USA Non Woven Face Mask Suppliers and Manufacturers

General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CE certified Fully certified Chinese standard (GB/T 32610-2016) BFE 90% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of large liquid droplets Comfort Features Higher breathability due to the lightweight material The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) With the standard BFE being met, our masks effectively resist bacterial penetration with a rating of at least 95%. You can go about your day, knowing you are practically perfectly protected from the air pollutants around you. 100% compliant with regulations (CE, GB/T 32610-2016) Our daily protective masks are 100% CE certified. They are also in accordance with the Chinese standard GB/T 32610-2016. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! High breathability The soft lightweight material of the masks makes them perfect for everyday use. The breathing resistance is low, and the light and soft material of the inner layer was specifically designed to make your mask-wearing more comfortable. Disposable In order for masks to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the WHO guidelines for correctly putting the mask on and off.

General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CE certified In accordance with the European standard EN14683:2005 BFE 98% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of large liquid droplets Non-splash resistant Comfort Features Breathing resistance & 29.4 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply surgical face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type II medical masks effectively resist bacterial penetration with a rating of at least 98% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 98 �¢?? 99.9% protected from inhaling airborne pollutants. 100% compliant with regulations (CE, EN14683:2005) Our surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! High breathability The combination of a soft lightweight material and comparatively low breathing resistance allows for greater breathability. This also means the fabric is more absorbent, which serves to lessen the moisture build-up. Disposable In order for your Type II mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.

General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CE certified in accordance with the European standard EN14683:2005 BFE 95% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of large liquid droplets Non-splash resistant Comfort Features Breathing resistance < 29.4 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type I medical masks effectively resist bacterial penetration with a rating of at least 95% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 95 â?? 99.9% protected from inhaling airborne pollutants. 100% compliant with regulations (CE, EN14683:2005) Our surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! High breathability The combination of a soft lightweight material and comparatively low breathing resistance allows for greater breathability. This also means the fabric is more absorbent, which serves to lessen the moisture build-up. Disposable In order for your Type I mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.

Disposable Gloves/Masks

General Features Size Universal Colour White Packaging 20 masks per box Fluid resistant Optional design Cupped or folded Safety Features CEcertified FDAcleared In accordance with the Chinese standard GB26262006 Filtration efficacy of PM25 99 Filtration efficacy of PM03 95 Disposable Inward leakage lt8 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic ear loops for a more secure maskadjustment High fit effectiveness Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants  It is extremely effective 9599 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA GB26262006 Our KN95 respirators have been confirmed to meet all of the performance requirements set by the Chinese standard GB26262006 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your KN95 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Fluid Resistant Our filtering face piece respirators are FDAcleared as being adequately fluid resistant Therefore they are recommended for use during surgical procedures or circumstances where one could come in contact with infectious splatters of bodily fluids User Seal Check Before entering a possibly contaminated area you need to properly put on your filtering face piece To do this you need to Take the mask by its ear loops one in each hand with the nose clip up Position the respirator under your chin Place each ear loop behind its respective ear Adjust the mask carefully against your face not allowing for any gaps between the mask and your face Adjust the nose clip with both hands to ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect its position and then quickly exhale Depending on where you fill the air passing adjust the nose clip or the entire mask accordingly following the aforementioned steps If there are no gaps for the air to pass through you have correctly put on the mask

General Features Size Universal Colour White Packaging 20 masks per box Optional design Cupped or folded Safety Features CEcertified FDAcleared In accordance with the US standard NIOSH42CFR84 Filtration efficacy of PM25 99 Filtration efficacy of PM03 95 Disposable Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic ear loops for a more secure maskadjustment High fit effectiveness Fits more tightly against the face cupped respirators Conveniently portable folded respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants  It is extremely effective 9599 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA NIOSH42C FR84 Our N95 respirators have been confirmed to meet all of the performance requirements set by the US standard NIOSH42C FR84 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your N95 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Cupped Design Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket If youre looking for a more portable alternative check out our folded mask design Remember if your mask gets damaged its best to just throw it away User Seal Check Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The bottom strap should go below your ears over your neck The top strap should go high on your head above the ears Adjust the mask carefully against your face not allowing for any gaps between the mask and your face Adjust the nose clip with both hands to ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect it

General Features Size Universal Colour White Packaging 20 masks per box Optional design Cupped or folded Optional feature Valved or nonvalved Safety Features CEcertified FDAcleared In accordance with the European standard EN 1492001A12009 Filtration efficacy of PM25 99 Filtration efficacy of PM03 99 Disposable Inward leakage lt2 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic headbands for a more secure maskadjustment High fit effectiveness Less moisture and heat buildup valved respirators More lightweight and easier to carry nonvalved respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against variousnonoily airborne contaminants  It is extremely effective 99 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA EN 1492001A12009 Our FFP3 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your FFP3 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Decide for yourself Vannin Healthcare Global is one of the rare suppliers who let you choose your FFP3 masks design at no additional cost If youre indifferent about the design of your respirator or just want to surprise your future self feel free to skip this step Choose the design Cupped or Folded Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket Remember if your mask gets damaged its best to just throw it away Folded masks on the other hand you can easily carry around in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask I want the folded FFP3 respirator mask The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masksfor safety reasons Th

General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CE certified In accordance with the European standard EN14683:2005 BFE 98% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of even smaller liquid droplets Splash-resistant ( 120 mmHg) Comfort Features Breathing resistance 49 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply Type II R face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants and penetration of bodily fluids. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type II R medical masks effectively resist bacterial penetration with a rating of at least 98% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 98- 99.9% protected from inhaling airborne pollutants or hazardous splatter. 100% compliant with regulations (CE, EN14683:2005) Our 3-ply surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! Splash resistance The unique feature of Type II R surgical masks is the liquid-repellent layer offering additional protection against particulate matter and infectious splashes. The greater protective efficiency of the masks adequately makes up for the higher breathing resistance (49 Pa/cm2). Disposable In order for your Type II R mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.

General Features Size Universal Colour White Packaging 20 masks per box Safety Features CEcertified FDAcleared In accordance with the European standard EN 1492001A12009 Filtration efficacy of PM25 99 Filtration efficacy of PM03 94 Disposable Inward leakage lt8 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic headbands for a more secure maskadjustment High fit effectiveness Less moisture and heat buildup valved respirators More lightweight and easier to carry nonvalved respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants  They are extremely effective 9499 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA EN 1492001A12009 Our FFP2 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your FFP2 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Folded Design You can easily carry around our folded masks in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask If youre looking for a design that is less likely to have leakage check out our cupped design masks Valved The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masks for safety reasons The wearing of your respiratory protective mask becomes more comfortable as there is less moisture buildup  However if you suspect you have been infected wearing an unvalved respirator is advised Otherwise you risk exposing other people to virus particles nbsp Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The botto