Steel Mesh
Rectangular Mesh products in 6.0m x 2.4m sheet sizes are general-purpose ribbed mesh sheets used to reinforce concrete slabs. *SPECIFICATIONS* Material Carbon Steel Grade 500 Mpa Length 6000mm x 2400mm Main Wire: 6.75@100, 7.60@100. 8.60@100, 9.50@100, 10.70@100, 11.90@100 mm Cross Wire: 7.60@200 mm *STANDARDS* Manufactured in accordance with AS/NZS 4671:2019 ACRS Certified NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS) *PACKAGING* Unit of Measure Sheets Pack Type Bundles FCL Quantity 25MT
HINGE JOINT FENCING WIRE MESH SHEEP GOAT CATTLE RURAL FARM GALVANISED FENCE Hinge joint fence offers high strength against the violent clashing of horses and other animals to ensure the safety. The zinc coating layer adds corrosion and rust resistance for the fence. Good flexibility, good pressure resistance, weather resistance properties, long service time. Even the cut pieces will not deform under pressure. Hinge joint fence is a kind of mesh used in cattle, goat, deer and pig. It is used for grassland, protection of ecological projects, Papadopoulos grassland, forestry, highway and environment. sports venues fence, the road network of green belt protection.
The manufacture of spunbond nonwoven fabric involves a continuous process, which covert thermoplastic raw material (polypropylene), into a web composed of continuous filaments. The polypropylene granules are melt-spun through jets into thousands of fibers with a diameter of +/-20 microns (2.8-3.0 dtex). These very fine filaments are uniformly laid down into random three – dimensional structure. The web is then presented to a calendar, which thermally bond the web in consolidated spunbond fabric. As per client request
Acrylic tube 2metre/per piece 4metre, 6metre, cut size from customized The packing details follow my company standard
Acrylic rod Use for lighting, furniture, night club etc. Pp bag packing per piece.More details follow our company standard.
Cow split leather work gloves, green leather reinforcement on palm, natural drill cotton on back and safety cuff grade. Weight: 212 grams/pair. Width: 13cm, Length: 27cm..Size 11
Natural cow split leather work gloves, patched or full palm, yellow drill cotton on back and rubberized cuff. Weight: 182 grams/pair. Width: 13cm, Length: 28cm Size 11.
Cow split leather work gloves, green leather reinforcement on palm, natural drill cotton on back and safety cuff grade. Weight: 212 grams/pair. Width: 13cm, Length: 27cm. Size 11. Quantity: 12024 pairs.
Natural cow split leather work gloves, patched or full palm, yellow drill cotton on back and rubberized cuff. Weight: 182 grams/pair. Width: 13cm, Length: 28cm Size 11.
01. The hydraulic filter element is used in the hydraulic system to filter out particles and rubber impurities in the system to ensure the cleanliness of the hydraulic system. When refueling, the hydraulic oil must be filtered, and the refueling tools should be clean and reliable. The filter at the filler port of the hydraulic oil tank cannot be removed in order to increase the fueling speed. Fueling personnel should use clean gloves and work clothes. 02. Ensure that the hydraulic oil is not used at high temperatures; the oil will quickly oxidize and deteriorate at high temperatures; the air filter on the hydraulic station should use a filter that can filter both particles and moisture; it is sold on the market; 03. The cleaning oil of the hydraulic system must use the same brand of hydraulic oil as the system used, and the oil temperature is between 45~80â??. Use a large flow to remove the impurities in the system as much as possible. The hydraulic system should be cleaned more than three times repeatedly, and all of it will be discharged out of the system when the oil is hot after each cleaning. After cleaning, clean the filter again, and add new oil after replacing the new filter element. Supplementary note: The filter element is originally a consumable product, and it needs to be replaced immediately after it is usually blocked. Pay attention to the system oil tank and pipelines to be flushed clean. When refueling, pass through a refueling device with a filter. Do not let the oil in the tank directly contact the air. Do not mix new and old oils. It is helpful to extend the service life of the filter element.
Manufacturer Henan UTERS Industrial Technology Co.,Ltd Brands UTERS / Negotiable Filter Type Hydraulic Oil Filter Element Size Data Please contact our sales manager if you need to confirm parameters. End caps Material Galvanized Carbon Steel; Stainless Steel; Nylon Plastic; Aluminum Machining And Other Standard Materials Frame Material Galvanized Carbon steel punching frame; stainless steel punching frame, etc. Filter Material 304 Stainless Steel Mesh; Glass Fiber; Oil Filter Paper And Other Standard Materials Filter Accuracy 1~100um; filtration ratio: Xâ?§100. Collapse Pres. 21bar~210bar Filter Media Conventional Hydraulic Oil, Lubricating Oil, Fuel, Etc. Operating T. -30â??~+100â?? Structure Strength 1.0Mpa, 2.0Mpa, 16.0Mpa, 21.0Mpa. Position On the suction line, pressure oil line, return line, bypass, and separate filter system. Application Steel, Electric Power, Metallurgy, Shipbuilding, Aviation, Papermaking, Chemicals, Machine Tools And Construction Machinery, Construction Machinery And Other Fields. Packing Plastic bag inside,paper box outside / Negotiable Transportation DHL, UPS, FEDEX, SF And Other International Express, By Air, By Sea, Or Special Line Services. Production Time 10 Work Days After Payment / Negotiable Warranty 12 months/ 365 days after shipment. Testing Standard ISO 2941 Filter element-Test method for filter element rupture resistance ISO 2942 Filter Element-Test Method for Structural Integrity of Hydraulic Filter Element ISO 2943 Filter Element-Test Method for Compatibility of Hydraulic Filter Element Material and Liquid ISO 3723 filter element-end-to-end compliance test ISO 3724 filter element-determination of fatigue characteristics ISO 3968 Filter Element-Differential Pressure Flow Characteristics ISO 4572 Filter Element-Multiple Pass Method for Determining Filtration Characteristics
Instructions for use 01. The hydraulic filter element is used in the hydraulic system to filter out particles and rubber impurities in the system to ensure the cleanliness of the hydraulic system. When refueling, the hydraulic oil must be filtered, and the refueling tools should be clean and reliable. The filter at the filler port of the hydraulic oil tank cannot be removed in order to increase the fueling speed. Fueling personnel should use clean gloves and work clothes. 02. Ensure that the hydraulic oil is not used at high temperatures; the oil will quickly oxidize and deteriorate at high temperatures; the air filter on the hydraulic station should use a filter that can filter both particles and moisture; it is sold on the market; 03. The cleaning oil of the hydraulic system must use the same brand of hydraulic oil as the system used, and the oil temperature is between 45~80â??. Use a large flow to remove the impurities in the system as much as possible. The hydraulic system should be cleaned more than three times repeatedly, and all of it will be discharged out of the system when the oil is hot after each cleaning. After cleaning, clean the filter again, and add new oil after replacing the new filter element. Supplementary note: The filter element is originally a consumable product, and it needs to be replaced immediately after it is usually blocked. Pay attention to the system oil tank and pipelines to be flushed clean. When refueling, pass through a refueling device with a filter. Do not let the oil in the tank directly contact the air. Do not mix new and old oils. It is helpful to extend the service life of the filter element.
We specialised in supplying industrial pumps, valves and spares. All type of Pumps and Accessories - Vertical or Horizontal Centrifugal pumps - Submersible pumps - Diaphragm pumps - Gear pumps All types of Valves and Accessories - Manual Valves : Butterfly, Ball, Globe, Gate & Knife Gate, Plug, Check valves - Pneumatic Rotary Actuator operated Valves, Pneumatic Diaphragm & Cylinder operated Control Valves, Soleniod Valves - Accessories like Actuators, Positioners, Limit Switch, Air lock valve and fittings Also supply all kinds of spares for pumps, vales and rotary equipment including - O Ring, and Seals - Bushing, impeller, shaft etc
Belt conveyers Serial number Models Capacity Main Facilities/Amount Bucket Feeder Coarse Crusher Vibrating Screen ( Single) Toggle Crusher Cone Crusher Impact Crusher Viberating Screen (Turnoff) Belt Comveyor(m) Electric Control Unit Installed Capacity(kW) 1 50 1 - PE-400/1 - PEX-250x1200/1 - - ZYKJ-1245/1 90-120 1 120 - - PF-A-1010/1 170 2 80 1 WQB-300x70/1 PE-500x750/1 - PEX-250x1200/2 - - 3YKJ-1545/1 120-140 1 210 - PYB-1200/1 - 245 ó= - - PF-C-1214/1 265 3 100 1 ZSW-380x95/1 PE-600x750/1 PE-600x900/1 YKJ-1535/1 PEX-250x1200/3 - íí 3YKJ-1545/1 130-150 1 310 - - PF-C-1214/2 370 ó= - PYZ-900/1 - 365 4 150 1 ZSW-490x110/1 PE-750/1 - PEX-300x1300/1 PYB-1200/1 - 3YK-2160/1 180-210 1 458 - PYB-1750/1 - 440 ó= PEX-300x1300/3 - - 550 ó( - - PF-1310/2 590 ó) PEX-300x1300/1 - PF-1315/1 615 5 200 1 ZSW-490x110/1 PE-800x1060/1 - - PYB-1200/2 - 2YK-1854/1 2YK-2160/1 200-230 1 550 - - PF-1315/2 PF-B-1210/1 720 ó= PEX300x1300/4 - - 770 6 250 1 ZSW-590x130/1 PE-900x1060/1 PE-900x1200/1 - - PYB-1750/1 PYB-900/1 - 2YK-2160/2 220-250 1 550 PEX-300x1300/1 PYB-1750/1 - 530 7 300 1 ZSW-590x130/1 PE-900/1 DF-1854 PEX-300x1300/5 - íí 2YK-2460/1 2YK-2160/1 180-200 1 800 - PYB-1750/1 PYZ-1750/1 íí 725 ó= - - PF-C-1214/2 PF-1315/2 920 8 350 1 ZSW-600x130/1 PE-1000x1200/1 DF-1854/1 - PYB-2200/1 PF-1214/1 2YK-2460/1 2YK-2160/1 200-250 1 900 - - PF-1310/4 9409 ó± 400 1 ZSW-600x150/1 PE-1200x1500/1 DF-1854/1 - PYB-2200/1 PYB-1200/1 - 2YK-2460/1 2YK-1854/2 250-300 1 960 PF-1315/2 PF-1310/2 1110 PYB-2200/1 PF-1310/1 1085 10 450 1 ZSW-600x150/1 PE-1200x1500/1 DF-1854/1 PEX-300x1300/2 PYB-2200/1 - 2YK-2460/1 2YK-2160/2 280-320 1 1120 PF-1315/4 1310 PYB-2200/1 PF-1214/2 1050 11 500 1 BW-150x6/1 PE-1200x1500/1 DF-1854/1 - PYB-2200/1 PYB-1750/1 - 2YK-2460/2 300-350 1 1025 PYB-2200/1 PF-1310/2 1165 12 600 1 BW-150x6/1 PE-1200x1500/1 DF-1854/1 - - PF-1315/4 PF-1310/2 2YK-2460/2 2YK-2160/1 320-380 1 1680 PEX-300x1300/4 PYB-2200/1 - 1130 PYB-2200/1 PF-1315/2 1260 13 800 Made by the request of the consumer
Pickled pelt sheep
Gloves
Rotary airlock & feeders RL series valves is a Simple, Stable, Elegant & Plug N Play Rotary Airlock & Feeders RL Series Valves are the embodiment of Anvals Simple design solutions, offering low maintenance and off the shelf airlocks for wide range of dust collection applications. RL Series airlock & feeders valves are cost-effective and robust in design. The airlock & feeders valves are available in opening sizes ranging from 150 mm to 300 mm with Universal Flanges to suite both Square and Circular mating flanges. The labyrinth sealsâ?? ensures perfect sealing of rotating shaft thus ensures zero leakage through shaft ends. These labyrinth seals even effective with highly abrasive products and also when there is high pressure across the system. This â??single pieceâ?? cast design has all of the advantages of Cast Iron over traditional mild steel including superior corrosion resistance, better wear properties and thermal stability. RL Series airlock & feeders valves can handle a maximum capacity of 33.6 m³/hr
TORUS PET Standard Filters use high quality activated carbon to remove impurities, to ensure your pet has access to clean, fresh, water. Our Standard Filters improve water clarity, reduced unpleasant odors, and removes chlorine, chloramine, tannins, phenol, hydrogen sulfide and some other compounds that cause odors Standard Filters comprise a molded cone with perforated walls which allow water to flow-through whenever your pet drinks and lasts for approximately one-month. So each replacement pack of six filters gives your pet approximately six-months of fresh, clean water.
The All New "SaveOil" Bypass Oil Filtration technology. Clean and purified Oils do "not" need changing.! By removing contamination, fine particles as small as 1 micron, and "liquids" such as water, fuel, glycols, acids, etc., your Oils (both Engine Oils and Hydraulic Oils), will remain serviceable and in good working condition for much, much longer periods. The SaveOil Bypass Oil Filtration technology will ensure that your Oils (Engine and Hydraulic) will remain in top condition. Just change the Filters, not the Oils.!! The SaveOil Filter will collect solid particles down to 1 micron, and the patented Evaporation Heating chamber will remove the liquid contaminants. This special technology will save you money;!! All hardworking engines need to be regularly serviced to ensure that the engine Oils are doing their slippery best to maintain the integrity of the engine moving parts; the problem with oils is that they get dirty and the current filtration systems, do not keep the Oils clean as they only filter out particles in the 25 to 35 micron range and above.! Therefore filters have to be changed and oils have to be replaced, which is expensive.! BUT, with the SaveOil Bypass Filter technology, you do NOT change the Oils, you only change the Filters.!! Please Download Brochure! By using our SaveOil Bypass Oil Filtration system, you will ensure that the existing Engine Oils will have a much longer life span, due to the unique features of the SaveOil Bypass Oil Filtration Technology; - The special Cotton Filter will filter out particles as small as 1 micron.! - The special Evaporation Heating Chamber removes damaging water, fuel, acids, glycol, etc. Advantages of the SaveOil Bypass Oil Filter: Diesel FUEL savings: because our filtration system keeps the Engine OILS clean and retaining high lubricity, we are achieving a 4% to 8% fuel efficiency in the running of these Engines; this gives significant cost savings over the operating life of your Engines. Engine OIL savings: our superior filtration, together with our patented Evaporation of liquids technology, keeps the Engine OILS clean and pure for a much longer and extended period; this means that the Engine OIL is being used longer, allowing for greater Environmental benefits of reduced OIL consumption and less pollution from the waste old OIL.!!
