Aluminium Plates Scrap Suppliers and Manufacturers

We are a supplier of Aluminum scrap. Aluminum scrap, 6063 Extraction & UBC can scrap we can supply all kinds of Aluminium Scrap. payment by LC.

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

HS Code 76020090 PRICE = US$3000/TON CIF ORIGIN: SOUTH AFRICA PACKAGE:,50KG MIN ORDER:200TONS DESCRIPTION Aluminum scrap is often categorized as â??new scrapâ?? from production processes and â??old scrapâ?? from post-consumer use. New scrap arises during the manufacturing of aluminum semi-fabricated and final products. Old scrap refers to those products collected after disposal by consumers.  

Aluminium Scrap Such As Engine Block, Ubc, Wire, Motor Scrap Etc.

Item Quality standard AL 99.7% Si 0.25 % Fe 0.40% Cu 0.05% Mn 0.05% Mg 0.05% Ti 0.03% Zn 0.10% Packaging Detail: 1. Compressed into rectangular block 2. 50kgs/bag, 1000kgs/bag 3. 50kgs/bale, 50kgs/bundle 4. 20mt/20'fcl, 25mt/40'fcl Aluminum Wire Scrap,Aluminium Scraps Item: Aluminium scrap 6063 Aluminum scrap Aluminum wire scrap Aluminum scrap UBC(Used Beverage Cans) Aluminum wheel scrap Aluminum tense and tabor Aluminum content 75%, 95%, 99%, 99.7% Technical Process (Mould DesigningMould Cutting Mould Testing Mould Workshop Mould Heating) Extruding (Aluminium Ingot&Supplementary Materials Smelting Homogenizing Bar Heating ) Aluminum wire scrap Composition

TEM VALUE RESULT(%) - Al Margin - 98.32% Si - 0.20-0.60 % 0.37% Cu - 0.10% 0.09% Mg - 0.45-0.9 % 0.60% Zn - 0.10 % Max 0.10% Mn - 0.10 % Max 0.10% Ti - 0.10 % Max 0.10% Cr - 0.10 % Max 0.10% Fe - 0.35 % Max 0.15% Sum - 0.15 % Max 1.70%

Aluminium Wire Scrap

Aluminium Ubc Scrap

Aluminum Wire Scrap 99% We offer quality Aluminum Alloy Wheel Scrap at very cheap price which will suite our customers all around the world. Aluminum Alloy Wheel Scrap Grade: Aluminium Application: Scrap Alloy or not: Alloy Features: Free from Nuts, Steel plate, paint Material : 14 inch/ 15inch / 17inch / 18inch / Appearance: Silvery White Al content: >98% CONTACT US FOR MORE DETAILS AND QUOTATIONS.

Aluminum content 75%, 95% 99.7% 99.9% 1.Aluminum wire scrap 2.Reasonable price and high purity 3.Timely delivery and promptly shipping Density: 2.702g/cm�³ Melting point: 660.37�ºC Boiling point: 2467.0�ºC Color: silver white Aluminum scrap 6063 Aluminum profile scrap 6063 Aluminum scrap UBC The high recovery rate scrap aluminium wire with promotional price (1). Item: Aluminium scrap (2). Easy control and operation (3). Fast melting (4). Discontinuous melting with scrap (5). High efficiency (6). Stable working structure

Aluminum Extrusion 6063 Scrap Aluminum Extrusion 6063 Scrap. It is the most common alloy used for aluminum extrusions. Normally, Aluminium Extrusion 6063 Scrap shall consist of clean aluminum profile extrusions including window, shop fittings, irrigation tubes and door frames. However, it must be free of screws, iron components, plastics, rubber or other foreign materials. Chemical composition Silicon minimum 0.2%, maximum 0.6% by weight Iron no minimum, maximum 0.35% Copper no minimum, maximum 0.10% Manganese no minimum, maximum 0.10% Magnesium minimum 0.45%, maximum 0.95% Chromium no minimum, maximum 0.10% Zinc no minimum, maximum 0.10% Titanium no minimum, maximum 0.10% Other elements no more than 0.05% each, 0.15% total Aluminium ; Remainder

Item Value Place of Origin UK Brand Name Copper Wire Scrap Model Number CS11945 Type Copper Wire Copper Content 99% MOQ 100 Tons Appearance Red color Cu Content (%) 99.998% Purity High Purity

Specification for Aluminum Scrap 1. Scope This specification defines the quality and requirements for aluminum scrap intended for recycling and manufacturing. It ensures consistency, quality, and suitability for various applications. 2. Material Requirements 2.1. Composition Aluminum Content: Minimum 90% by weight. Contaminants: Maximum 2% by weight of non-aluminum metals (e.g., steel, copper). Maximum 1% by weight of non-metallic materials (e.g., plastic, rubber). Moisture content should not exceed 2% by weight. 2.2. Form and Condition Types: Can include profiles, sheets, turnings, wire, and castings. Size: Must be manageable for handling and processing, typically not exceeding 1 meter in any dimension. Cleanliness: Free from excessive oil, grease, and other foreign substances. 3. Packaging and Labeling Packaging: Scrap should be securely packaged or bundled to prevent scattering and contamination during transport. Packaging materials should not contaminate the scrap. Labeling: Each package should be clearly labeled with: Supplier name and address. Net weight. Scrap grade and type. 4. Inspection and Testing Visual Inspection: Performed to check for visible contaminants, appropriate size, and cleanliness. Chemical Analysis: Periodic testing to verify aluminum content and contaminant levels. Moisture Test: Conducted to ensure moisture content compliance. 5. Documentation Certificate of Analysis (CoA): Provided with each shipment, detailing the chemical composition and confirming compliance with this specification. Bill of Lading: Including details of the shipment, weight, and scrap grade. 6. Compliance and Rejection Compliance: All supplied scrap must meet the requirements outlined in this specification. Rejection: Material not meeting these requirements will be subject to rejection and return at the supplier's expense. 7. Safety and Handling Handling: Appropriate safety measures should be taken to prevent injury or contamination during handling and transportation. Personal Protective Equipment (PPE): Workers must use suitable PPE, including gloves and eye protection. 8. Environmental and Regulatory Considerations Compliance: Must comply with all relevant local, national, and international regulations regarding waste and recycling materials. Environmental Impact: Suppliers are encouraged to follow environmentally friendly practices in the collection and processing of aluminum scrap.

aluminium scrap is categorized as new scrap and old scrap New scrap arises during the manufacturing of aluminium semifabricated and final products Old scrap refers to those products collected after disposal by consumers It is the perfect product for many customers even for those with specific needs that do not need pure aluminium We supply from all over the globe and have relationships with recycling associations spread across various continents

Aluminum Specification: Aluminum is a lightweight, silvery-white, and ductile metal known for its high corrosion resistance, excellent thermal and electrical conductivity, and versatility in various applications. It is commonly used in industries such as aerospace, construction, automotive, and packaging. Physical Properties: Density: Approximately 2.70 g/cm�³ Melting Point: 660.3�°C (1220.5�°F) Boiling Point: 2519�°C (4566�°F) Mechanical Properties: Tensile Strength: Varies with alloy, typically ranging from 70 to 700 MPa Yield Strength: Varies with alloy, typically ranging from 30 to 500 MPa Elongation at Break: Varies with alloy, typically from 1% to 30% Hardness: Varies with alloy, typically from 20 to 120 HB Chemical Composition: Pure aluminum is composed of 99.0% to 99.9% aluminum. Common alloying elements include copper, manganese, silicon, magnesium, and zinc. Thermal Properties: Thermal Conductivity: 205 W/m�·K (at 20�°C) Coefficient of Thermal Expansion: 23.1 x 10â?»â?¶ /K Electrical Properties: Electrical Conductivity: 37.7 x 10â?¶ S/m (at 20�°C) Corrosion Resistance: Excellent resistance to atmospheric corrosion due to the formation of a protective oxide layer. Good resistance to corrosion in marine environments and many industrial chemicals. Formability and Machinability: Highly ductile and can be easily formed into various shapes through processes like rolling, extruding, and drawing. Machinability varies with the alloy, with some aluminum alloys offering better machinability than others. Common Applications: Aerospace: Airplane fuselages, wings, and other structural components. Automotive: Engine components, wheels, and body panels. Construction: Window frames, roofing, and structural components. Packaging: Beverage cans, foil, and containers. Electrical: Conductors, wiring, and electronic components. Surface Treatment: Aluminum can be anodized, painted, or coated to enhance its surface properties and appearance. Recyclability: Aluminum is highly recyclable and retains its properties after recycling, making it a sustainable material choice. Standards and Grades: Common standards include ASTM B209 for aluminum sheet and plate, ASTM B221 for aluminum extruded bars, rods, wire, profiles, and tubes. Grades and tempers vary depending on the specific application and alloy composition.

GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. Type:Aluminum Can Al Content (%):99%-99.97% Material:99.7% Aluminium Scrap Product Name:High Purity ring-pull can Application:Recycling Material Packaging:Compressed USA scrap metals

a. Name of product: NON FERROUS SCRAP ALUMINUM b. Price of product: USD$2400~2600/MT c. Product origin: TAIWAN d. Key Specifications/Special Features: 6061 / 6063 e. Harmonization System (HS) Code :76020010 f. Minimum Order Size : 20MT g. Packaging details: EXPORTING BALE h. Monthly supply: 1000MT

We have established immense expertise in dispatching Aluminum Extrusions. We have Aluminum Extrusion 6063 that is without any attachments.

Dear All, We can supply Aluminium profiles regrind. Interested parties contact us for a detailed price offer.