Titanium
Brazilian Pellet Feed / High Grade Of Titanium BRAZILIAN IRON ORE PELLET FEED Loading Port : Salvador Bahia ( East region of Brazil ) Availability : Approximately two (2) million tons of Iron Ore Pellet Feed (hematite) according the below specifications. The quantity is available for immediate shipping . Element Guaranteed Typical Fe 58.00% minimum 58.80% Fe2O3 77.00% minimum 80.90% FeO 3.60% maximum 2.60% V2O5 0.55% maximum 0.43% SiO2 4.00% maximum 3.30% Al2O3 2.00% maximum 1.85% TiO2 7.50% maximum 6.60% CaO 0.70% maximum 0.55% Na2O 2.00% maximum 1.45% K2O 0.05% maximum 0.01% MgO 2.00% maximum 1.50% Mn 0.20% maximum 0.16% Cr2O3 0.05% maximum 0.02% S 0.05% maximum 0.02% Si 1.87% maximum 1.54% Al 1.06% maximum 0.98% P 0.01% maximum 0.01% LOI 0.30% maximum 0.25% Moisture (H20) 10.00% maximum 8.00% Size < 0.15mm70% 100%
I am representing a company that has 20,000 tons of Titanium mined and out of the ground in Mexico. The company had mined this for a Chinese company which did not honor its contract. The company is willing to sell this product at a discount. There is additional product in the ground waiting to be extracted. The next step needs to be a call between the buyer and seller
U.S. Titanium machining part According to drawing or sample Gr2, gr5(ti-6al-4v), gr7, gr12 etc. According to drawing
U.S. Titanium casting Gr2, gr5(ti-6al-4v) etc. Astm b367 , bms 7-310, bms 7-310, asme sb367, etc. Technique: Lost-wax investment casting, lost-foam investment casting, which are capable of complicated shapes and small features, high precision and good surfaces. Equipment: wax injection machines, desiccant rooms, dewax machines, vacuum mel towers, sinter kiln and ultrasonic inspection machines etc. Size : as per clients, drawings and requirements , from 5g to 30kg. Process: wax injecting, slurrying , dewaxing , sintering, casting and furbishing.
Content - Ti - 32.4 to 50% FE- 33.9% AI- 1.5% Si- 4.4%
Titanium ore (73% titanium,20.41% iron metal)
100 tons of Titanium ore 73% titanium and 20.41 iron metal
Foil Thickness: 0.05-0.5 mm; Width:300-500 mm, Sheet Thickness: 0.6-30 mm; width:1500-2000 mm. Grade 1, 2, 4, 5, and 7. Submit LOI / RFQ along with KYC/CIS. one full service of the shipments, we are available provide FOB, CIF, DDU and DAP.
OD: 5-600mm/0.2-24; Length:100mm-6000meter. Grade 1, 2, 5, 7 and 23 Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 50 Kg
SML tube OD:3-114mm / 0.12-4.5; Wall thickness:0.2-9mm; Welded tube: OD:4-914mm/0.16-36; Wall thickness:0.4-30mm; Length: 100-6000mm Grade: GR1,GR2,GR7,GR9,GR5,GR12. Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 50 Kg
OD:0.5-4.9mm/0.02-0.2; Length:500-1500 mm Grade: ERTi-2,ERTi-5,ERTi-7,ERTi-9 Surface:Pickling,Polished Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 5 - 10 Kg
OD:20-114mm/0.78-4.5 Wall thickness:1.65-4mm; Length:500-3000mm. Grade:Gr1,GR2,GR5,GR9,GR7,GR12 Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 100 Kg
Titanium exhaust tubing is characterized by its lightweight, high strength, corrosion resistance and heat resistance. The density of titanium alloy is only 60% of steel, but the strength is even better. At the same strength, the titanium exhaust tubing is lighter than stainless steel, suitable for race cars and motorcycles owners who pursue the ultimate lightweight modification. Titanium Seamless Tube is a long strip of tubing made of titanium alloy with a hollow section and no seams around it. It was originally used primarily for the manufacture of aircraft engine compressor components and structural components for rockets, missiles and high-speed aircraft. Since the mid-1960s, it has been gradually applied to electrodes in the electrolysis industry, condensers in power stations, heaters for oil refining and seawater desalination, and environmental pollution control devices. The titanium welding pipe is obtained by welding a titanium or titanium alloy coiled strip or a wide-width sheet into a tubular shape by crimping. It has been widely used in electric power, seawater desalination, water treatment equipment, air conditioning equipment and other industries, but in the petrochemical industry, the use of titanium welded pipes is still being promoted.
Titanium Bar GR7 has excellent strength, hardness, lightweight, high-temperature resistance, low-temperature resistance, good mechanical processing performance, excellent corrosion resistance, non-magnetic and non-toxic, and good heat transfer performance. At the same time, it has memory and superconductivity. The composition of Titanium Bar GR5 is Ti-6Al-4V, which belongs to (α+β) type titanium alloy, with good comprehensive mechanical and mechanical properties. It has excellent corrosion resistance, small density, high specific strength, good toughness and weldability, and has been successfully applied in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors. The titanium round bar is mainly used in aerospace structures, engine parts, ships, medical implants and equipment, hydraulic and instrumentation pipes, cryogenic vessels, heat exchangers that require high strength. It is also used in a variety of chemical process equipment and ship and fuselage applications where corrosion resistance is required. Titanium Filler Rod is a hollow filter tube made of titanium powder by high temperature sintering. It is mainly used for titanium rod filters. It is non-toxic, non-magnetic, non-shedding, and has good bio-melting properties. Therefore, it is widely used in liquid-solid separation in food, beverage, pharmaceutical, chemical and other industries. It is especially suitable for decarbonization filtration in large infusion and injection production lines in the pharmaceutical industry. https://www.yunchtitanium.com/titanium-bar-1
There is a layer of oxidized film on the surface of titanium plate GR7, which is equivalent to a good long-term wear-resistant hair separating agent. The use of titanium plate saves the separating agent, makes the plate peeling easily, and eliminates the pre-treatment process. The plate is half lighter than the copper board. The service life of titanium plate is more than 3 times that of copper plate, which can reach 10 to 20 years according to operating conditions. The titanium plate GR7 can increase production capacity and reduce the production cost of electrolytic copper, so that it has better economic benefits. Grade 5 titanium alloy also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4titanium alloy, is the most commonly used alloy. It has excellent specific strength, excellent corrosion resistance and fracture toughness, as well as good weldability and ability to withstand extreme temperatures, and can be strengthened by heat treatment. The alloy was originally developed for the aerospace market and is widely used in aerospace structural components. Because of its very good biocompatibility, it is also widely recognized in the medical industry. Typical applications include aero-engine components, fuselage components, marine equipment, offshore oil and gas equipment, power generation, chemical industry, automotive moving parts, medical equipment, surgical implants, sports equipment. Titanium Sheet Grade 5 has excellent corrosion resistance, small density, high specific strength and good toughness and weldability. It has been successfully applied in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors. We also have ti6al4v eli and ti6al4v. https://www.yunchtitanium.com/titanium-sheet-1
Titanium is a very good metal material with high strength, low density, high hardness, high melting point and corrosion resistance. High purity titanium has good plasticity and is an ideal metal 3D printing material. 3d titanium wire is widely used in aerospace, aviation, military, light industry, chemical, 3D printing, welding, textile, electronics, superconducting, medical and petrochemical industries. As a kind of lightweight and corrosion-resistant structural material, titanium and titanium alloy have low density, high specific strength, good corrosion resistance, non-toxic and non-magnetic, low thermal conductivity, weldability and good biocompatibility. It has broad application prospects in aerospace, marine engineering, chemical, electric power, construction, automotive, medical, sporting goods and other fields. Titanium 6Al4V wire can be used in industrial welding wire, medical, sports goods, glasses, earrings, headwear, plating hangers, 3D printing, etc. Nickel Titanium Wire is used in super elastic memory alloy mobile phone antennas, fishing hooks, fishing rods, children's toy antennas, optical frames, Bluetooth headsets, ear hooks, medical equipment, etc.. With the development of the times, it began to be gradually used in women's clothing ring. We also have titanium tubing price. https://www.yunchtitanium.com/titanium-wire--1
U.S. Titanium is a professional manufacturer and supplier located in the united states, who can provide products such as titanium & titanium alloy, zirconium, tantalum, niobium, hafnium and other high performance metals. In addition u.S. Titanium has formed powerfully strategic partnership agreements with globally renowned titanium industry enterprises so that u.S. Titanium has incomparable advantages to provide the highest quality of titanium products, timely delivery, unlimited contract volume at a competitive price. Gr1, gr2, etc. According to drawing and requirements of customer
Titanium plate/sheet Grade: gr1, gr2, gr5, gr7, gr9gr12, gr16, gr17, ti-8-1-1, ti-15333 etc. Size: thk - 0.02” to 5.906”; width max - 98.4”; lmax - 472.441” Standard: astm b265, asme sb265, ams 4911, ams 4916 etc. Titanium clad steel plate / sheet / tube sheet Titanium grade: gr1, gr2, gr3(cp ti), gr7, gr16(ti/pd alloy), gr12(ti-0.3 mo-0.8 ni) Steel material: a516 gr-70, sa266, sa105, f53, Titanium clad steel plate size: (0.039"-0.394"+0.197"-4.73") thk × (=78.74") width × (=236.22")length Standard: astm b-898; Application: petrochemical, chemical, chloral-alkali, food, fertilizer, wet metallurgy, electroplating, vacuum salting making.
Titanium bar/rod Grade: gr1, gr2, gr5, gr7, gr9, gr12, gr16, gr17 etc. Size: dia - 0.315” to 7.87”; Standard: astmb348, ams4928, astm f67, astm f136, h7 tolerance is available. Titanium wire / welded wire: Grade: gr1, gr2, gr5(ti-6al-4v), gr7, gr12, Wire size: dia (0.0012”-0.236”) × straight length/ spool/ coil; Grade: erti1, erti2, erti3, erti4, erti5, erti7, erti9, erti12, erti23, Welded wire size: dia (0.002”-0.4”)× straight length/ spool/ coil Standard: astm b863, aws a5.16; According to the different production process, the titanium wire can be divided into the hot drawing titanium wire and the cold titanium wire. The titanium welding wires we supply can only be round cross section and drawn from titanium wire rods, they are made as filler metal for welding applications by arc, mig, tig procedures.
