999 Digit of total range: 0-99, 999, 999.99 Weight:205kg Packing size: 920*595*2175mm(length*thickness*height) 40 sets in one 40ft container 22 sets in one 20ft container
