High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Naphthalene superplasticizer Chemical name: �² Sodium naphthyl sulfonate formaldehyde condensate. Molecular formula: (c10h6ch2naso3) n, n is mainly 9-12. Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete. It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions. 1. early strength admixture - improve construction progress; 2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges; 3. pumping type admixture - transported by pump, such as high-rise buildings; 4. antifreeze admixture - used for winter construction. FDN-A High concentration product with sodium sulfate content no more than 5 percent. FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent. FDN-AII Low concentration product with sodium sulfate content no more than 18 percent. FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost. Usage method: --Powder 0.5%-1.0%, recommended dosage 0.75%; --Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete. --Each batch of goods must be tested to meet the engineering requirements before use. 1. As the requirement of engineer,the dosage can be adjusted after testing. 2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Naphthalene superplasticizer Chemical name: �² Sodium naphthyl sulfonate formaldehyde condensate. Molecular formula: (c10h6ch2naso3) n, n is mainly 9-12. Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete. It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions. 1. early strength admixture - improve construction progress; 2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges; 3. pumping type admixture - transported by pump, such as high-rise buildings; 4. antifreeze admixture - used for winter construction. FDN-A High concentration product with sodium sulfate content no more than 5 percent. FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent. FDN-AII Low concentration product with sodium sulfate content no more than 18 percent. FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost. Usage method: --Powder 0.5%-1.0%, recommended dosage 0.75%; --Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete. --Each batch of goods must be tested to meet the engineering requirements before use. 1. As the requirement of engineer,the dosage can be adjusted after testing. 2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
Aluminum Hydroxide is a white powder which can be used as flame retardant and filler.While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution, low impurity content, good stability, high whiteness, uniform particle size and good dispersibility. While it is used for composite materials,it has characteristic of micro powder,high white powder without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition temperature of aluminum hydroxide is about 205 �ºC. Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals.
Sodium gluconate ( C6H11NaO7 ) ,also known as sodium pentahydroxy organic acid, is a white crystalline granule or powder with a relative molecular mass of 218.14, a melting point of about 206 C, PH of 6.2 to 7.8, very soluble in water, slightly soluble in ethanol, insoluble in ether. Non-toxic, with good thermal stability, no deliquescence. As a retarder for cement: adding a certain amount of sodium gluconate to cement can increase the plasticity and strength of concrete, and its retardation will delay the initial and final solidification time of concrete. Delivery: 1.Qingdao Port is the best choice for us , but we can also choose Tianjin Port or other ports to meet customers' needs. 2.We have a professional logistics center to ensure the safety and convenience of cargo transportation. 3.A 20ft container can carry 24 to 26 tons without pallets. 4.The delivery date is generally 3~7 days after the payment.
Sodium gluconate ( C6H11NaO7 ) ,also known as sodium pentahydroxy organic acid, is a white crystalline granule or powder with a relative molecular mass of 218.14, a melting point of about 206 C, PH of 6.2 to 7.8, very soluble in water, slightly soluble in ethanol, insoluble in ether. Non-toxic, with good thermal stability, no deliquescence. As a retarder for cement: adding a certain amount of sodium gluconate to cement can increase the plasticity and strength of concrete, and its retardation will delay the initial and final solidification time of concrete. Delivery: 1.Qingdao Port is the best choice for us , but we can also choose Tianjin Port or other ports to meet customers' needs. 2.We have a professional logistics center to ensure the safety and convenience of cargo transportation. 3.A 20ft container can carry 24 to 26 tons without pallets. 4.The delivery date is generally 3~7 days after the payment.
Our company's main products: Polycarboxylate superplasticizer since 2003, Naphthalene superplasticizer since 1993, Sodium lignosulfonate and calcium lignosulfonate since 1993, Disperser/diffusion agent NNO, Sodium gluconate retarder.
PCE Polycarboxylate superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete. With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, PCE has many characteristic advantages in technology and performance as following: (1) low dosage, high rate of water reducing; (2) keep concrete good slumption retention; (3) good compatibility with cement; (4) small shrinkage of concrete to keep the stability of volume and durability; (5) environmental in production and usage. Base on above advantages.
500 dmtu Chromium oxide 48% available.
Aluminum Hydroxide is a white powder which can be used as flame retardant and filler. While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution, low impurity content, good stability, high whiteness, uniform particle size and good dispersibility. While it is used for composite materials,it has characteristic of micro powder,high white powder without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition temperature of aluminum hydroxide is about 205 �ºC. Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals.
Aluminum Hydroxide is a white powder which can be used as flame retardant and filler. While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution, low impurity content, good stability, high whiteness, uniform particle size and good dispersibility. While it is used for composite materials,it has characteristic of micro powder,high white powder without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition temperature of aluminum hydroxide is about 205 �ºC. Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals.
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Basic Information: It is a high range water reducer, high concentration naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate SNF, PNS and FDN etc. Na2SO4 has 3 grades:5% 10% 18% for exporting markets,in domestic we also have 3% 23% Na2SO4 content FDN.It contains no chloride, non-corrosive to steel bars, non-poisonous, odorless, and non-flammable. 1. Application Method and Notice 1,Blend dosage range is 0.5-1.2%. Appropriate blend dosage can be selected according to project object and the materials used during application. 2,FDN powder is recommended to be applied in solution. It can be used in dry form, but make sure mix it thoroughly with concrete. 3,If this product is applied with adoption of stagnant water blending method or post-blend approach, water reduction and dispersion will be better. 4,This product can be formulated with concrete additives of other varieties. It can be "double blended" with blending materials such as fly ash, ground slag, etc. But the blend dosage shall be calculated based on the total of cementing materials. 5,When this product is used for the first time or cement variety is changed, concrete trial preparation shall be conducted according to the adopted materials and construction requirements in the field. Construction mixing rate shall be adjusted based on testing result to serve as instruction for construction blending. 1.Suitable for long-distance construction projects type pumping concrete. 2.Suitable for compounding normal concrete,high-performance concrete,high-strength concrete and ultra-high strength concrete. 3.Suitable for impervious,antifreezed and high durability concrete. 4.Suitable for high-performance and high flowing concrete,self-leveling concrete,fair-faced concrete and SCC(self compact concrete). 5.Suitable for high dosage of mineral powder type concrete. 6.Suitable for mass concrete that used in expressway, railway, bridge, tunnel, water conservancy projects, ports, wharf, underground etc.
PR11 TEA, a Triethanolamine (TEA) Activator, is a catalyst to be used with PR10 ACLM acrylamide products as an activator for reaction. TDS SDS PR11 TEA Canadian French SDS PR11 TEA Canadian English SDS PR11 TEA US English SDS PR12 APSF is a catalyst to be used with PR10 ACLM acrylamide. It is a white crystalline solid and used as a polymerization initiator. Ammonium persulfate is a powder that is a required grout component. PR12 APSF decomposes over time as it is a strong oxidizing material TDS SDS PR12 APSF Canadian French SDS PR12 APSF Canadian English SDS PR12 APSF US English SDS PR13 SPSF (Sodium Persulfate) is a catalyst to be used with PR10 ACLM acrylamide. It is a white crystalline solid and used as a polymerization initiator. Sodium persulfate is a powder that is a required grout component and can be increased from 5 lbs. (1% by total mix weight of 500 lbs., 60 oz. by volume to a maximum of 15 lbs. (3% by total mix weight of 500 lbs., 180 oz. by volume). PR13 SPSF decomposes over time as it is a strong oxidizing material. TDS SDS PR13 SPSF Canadian French SDS PR13 SPSF Canadian English SDS PR13 SPSF US English SDS PR17 LYTX is a water-based additive to strengthen gel and reduce shrinkage. With acrylamide, replace up to 2 gallons mix water with PR17 LYTX in each tank. Seals leaks in sanitary and storm water mainlines, pipe penetrations, laterals, lift stations and manholes. TDS SDS PR17 LYTX Canadian French SDS PR17 LYTX Canadian English SDS PR17 LYTX US English SDS
ECOPOL-2000 Ultra Clean, High Performance Guar DESCRIPTION Ecopol-2000 is an ultra clean, fast-hydrating natural guar gum for fracturing fluid applications. Ecopol-2000 has excellent hydration properties that enable for both batch mixing and on-the-fly addition. The high quality and high purity of this product means that both lower polymer loadings can be achieved and fewer impurities are deposited down-hole, both resulting in cleaner, higher permeability wells.
Industrial consumables (chemical intermediates such as anhydrides (maleic, phthalic, and trimellitic) and their derivatives (e.g., plasticizers), dibasic acids (fumaric and malic), unsaturated polyester resins, compounds and composites and special esters.), agricultural inputs, home appliances, bakery consumables, electronics, and minerals..
Dicalcium phosphate, dates, plastic products.
Barium sulfate (baso4) , agriculture products like mango.Exporter
Hydrochloric acid, potassium sulphate.
Polymers, chemicals, flexible packaging PP, LDPE, PC, ABS.
Chemicals, Hdpe Pet Bottles.
Electrical, hardware, chemical.
