Standards ASTM / ASME B265 / SB265 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Finish Hot rolled (HR), Cold rolled (CR) Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Standard ASTM B348 / ASME SB348 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
- Material: ASTM B337, ASTM B338 Gr 1, Gr 2, Gr 3, Gr 7, Gr 9, Gr 12, Gr 16; - Technical: Seamless; - Process: Cold Rolled, Annealed or CWSR; - Grade: Gr.1 (CP titanium, low oxygen), Gr.2 (CP titanium, standard oxygen), Gr.7 ( Ti-Pa, standard oxygen), Gr.9 (Ti-3Al-2.5V), Gr.11 ( Ti-Pa, low oxygen), Gr.12 (Ti-Mo-Ni), Gr.16 (Ti-Pa,standard oxygen), Gr.17 (Ti-Pa,low oxygen) - Diameter: OD 6.0-273 mm, Wall thickness 0.3-22 mm, Length Within 18000 mm or Customized; - Application: Heat exchangers and condensers, Corrosive fluid transmission pipeline system, Titanium bicycle tube, automobile exhaust pipe,Offshore aquaculture; - Features: Light weight, excellent corrosion resistivity, strongly heat-resistance, high strength. - Inspection: Ultrasonic testing, Hydrostatic testing, Flattening testing, visual surface inspection, Dimensional inspection, tensile properties inspection and Chemical elements analysis.
We are involved in trading of titanium alloys and all type of titanium contain material like,Rulite, Ilemenite sand, Titanium slag etc
Titanium is a metal needed to make a variety of high-performance alloys. Most of the Titanium ore mined worldwide is used to manufacture titanium dioxide an important pigment, whiting, and polishing abrasive. We are instrumental in exporting and supplying of premium quality Titanium ore. It is basically a black heavy ore of iron and titanium. We can supply 3000-5000mt of Titanium ore per month to any destination.
Product Name: ASTM F136 Titanium Plate Brief product introdution:Medical titanium plate is a kind of plate that provides medical titanium raw materials for domestic and foreign orthopedic implant companies, such as bone plates, bone nail rods, intramedullary nails Pipes, Kirschner wire and prosthetic accessories and other materials. Executive standard: ASTM B265 ASTM F136 ASTM F67 Product material: GR1, GR2, GR5, GR7, GR9, GR12, GR16, Ti15333, etc. Product Specifications: T0.5-1.0mm x W1m x L2-4m T1.0-5.0mm x W1-1.5m x L2-3.5m T5.0-30mm x W1-2.5m x L3m T30-80mm x W1m x L2m Product surface: Black leather surface, bright surface, pickling surface Delivery status: Hot rolled, cold rolled, annealed Product use: Electroplating industry, glasses industry, titanium equipment industry, watches, accessories, electronics, chemical industry and other industries Product features: acid and alkali resistance, corrosion resistance, wear resistance, high temperature resistance, low temperature resistance, light weight and high strength, non-magnetic, non-toxic The characteristics of medical titanium plates produce medical titanium rods, plates, pipes, wires and other products, and provide medical titanium raw materials for domestic and foreign orthopaedic implant companies, namely bone plates, bone nail rods, intramedullary nails Pipes, Kirschner wire and prosthetic accessories and other materials. The products strictly follow the national standards for medical implanted devices. The characteristics of medical titanium plates are several hundred degrees higher than that of aluminum alloys. They can still maintain the required strength at moderate temperatures, and can work for a long time at a temperature of 450 to 500 �°C. These two types of titanium alloys are at 150 �°C to 500 �°C. There is still a high specific strength in the range of â??, while the specific strength of aluminum alloy decreases significantly at 150 â??. The working temperature of titanium alloy can reach 500 â??, and the working temperature of aluminum alloy is below 200 â??. Titanium alloy has good corrosion resistance The characteristics of medical titanium plate titanium alloy works in humid atmosphere and seawater medium, and its corrosion resistance is much better than that of stainless steel; its resistance to pitting corrosion, acid corrosion and stress corrosion is particularly strong; it is resistant to alkali, chloride, Chlorine organic substances, nitric acid, sulfuric acid, etc. It has excellent corrosion resistance. However, titanium has poor corrosion resistance to media with reducing oxygen and chromium salts.
OD: 5-600mm/0.2-24; Length:100mm-6000meter. Grade 1, 2, 5, 7 and 23 Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 50 Kg
Description 1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration. 2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal. 3. Good oxidation resistance, low tin slag and cost savings. 4. Solder joint is bright, full and uniform. 5. Economical and can produce the lowest consumption of the solid solder joints. Application Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.
Foil Thickness: 0.05-0.5 mm; Width:300-500 mm, Sheet Thickness: 0.6-30 mm; width:1500-2000 mm. Grade 1, 2, 4, 5, and 7. Submit LOI / RFQ along with KYC/CIS. one full service of the shipments, we are available provide FOB, CIF, DDU and DAP.
