Features:
1.One component,neutral curing,non-corrosive to metal, coated glass, marble etc.
2.Prime-less adhesion to most building materials.
3.Remains flexible over a temperature range of
4.Excellent weatherability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes.
5.Good compatibility with other neutral silicone sealants.
6.The material is supplied as a paste, which cures into extremely tough elastomeric silicone rubber ensuring a durable, flexible, watertight bond upon exposure to atmospheric moisture.
Main applications:
1.Sealing in joints.
2.Glazing for door and window.
3.Various interior decoration glass, aluminum, ceramic, tile, wood and metal, etc.
4.Many other uses.
Limitations:
1.Can not be used in structural glazing applications.
2.Is not appropriate for all will be leaking oil, plasticizer or solvent surface.
3.Is not suitable for airtight place, because the silicone sealant need absorb air gas in the water cure.
4.Not for frost or wet surface.
5.Is not suitable for the place of continuous immersion or year-round moisture.
6.Surface temperature is not below 0¡æ or above 50 ¡æ.
7.Can not contact with strong acids or bases.
8.Cannot be used on joint which bearing structural strength or places of physical damage.
9.Has performed adhesion and compatibility tests on project substrates and all accompanying accessories.
Typical properties:
These values are not intended for use in preparing specifications.
MethodTest ItemUnitStandard Result
GB/T 13477Density g/cm3Specified value 0.1 1.3
GB/T 13477 (ISO 7390) Slump(vertical) mm ¡Ü3 0
GB/T 13477 (ISO 8394) Extrusion rate ml/min 80 380
GB/T 13477(ASTM D 2377) Tack free time h0.9
GB/T 13477 (ISO 7389) Extension recovery8088
GB/T 1347(ASTM C 794) Peel strengthN/mm1.0 1.5
GB: Chinese National Standard
ASTM: American Society for Testing and Materials
ISO: International Standardization Organization
The GB¡± testing method is equivalent or partly equivalent to that in the
Installation:
1.Surface preparation: Sealants may not adhere or maintain long-term adhesion to substrates if the surface is not prepared and cleaned properly before sealant application.Using proper materials and cleaning procedures is vital for sealant adhesion.
2.Cleaning materials:clean, fresh solvent; clean, white cloths free of lint or other lint-free wiping materials; primer (when required).
3.Cleaning procedures:Remove all loose material (such as dirt and dust), plus any oil, frost or other contaminants from the substrates to which the sealant will be adhered. Do not use detergent to clean the substrate as residue may be left on the surface. Wet one rag with solvent and wipe the surface with it, then use the second rag to wipe the wet solvent from the surface before it evaporates. Change the cleaning rags frequently, as they become soiled. If cleaned areas are again exposed to rain or contaminants, the surface must be cleaned again.
4.Primers: GP111 general purpose silicone sealant will bond to many clean surfaces without the aid of a primer. For difficult-to-bond substrates, the use of a primer or special surface preparation should be evaluated.
Emergent Treatment:
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.
Shelf Life:
9 months from the manufacture date stored in cool & dry place below 27 ¡æ.
Color:
Clear, black, white, gray, other colours as clients¡¯ requirement.
LIMITED WARRANTY INFORMATION ¨C PLEASE READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer¡¯s tests to ensure that Foshan Shunde Mimdy Sealant Co., Ltd.¡¯s products are safe, effective, and fully satisfactory for the intended end use.
FOSHAN SHUNDE MIMDY SEALANT CO., LTD.SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
Foshan shunde mimdy sealant co., ltd. Disclaims liability for any incidental or consequential damages.
Easy of use all temperature gunability.
Primerless adhesion upon curing will form a strong bond to most common building components without the use of a primer.
Long-life reliability cured sealant stays elastomeric from -50 C to 150 C without hardening, cracking or becoming brittle under normal weather conditions.
like Dow Corning 789 Silicone Sealant
Dowsil 789 Silicone Weatherproofing Sealant
Product Description .
Acryrub Ps a high-quality, plasto-elastic onecomponent joint ro+ isealant based on acrylic dispersions.
Key Features:
Very easy to apply.
Colour fast and waterproof after curing.
Can be painted over after curing.
Very good adhesion on many porous surfaces and aluminium.
Easy tooling & finishing.
Non toxic & non flammable.
No mass-water clean up.
Paintable
Application:
Joints with movements up to 15%.
Connection joints in the building industry.
Joints between windowsills, between skirting-board and floor between brickwork etc.
Filling all gaps & cracks.
Perimeter sealing around doors and windows.
Modular kitchen sealing.
Cupboard sealing.
Shelf life And Storage: 12 months from date of manufacturing in unopened packaging stored in a cool and dry place at recommended temperatures between Protect against frost.
quality like mcoy , boss & fevisil ( pidilite)
Additional Information:
Item Code: 001
Production Capacity: 4 ton / day
Delivery Time: 3-4 days
Packaging Details: 1 box 24pcs master box 4 24 96pcs
Product DescriptionWe are a leading Suppliers GP Plus, BSealant, GP Silicone Sealant is a high-quality,elastical one-component joint sealant based onsilicones.Characteristics:- Very easy application- Permanent clear, UV-resistant- Stays elastic after curing- Very good adhesion on many materials- Typical acetic smell- General sealing for automotive applicationsApplications:Building- and construction jointsGlazing and connection jointselastic joints in coldstore and container applicationsSealings in air condition systemsGeneral sealing for automotive applications.
euroking weatherproofing silicone sealant 789 A one part, neutral cure, architectural grade sealant designed for general weathersealing. It easily extrudes in any weather an quickly cures at room temperature to produce a durable, flexible silcone rubber seal.
High Tempreture Silionce Sealant
Formulated In The USA
Manufactured In The Sultanate Of Oman
Take Above 280 Celcious Tempreture
GROSS WEIGHT 330GMS
Gasket Maker
product description:
Material: 100% silicone
Any colors are available,
certificated:LFGB
Characteristic:
100% Food grade silicone raw material
No taste, no toxic, eco-friendly.
High temperature resistance,aging,operative temperature:-40 260
For industrial use car use peristaltic pump use
Various colors and sizes are available
product introduction:
1.material:100%silicone
2.color:customized
3.continuouse use temp:-40 260
4.no taste,no toxic,eco-friendly
feature:
1.made of 100% food grade silicone
2.radio opaque line through the length for X-ray visualization
3.easily cut to your desired length
4.high temperature resistance:-40~260celsius
CVD Diamond has been recognized an ideal material for various applications because of its outstanding properties which includes extreme hardness and strength, high thermal conductivity, low thermal expansion, excellent dielectric properties, resistance to chemical attack, and optical transmission over a wide spectral range. It can be widely used in complex tooling and machining processes, thermal-management applications, semiconductor industry and microwave engineering.
Microwave-Transparent Windows and Optics
We supply high-quality diamond optical products that are transparent in the microwave region with a wide range of size and thickness. With our cutting-edge laser technologies, we can customize the optical windows in any shape and dimension according to clients requirement.
Specifications:
Diameter of 65mm (F150mm on request)
Double side surface roughness: Ra 10nm
Flatness: 4um/cm
With higher transparency
Thickness less than 0.5mm
Can be laser cut to any size and shapes
We are scrap yard in Poland which specialize in dismantling transformers. We would like interest you with our crgo,hrgo 0,27-0,35mm sheets from used transfomers.
We can provide wholesale silicone sheets from used big transfomers. Please let me know if you are interested then I will send you our stock.
4974 Non Metallic Elements Suppliers
Short on time? Let Non Metallic Elements sellers contact you.
