Nickel Rods Suppliers and Manufacturers

Inconel 718 alloy is a precipitation-hardening nickel-chromium-iron alloy containing niobium and molybdenum. It has high strength at 700 C, good toughness and corrosion resistance in high and low temperature environments. The delivery condition can be solution treated or precipitation hardened. No matter in high temperature or low temperature environment, Inconel718 alloy has excellent resistance to stress corrosion cracking and pitting corrosion. Inconel718 alloy is especially excellent in oxidation resistance at high temperature. Inconel 718 is a high-temperature alloy with excellent corrosion resistance and high-temperature strength, commonly used in aerospace, energy, chemical, and marine engineering fields. The following are the common national standard designations for Inconel 718: US standard designation: UNS N07718, AMS 5662, AMS 5663, AMS 5664, AMS 5832, AMS 5962, AMS 5596, ASTM B637, ASTM B670, ASTM B906, ASTM B983, ASTM B655, ASTM B751, ASME SB637, ASME SB670, GE B50TF15, GE B50TF14, GE B50TF14E, GE B50A714, SEW 555. European standard designation: EN 2.4668, EN 10216-5, EN 10250-4, EN 10263-4, EN 10269, EN 10302, EN 10305-1, EN 10308, EN 10312, EN 10314, EN 12266-1, EN 13480-5, EN 13544-2, EN 14456. German standard designation: DIN NiCr19NbMo, DIN 2.4668, DIN 17742, DIN 17754. French standard designation: AFNOR NC19FeNb, AFNOR NC 19 Fe Nb. British standard designation: BS HR 51, BS HR 52, BS HR 601, BS HR 602, BS HR 605, BS HR 506. Russian standard designation: �?�?�¡�¢ �­�?678, �?�?�¡�¢ 5632-72, �?�?�¡�¢ 9940-81, �?�?�¡�¢ 14955-77, �?�?�¡�¢ 22897-86. Note: Standard designations may vary depending on the different standard organizations or countries. We can provide the following the form:Inconel718 alloy coil; Inconel718 alloy strip;Inconel718 alloy plate; Inconel718 alloy sheets; Inconel718 alloy tube; Inconel718 alloy pipe; Inconel718 alloy flat; Inconel718 alloy bar BS:HR 51;DIN:NiCr19NbMo;UNS:N07718;W.Nr:2.4668 1. Steam turbine 2. Liquid fuel rockets 3. Low temperature engineering 4. Acid environment 5. Nuclear engineering.

Monel 400 (UNS N04400, NCu30) The structure of Monel 400 alloy is a high-strength single-phase solid solution. It is a corrosion-resistant alloy with the largest amount, the widest application and excellent comprehensive performance. This alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium, and also has excellent corrosion resistance to hot concentrated lye. At the same time, it is also resistant to corrosion by neutral solutions, water, sea water, atmosphere, organic compounds, etc. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance. The alloy has excellent corrosion resistance in fluorine gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives. At the same time, it is more corrosion resistant than copper-based alloys in seawater. â?² Acid medium: M400 is corrosion-resistant in sulfuric acid with a concentration of less than 85%. M400 is one of the very few important materials in durable hydrofluoric acid. â?² Water corrosion: M400 alloy not only has excellent corrosion resistance under most water corrosion conditions, but also pitting corrosion and stress corrosion are rarely found, and the corrosion rate is less than 0.25mm/a. â?² High temperature corrosion: The maximum temperature of M400 continuous work in the air is generally around 600�°C, and in high temperature steam, the corrosion rate is less than 0.026mm/a. â?² Ammonia: Due to the high nickel content of Monel 400 alloy, it can resist corrosion under anhydrous ammonia and ammoniation conditions below 585�°C. American standard designation: UNS N04400, Specifications: ASTM B164, ASTM B127, ASTM B165, ASTM B725, ASTM B163, ASTM B366, ASTM B164, ASTM B564, ASTM B164, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544. German standard designation: W.Nr. 2.4360, Specifications: DIN 17743, DIN 17750, DIN 17752, DIN 17753, DIN 17754. Japanese standard designation: JIS NW4400, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907. Chinese standard designation: NS111, Specifications: GB/T 2054, GB/T 2055, GB/T 2056, GB/T 2057, GB/T 2058, GB/T 2059, GB/T 2060, GB/T 2061. We can provide the following the form:Monel alloy 400 coil; Monel alloy 400 strip;Monel alloy 400 plate; Monel alloy 400 sheets; Monel alloy 400 tube; Monel alloy 400 pipe; Monel alloy 400 flat; Monel alloy 400 bar GB: NS111 ;JIS:NW4400;UNS:N04400;W.Nr:2.436 This alloy is mainly used for 1. Seamless water pipes and steam pipes in power plants 2. Sea water exchanger and evaporator 3. Sulfuric acid and hydrochloric acid environment 4. Crude oil distillation 5. The pump shaft and propeller of the equipment used in seawater 6. The nuclear industry is used to manufacture equipment for uranium refining and isotope separation 7. Manufacture of pumps and valves used in the production of hydro

We put forward a high quality of assortment of Nickel which is available in many forms including LME registered and non registered cathodes, cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder, flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods. Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile, somewhat ferromagnetic, and a fair conductor of heat and electricity

Product:Rods Brand:Renaissance Pipe Fitting Inc. Sizes:Refer the specification Condition:New Rating:4.2, based on 42 reviews price:Start from 20 USD SS Rods, ASTM B221, UNS N06600, UNS N02200, UNS N06601, UNS N08800 High Nickel Alloy Rods, supplier. RFP India is India's well-known manufacturer, supplier and exporter of Rods, which is an iron alloy with a very low carbon (less than 0.08%) content in contrast to cast iron (2.1% to 4%), and has fibrous inclusions known as slag up to 2% by weight. Many items, before they came to be made of mild steel, were produced from rods, including rivets, nails, wire, chains, rails, railway couplings, water and steam pipes, nuts, bolts, horseshoes, handrails, wagon tires, straps for timber roof trusses, and ornamental ironwork. Rods might be round, square, rectangle or flat, and flat rods might be narrow or broad. Rod iron is usually a cut from flat bar iron in a slitting mill to provide the raw material for nails.

mporter & Supplier of Nickel Sludge. Our product range also comprises of Copper Ore, Tin Ore, TIn Sludge, Cobalt etc. The raw materials are available in powder form, to the exact chemical and physical (Mesh Size) specifications of the welding electrodes industry. Nickel Sludge Product Code : Nickel Nickel Percentage : 15% to 20% Payment Terms : T/T (Bank Transfer), Western Union, Other Minimum Order Quantity : 25 Metric Ton Production Capacity : 100mt Delivery Time : immidiate Packaging Details : as per costumer requirement

Ferro nickel 19% supply

Below is a comprehensive list of our alloys arranged by type. More detailed information can be found on each alloys specific page. All of our products are purchased to normal industry standards and come with material test reports (MTR) also known as material certifications.

Nickel is a hard, ductile and ferromagnetic metal that is highly polished and resistant to corrosion. Nickel is a ferrophilic element. The core is mainly composed of iron and nickel elements. In the crust, iron-mafic rocks contain more nickel than silico-alumina rocks. For example, peridotite contains 1,000 times more nickel than granite, and gabbro contains 80 times more nickel than granite. On October 27, 2017, the World Health Organization's International Agency for Research on Cancer released the preliminary list of carcinogens for reference. Nickel compounds are in the list of carcinogens, metal cobalt, metal nickel and 66-67% nickel, 13-16% nickel. Chromium and 7% iron alloy powders for implantation of foreign bodies in vivo, nickel metal and nickel alloys are on the list of Class 2B carcinogens. Niclkel powder is mainly used in atomic energy industry, conductive materials, battery electrode materials, chemical catalysts, hard surface spray welding, special welding rods, porous filter materials, magnetic materials, contact materials, Diamond tools, automobile manufacturing, cemented carbide, high-temperature high-strength alloys and other powder metallurgy fields.

Size : 5,5 mm-25 mm production range Weight min. 2050 max 2400 kg Outside diameter 1250 mm Internal diameter 850 mm Height 1700-2200 mm

We deals in the following products of India, China, Taiwan and Korea Origin:- Steel Tie Rod

We deals in the following products of India, China, Taiwan and Korea Origin:- Aluminium Wire Rod Aluminium Billets

Hindalco's copper division, Birla Copper, operates one of the largest single-location custom copper smelters in the world. The custom copper smelter at Dahej in the state of Gujarat (west coast of India) houses three copper smelters, three refineries, two rod plants, a captive power plant, a captive oxygen plant, phosphoric acid plant, di-ammonium phosphate plant, precious metal recovery plant, captive jetty and other utilities. Hindalco produces LME grade copper cathodes, continuous cast copper rods in various sizes, and precious metals like gold and silver. Hindalco is one of the major manufacturers of 19.6mm diameter copper rods, which is used for railway electrification. The co-product, sulphuric acid, is partly utilised to produce phosphoric acid and fertilisers like di-ammonium phosphate (DAP). Birla Copper's brands, Birla Copper and Birla Copper II, are recognized for their high purity and consistent quality in the domestic as well as global markets. Birla Copper is an ISO 9001, 14001, 27001, 50001 and OHSAS 18001 certified company, registered on the London Metal Exchange as Grade-A copper brand, and certified as a Star Trading House having labs for chemical, mechanical and electrical testing accredited by the National Accreditation Board for Laboratories (NABL).