The CORI is the product for the direct reduction unit:
First, it will be stored in product passivation silos, its transportation by conveyors. After that, it will be stored in the warehouse for further use.
Production rate fo312 T/H. Assuming 8,000 hours of annual
operation, this equates to in annual production of 2,500,000 tonnes.
-IRON: (Rod a Benton):Hot-rolled product in multipurpose steel for high-adherence construction, weldable in RB 500 grade. NA 8634(2015) and ISO 6935-2 (2015). Diameter:
A wide range of diameters: 8,10,12, 14, 16,20,25,32,40 mm.
Length :12m (-0mm +100mm) with the possibility of making specific lengths of less than 12m according to customer demand for diameters ranging from 8mm to 16mm.
12m to 18m for diameters ranging from 16mm to 40mm.
Marking :
A specific AQS marking is engraved on the rebar bars for the diameters: 8,10,12,14,16mm And the identifying code AQS-diameter-RB500 for the diameters: 16,20,25,32,40mm
- Portland Cement 42.5 (Bags, Bulk)
-Wire rod: of round section with a diameter varying between 5.5 mm to 14 mm, of high quality.
The round and smooth wire rod is obtained by hot rolling in accordance with the Algerian standard an 8634 and according to international standards.-The Fields Of Use Of Wire Rod Are As Follows:- Drawn Wire-Welded Mesh-Nail, Tie Wire, Galvanized Wire- Gabions- Barbed Wire-Spring Wire- Bolt-Nut-Screw- Paperclips-Pickup Wire-Welding Wire
-BILLET: A billet is a section of metal used to roll into bars and shapes. It can be produced with ingots or directly by continuous casting. Billets are used as raw materials or for extrusion, forging, rolling and other metal processing operations.
The adjustable louver allows you to control the amount of air entering the building by allowing you to adjust the angle of its fins.
Made of galvanized sheet, galvalume, pintro, kynar, or stainless steel with galvanized hardware. Additionally, it can be manufactured with mosquito net or aviary for added protection, as well as allowing the placement of lters to control the entry of dust.
DESIGN
Custom made according to the project.
Thickness of 4 or 6.
Perimeter moldings designed according to the type of wall.
Made of galvanized sheet, galvalume pintro, kynar cal. 22.
Optionally it can be manufactured in natural aluminum
or stainless steel cal. 18.
Quick and easy installation on site.
Light and durable.
The snow removing equipment is the necessary equipment of snow cleaning for farm,orchard, schools, parks, squares, residential areas, garden, lanes sideways, bridges and other key securing sites and widely used in snow winter. This equipment could improve the efficiency of snow removal, reduce labor intensity, and ensure pepole going out more safety and convenient.
1).The road sweeper can be matched to tractor,wheel loader,forklift,
2).powered by hydraulic output of these machinery,only tractor could be driven by PTO.
3).PP with steel wires brushes.
4).Working width from 1200 to 2500mm
5).Suitable for cleaning road,street,floor and other flat.
*The engine adopts famous brand engine, 100% inspection before delivery.
*The Snow Cleaning Machine adopts full metal jacket design,after oxidation spray,anti-corrosion rust proof,long service life.
*Double LED lamp of operation panel, greatly improving the workers efficiency and safety at night and early morning.
*The Snow Cleaning Machine uses monolithic auger design, low cost of vulnerability consumption and easy replacement.
*The Snow Cleaning Machine has the advantages of fashion appearance,mult functions, light and flexibility,simple operation.
Product Introduction:
Energy is an important material basis for human survival and development, since entering the 21st century, energy conservation and emission reduction has become the common goal of the development of countries around the world, insulation materials have been a large number of development and application. 1050 degree high temperature resistant calcium silicate board with low thermal conductivity, light weight, high strength, high temperature resistance and other excellent properties, become one of the most promising thermal insulation materials. Calcium silicate board is mainly made of silicon powder, calcium powder, natural wood pulp by high temperature and high pressure steam curing made of low, medium and high density new environmental protection insulation material.
Product features:
Calcium silicate board has good fire resistance, high temperature resistance, waterproof, light weight, easy to cut and other properties. Applicable to steel, petrochemical, ceramics, glass, cement, external wall insulation and all kinds of furnace insulation, as well as electric power, machinery, electronics, shipbuilding and other industries of insulation. Calcium silicate is a common substitute for asbestos and is a safe insulating material. Calcium silicate is one of the most widely used fire-resistant materials in Europe. Europeans are more inclined to use calcium silicate as cladding. When smelting metal ores, silica reacts with calcium carbonate to form this substance, forming slag.
Product use:
Metallurgical industry: heating furnace, holding furnace, annealing furnace, high temperature flue, hot air pipeline.
The 1000â?? high temperature calcium silicate insulation board is composed of hard calcium silicate carbohydrate and reinforced fiber, does not contain asbestos, the highest heat resistance temperature of 1050, is an efficient energy-saving product. With high heat resistance temperature, strong heat insulation performance, low volume weight, high strength, good durability, corrosion resistance, cutting, sawing and other excellent construction characteristics, can be widely used in kiln energy saving and heat preservation projects. Applicable to steel, petrochemical, ceramics, glass, cement, external wall insulation and all kinds of furnace insulation, and electric power, machinery, electronics, shipbuilding and other industries of thermal insulation. Calcium silicate is a common alternative to asbestos as a safe insulation material. Calcium silicate is one of the most widely used materials for fire prevention in Europe. Europeans are more inclined to use calcium silicate as cladding. In smelting metal ores, silica reacts with calcium carbonate to form this substance to form slag.
1050 degree high temperature resistant calcium silicate board has:
1. Good durability, can withstand the continuous heat load within the high temperature limit.
2. Low thermal conductivity and high adiabatic performance throughout the use range.
3. Light weight, high specific strength.
4. Good durability, long-term use without powder phenomenon.
5. Strong construction applicability, with ordinary woodworking tools can be cut products at will.
6. Safe and hygienic use. Free of asbestos, sulfur, chlorine and other toxic substances.
7. Not afraid of wet water, product performance unchanged after drying.
8. Protect high temperature equipment and extend the service life of equipment
Calcium silicate board main material of the products are SiO 43%, CaO 44% and reinforcing fiber. The products are made by stirring, heating, gelling, forming, pipe hardening and drying. With light bulk weight, Low thermal conductivity and high bending and compressive strength character, using in construction.Petroleum, electric power and Building partition wall, curtain wall, roof and building envelope thermal insulation.
