Titanium Bar GR7 has excellent strength, hardness, lightweight, high-temperature resistance, low-temperature resistance, good mechanical processing performance, excellent corrosion resistance, non-magnetic and non-toxic, and good heat transfer performance. At the same time, it has memory and superconductivity. The composition of Titanium Bar GR5 is Ti-6Al-4V, which belongs to (α+β) type titanium alloy, with good comprehensive mechanical and mechanical properties. It has excellent corrosion resistance, small density, high specific strength, good toughness and weldability, and has been successfully applied in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors. The titanium round bar is mainly used in aerospace structures, engine parts, ships, medical implants and equipment, hydraulic and instrumentation pipes, cryogenic vessels, heat exchangers that require high strength. It is also used in a variety of chemical process equipment and ship and fuselage applications where corrosion resistance is required. Titanium Filler Rod is a hollow filter tube made of titanium powder by high temperature sintering. It is mainly used for titanium rod filters. It is non-toxic, non-magnetic, non-shedding, and has good bio-melting properties. Therefore, it is widely used in liquid-solid separation in food, beverage, pharmaceutical, chemical and other industries. It is especially suitable for decarbonization filtration in large infusion and injection production lines in the pharmaceutical industry. https://www.yunchtitanium.com/titanium-bar-1
There is a layer of oxidized film on the surface of titanium plate GR7, which is equivalent to a good long-term wear-resistant hair separating agent. The use of titanium plate saves the separating agent, makes the plate peeling easily, and eliminates the pre-treatment process. The plate is half lighter than the copper board. The service life of titanium plate is more than 3 times that of copper plate, which can reach 10 to 20 years according to operating conditions. The titanium plate GR7 can increase production capacity and reduce the production cost of electrolytic copper, so that it has better economic benefits. Grade 5 titanium alloy also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4titanium alloy, is the most commonly used alloy. It has excellent specific strength, excellent corrosion resistance and fracture toughness, as well as good weldability and ability to withstand extreme temperatures, and can be strengthened by heat treatment. The alloy was originally developed for the aerospace market and is widely used in aerospace structural components. Because of its very good biocompatibility, it is also widely recognized in the medical industry. Typical applications include aero-engine components, fuselage components, marine equipment, offshore oil and gas equipment, power generation, chemical industry, automotive moving parts, medical equipment, surgical implants, sports equipment. Titanium Sheet Grade 5 has excellent corrosion resistance, small density, high specific strength and good toughness and weldability. It has been successfully applied in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors. We also have ti6al4v eli and ti6al4v. https://www.yunchtitanium.com/titanium-sheet-1
Titanium is a very good metal material with high strength, low density, high hardness, high melting point and corrosion resistance. High purity titanium has good plasticity and is an ideal metal 3D printing material. 3d titanium wire is widely used in aerospace, aviation, military, light industry, chemical, 3D printing, welding, textile, electronics, superconducting, medical and petrochemical industries. As a kind of lightweight and corrosion-resistant structural material, titanium and titanium alloy have low density, high specific strength, good corrosion resistance, non-toxic and non-magnetic, low thermal conductivity, weldability and good biocompatibility. It has broad application prospects in aerospace, marine engineering, chemical, electric power, construction, automotive, medical, sporting goods and other fields. Titanium 6Al4V wire can be used in industrial welding wire, medical, sports goods, glasses, earrings, headwear, plating hangers, 3D printing, etc. Nickel Titanium Wire is used in super elastic memory alloy mobile phone antennas, fishing hooks, fishing rods, children's toy antennas, optical frames, Bluetooth headsets, ear hooks, medical equipment, etc.. With the development of the times, it began to be gradually used in women's clothing ring. We also have titanium tubing price. https://www.yunchtitanium.com/titanium-wire--1
Unalloyed Titanium Ingots Grade 2- UNS R 50400
U.S. Titanium is a professional manufacturer and supplier located in the united states, who can provide products such as titanium & titanium alloy, zirconium, tantalum, niobium, hafnium and other high performance metals. In addition u.S. Titanium has formed powerfully strategic partnership agreements with globally renowned titanium industry enterprises so that u.S. Titanium has incomparable advantages to provide the highest quality of titanium products, timely delivery, unlimited contract volume at a competitive price. Gr1, gr2, etc. According to drawing and requirements of customer
Titanium plate/sheet Grade: gr1, gr2, gr5, gr7, gr9gr12, gr16, gr17, ti-8-1-1, ti-15333 etc. Size: thk - 0.02” to 5.906”; width max - 98.4”; lmax - 472.441” Standard: astm b265, asme sb265, ams 4911, ams 4916 etc. Titanium clad steel plate / sheet / tube sheet Titanium grade: gr1, gr2, gr3(cp ti), gr7, gr16(ti/pd alloy), gr12(ti-0.3 mo-0.8 ni) Steel material: a516 gr-70, sa266, sa105, f53, Titanium clad steel plate size: (0.039"-0.394"+0.197"-4.73") thk × (=78.74") width × (=236.22")length Standard: astm b-898; Application: petrochemical, chemical, chloral-alkali, food, fertilizer, wet metallurgy, electroplating, vacuum salting making.
Titanium bar/rod Grade: gr1, gr2, gr5, gr7, gr9, gr12, gr16, gr17 etc. Size: dia - 0.315” to 7.87”; Standard: astmb348, ams4928, astm f67, astm f136, h7 tolerance is available. Titanium wire / welded wire: Grade: gr1, gr2, gr5(ti-6al-4v), gr7, gr12, Wire size: dia (0.0012”-0.236”) × straight length/ spool/ coil; Grade: erti1, erti2, erti3, erti4, erti5, erti7, erti9, erti12, erti23, Welded wire size: dia (0.002”-0.4”)× straight length/ spool/ coil Standard: astm b863, aws a5.16; According to the different production process, the titanium wire can be divided into the hot drawing titanium wire and the cold titanium wire. The titanium welding wires we supply can only be round cross section and drawn from titanium wire rods, they are made as filler metal for welding applications by arc, mig, tig procedures.
Titanium fastener Titanium bolt titanium screw titanium nut titanium thread rod Specification of titanium fastener are as follows : Gr2 and gr5 titanium bolt, screw, nuts and thread rod from m1 to m24 Grade:gr2, ti-6al-4v (gr5), gr7 Standard: din7, din912, din933, din84, din85, din963, din7991, din912, din931, iso7380 etc. A: mini screw and bolts : m1.0 to m4 as per customer’s required length or din standard. B: usual screws, bolts and nuts: m4 to m24 or bigger C: ti thread rod: m1.0 to m24 of length 1000mm. D: u.S. Titanium can produce as per customer’s drawing and special requirements. E: titanium fasteners and parts for racing motorcycles and racing bicycles. U.S. Titanium supplies large volume fasteners to chemical industries, distributor, racing bicycles and racing motorcycle industry. Titanium bolts, screws, nuts and washers can be american , metric(m0.8-m24 or bigger), and imperial standard, also can as per drawing.
U.S. Titanium clad steel plate / sheet / tube sheet Titanium grade: gr1, gr2, gr3(cp ti), gr7, gr16(ti/pd alloy), gr12(ti-0.3 mo-0.8 ni) Steel material: a516 gr-70, sa266, sa105, f53, Titanium clad steel plate size: (0.039"-0.394"+0.197"-4.73") thk × (=78.74") width × (=236.22") length Standard: astm b-898;
U.S. Titanium plate, sheet, coil, foil Grade: gr1, gr2, gr5, gr7, gr9, gr12, gr16, gr17, gr23 (6al-4v eli), Ti-8-1-1, ti-15333 etc. Coil size: thk - 0.02” to 0.118”; width max - 49.2”; Foil size: thk - 0.00098” to 0.00354” x width max - 4.72” Thk - 0.004” to 0.0098” x width max -17.7” Thk - 0.012” to 0.016” x width max -48” Size: thk - 0.02” to 5.906”; width max - 98.4”; lmax - 472.441” Standard: astm b265, asme sb265, ams 4911, ams 4916 etc.
U.S. Titanium wire / welded wire Grade: gr1, gr2, gr5(ti-6al-4v), gr7, gr12, Wire size: dia (0.0012”-0.236”) × straight length/ spool/ coil; Grade: erti1, erti2, erti3, erti4, erti5, erti7, erti9, erti12, erti23, Welded wire size: dia (0.002”-0.4”)× straight length/ spool/ coil Standard: astm b863, aws a5.16;
U.S. Titanium clad copper bar / tube / wire U.S. Titanium’s products of cladding copper with titanium and zirconium are as follow: 1) titanium clad copper rod 2) zirconium clad copper rod 3) titaniun clad copper wire 4) titanium(zirconium) clad copper round rod 5) titanium (zirconium) clad copper rectangle bars 6) titanium clad copper tube
Our company exports titanium pipes, plates, rods, and wires
Application scope recommended: Bulk paint (in emulsion); ink; plastics; dyeing and final paint; paper coating, colorful wallpaper; white shoe-polishing agent; paint (dried by air), etc. Performance and characteristics: Usable in both water and oil systems, but poorer in dispersion than special types Technical index: Item No. Quality index Result Notes 1 Tio2 content(%) 92.5 min 2 Rutile content(%) 7 min 3Whiteness6 min 4Lighting power 100 min 5Dispersion(number haegeman) 6.0 min 6Oil adsorption(g/100g)22 max 7Volatile(105°c)(%)0.5 max 8Residue on sieve(%)0.02 max 9Water soluble substance(%)0.5 max 1Ph value of aqueous suspension6.5 - 8.5 Packaging: Page valve bag, 25kg / bag
Titanium Dioxide Multipurpose rutile titanium dioxide pigment, it has average particle size distribution, good whiteness, good dispersion, high gloss, good hiding power and high weather resistance properties. It is widely used in coating, paints, ink, leather, rubber and ink production
Rutile & Anatase TIO2s usance areas are paints, varnishes as well as paper and plastics, printing inks, fibres, rubber, cosmetic products, the production of technical pure titanium, glass and glass ceramics, electrical ceramics, catalysts, electric conductors and chemical intermediates.
Titanium equipment Heat exchanger / condenser/ vessel U.S. Titanium is a professional manufacturer and supplier located in the united states, who can provide products such as titanium & titanium alloy, zirconium, tantalum, niobium, hafnium and other high performance metals. In addition u.S. Titanium has formed powerfully strategic partnership agreements with globally renowned titanium industry enterprises so that u.S. Titanium has incomparable advantages to provide the highest quality of titanium products, timely delivery, unlimited contract volume at a competitive price. Gr2, etc. Heat exchanger, the condenser etc.
