Place of Origin: Guangdong, China (Mainland) Brand Name: laimeisi Model Number: LMS Type: Insulation Sheet, thermal pad Material: silicone, thermal conductive insulation pad Application: High Voltage, CPU GPU Rated Voltage: 4kv Tensile Strength: 10.4Mpa Color: Blue Thickness: 0.1mm-10mm Feature: Excellent Resistance Item name: Silicone rubber thermal conductive insulation pad Certificate: ROHS Hardness: 20-50 Shores Size: Customizable
Product specifications : silicon rubber band Rubber band, 1x1mm, dia 4.5cm, 100g, cmc-red Rubber band, 1x1mm, dia 7cm, 400g, cmc-red Rubber band, 1x3mm, dia12cm, 100g, cmc-amber Rubber band, 1x8mm, dia12cm, 100g, cmc-amber Quantity required : initially 10000 pieces Shipping term : fob
Addition cure silicon rubber for artificial stone products pplications: It mainly use for making molds for resin, stone, gypsum and cement product with medium size. Addition cure silicon rubber for artificial stone products Typical Datasheet : Item No Color Hardness (A°) Viscosity (CS) Tensile-strength( kgf /cm2 ) Tear-strength (kgf /cm2) Elongation-break(%) Mixing Ratio of silicone and catalyst Application(most for resin, stone, gypsum and cement product to make moulds) HY-E635 Translucent 35±2 8000±2000 =60 =13 =400 1:1 Addition cure silicon rubber for artificial stone products Points of attention: 1,Prone to poisoning, can not mix with condensation, ionic compounds containing N, S-, P, organic matter and of Sn, As, Hg, Ph., easy molding plastic poisoning, resulting in the phenomenon of not curing. 2,Comparing with Condensation cure silicone, Addition cure silicone's adhesive properties to be worse. 3,Addition cure silicone affect by temperature greatly when cured under room temperature. 4,Addition cure silicone is easy to poisoning, please clean the tools which are used for condensation silicone rubber, so that it can avoid poisoning. It’s fobidden to add the pigment or powder to addition cure silicone rubber arbitrarily,it’s easy to make the catalyst to be poisoning. 5,Addition cure silicone rubebr has two-component, the component A and component B, please pay attention to clean the component A containers before using for the component B, and vice versa 6,In order to avoid the hardness change, we should mix the component A and component B according to its mixing ratio strictly, no atter it’s 1 : 1 or 10 : 1.
Use : mould making liquid silicone rubber/polymer Purity : 99% Appearance : colorless Viscosity : 25cs - 100000cs Certificate : iso 9001:2008, sgs, reach Type : synthetic fibers, synthetic resin and plastics, synthetic rubbers Quantity required : 100 tons Shipping terms : cif Destination port : dubai, uae Payment terms : negotiable
Molding hardness : 30 & 70 Origin - guangdong, china (mainland) Quantity required : 150 ton Shipping terms : cnf Destination port : iran Payment terms : l/c
Model no. Surface treatments Made in taiwan, roc Painless surface treatments with tsk Key features Nano silicon anti-stain and easy to clean surface anti-sticking processing for semiconductor optoelectronic areas such as: Large panel sucker, semiconductor wafer vacuum sucker. Product details: Tensky a+001-dcec-z agent is the parent metal strengthening fluidwhich develops by the brand-new technology and the idea becomes, because of theseepage parent metal surface achieved the strengthened effect, smooth, the anti-dirty dirt, the anti-oil, dials the watereasily, clean and so on the functions, the transparent low membrane thickcharacteristic except does not affect the original outward appearance, also hasthe colorful color effect, causes the product to have the competitive power, promotes the product image and the sense of reality largely, the ultimate weapon which is theproduction high-quality product or enhances when product attachment valuecannot be neglected, is may take along the type product important sharp weapon. This product is suitable for the commonglass, the ceramics, the metal sheet metal, the leather, the cotton materialand so on; for example building glass, automobile glass, products and so onbathroom care, galvanization hardware. Pointto>100 water contact angle;#30?#40surface tension dyne pen polycondensation singular pen (lower) and may not beattached to wipe? We produce ceramic coatingparts to any kind of materials.
Funny shape baking silicone cake mold
Sample available animal shape silicone mold food grade new cartoon silicone cake mold
Description STS2200 insulating glass silicone sealant is a neutral curing silicone sealant with high modulus and high strength, purposely designed for glazing insulating glass. It has the advantage of low air permeability. STS2200 insulating glass silicone sealant works with two-component mixing equipment and the two components react quickly after mingled in scale, then cures to elastomer. Characteristics A.STS2200 belongs to rtv-2. It’s curing speed can be adjustable, and the deep-seated curing speed is fast, and it is suitable to be used in the factory; B. Neutral curing, non-corrosive to metal, coated glass etc. C. High modulus and high strength; D. Release low-molecular-weight alcohol and no unpleasant odor during cure; E. Excellent resistance to weather, uv, ozone, water; F. Remains flexible over a temperature range of-58°f(-50°c) to302°f(150° c) G. Good compatibility with other neutral silicone sealants. Applications As a secondary edge adhesive sealant in insulating glass units.
We supply fuel oil, lpg and other petroleum products from iran either fob bandar abbas or cif.
Specification : 1.100% food grade silicone material, nontoxic to humans body, with environmental protection 2. Temperature range:-40~260 centigrade 3. Unbreakable, pliable, and not fragile 4. Non-stick finish, durable and easy to clean 5. Suitable for microwave oven and deep-freezer 6. Different style and color available 7. Pattern and logo can be emlbossed, debossed and silk printed on bowl 8. Any color and size available 9. Oem orders are welcomed 10. It is good and necessary part of the household and kitchen
Pm150 has excellent thermal conductivity and electrical insulation performance. Not only satisfy for majority Electronic products thermal insulation requirements, but also widely used in the thermal requirements that are not too high in electronic products. With the stable heat conduction performance, and the product also has the viscosity, easy to use. Pm150 is using soft silicone material heat-conducting, stable insulation performance, use in transmission Interface between the electronic equipment and heat sink, which achieve heat transfer and insulation effect. Applications: 1.Led lighting, lighting equipment 2.Household appliances lcd display 3.Between semiconductor and heat sink 4.Communication product, smart phone, tablet . 5.Desktop, notebook and other portable computer 6.Large power supply etc. Performance and characteristics: 1.High thermal conductivity, heat transfer coefficient 1.5w/m-k 2.Stable performance, low thermal resistance, effectively improve the heat transfer speed 3.Low hardness, its viscosity high, easy to use 4.By ul and v-o certification standards Specification: Standard size : 200mm*400mm, 300mm*300mm, according to customer needs cutting type. Basic thickness 0.3mm~15mm, special thickness size can be customized Its slightly viscous, if need to strengthen the adhesive can be according to customer’s requirement Product color is mass production color, special color can be adjusted to actual situation .
Pm150 has excellent thermal conductivity and electrical insulation performance. Not only satisfy for majority Electronic products thermal insulation requirements, but also widely used in the thermal requirements that are not too high in electronic products. With the stable heat conduction performance, and the product also has the viscosity, easy to use. Pm150 is using soft silicone material heat-conducting, stable insulation performance, use in transmission Interface between the electronic equipment and heat sink, which achieve heat transfer and insulation effect. Applications: 1.Led lighting, lighting equipment 2.Household appliances lcd display 3.Between semiconductor and heat sink 4.Communication product, smart phone, tablet . 5.Desktop, notebook and other portable computer 6.Large power supply etc. Performance and characteristics: 1.High thermal conductivity, heat transfer coefficient 1.5w/m-k 2.Stable performance, low thermal resistance, effectively improve the heat transfer speed 3.Low hardness, its viscosity high, easy to use 4.By ul and v-o certification standards Specification: Standard size : 200mm*400mm, 300mm*300mm, according to customer needs cutting type. Basic thickness 0.3mm~15mm, special thickness size can be customized Its slightly viscous, if need to strengthen the adhesive can be according to customer’s requirement Product color is mass production color, special color can be adjusted to actual situation .
SiC Sintered silicon carbide seal ring ( rotary face and stationary ring ) Huihan supplies ceramic seal rings with great mechanical properties which is widely used in pumps, valves, automotive engineering, and medical analysis equipment or even in the fully automatic coffee machines used in homes every day. Material: Pressureless sintered silicon carbide, reaction bonded silicon carbide, tungsten carbide Character: Exceptional resistance to corrosive and abrasive environments High temperature resistance
Specification BrandCodeMg (%)Re (%)Si (%)Ca (%)Al (%)Ti (%)Fe (%) Fesimg5re25-24.0-6.01.0-3.038-442.0-3.0 -
??(specification): Type chemical composition(%) Ca si c al p s = = Ca31si60 31 55-651.0 2.4 0.04 0.05 Ca28si60 28 55-651.0 2.4 0.04 0.05 Ca24si60 24 55-651.0 2.5 0.04 0.04 Ca20si50 2050-601.0 2.5 0.04 0.04 Ca16si55 1650-601.0 2.5 0.04 0.04 Ca28si50 2850-551.0 2.5 0.04 0.04 Ca30si50 3050-551.0 2.5 0.04 0.04 Ca10si40 1040-450.5 2.0 0.05 0.05 Also can execute the production according to customer's special requirement Size: 1-3mm, 10-30mm, or as per customer detail required Packing : 1mt bag, 25kg one bag in 1mt big bag Payment terms: t/t or irrevocable letter of credit at sight. -
My company product silicon metal,The grade include 441.421.551.553. The packing is 1000kg plastic woven bags. PORT:QingDao port Delivery date:shipped in 25days after payment. Payment:Fob or TT. Supplier place:AnYang city China.
Wacker 623 similar pad printing silicone is excellent applied for printing pads making of perfect irregular patterns On plastics toys, on plastics toys, electronic toys, trademarks, keyboards, electroplating products Etc. Lectronic toys, trademarks, keyboards, electroplating products etc. Part a : 1kg, 5kg, 10kg, 20kg, 25kg, 200kg, vacuumed packing in white color Part b: 1kg, 5kg, 10kg, 20kg, 25kg, 200kg, vacuumed packing in sky blue color
Ferro alloys, silico manganese, ferro manganese, ferro crome, ferro silicon.
Ferro alloys such as ferro silicon, ferro manganese, ferro chrome, silicon metal, calcium silicon, silicon manganese, silicon magnesium.
