Nickel Wire 0.025 mm diameter, 99.9016% purity sold in case of 26 bobbins. Total net weight 5,169g. IGAS Research certified. Minimum order quantity: 1 million meters. Ships from Dubai.
OD: 10 - 325mm WT: 1.0 - 30mm Length: up to 12m Application: Chemical, Petrochemical, Energy, Aerospace, Oil and Gas, Nuclear industries. Process method: Cold drawn, Cold rolling Finishing: Heat treatment, annealed, acid washing, manual and mechanical Chemical Analysis of Alloy 400(UNS NO4400) ASME SB127/AMS 4544 C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe 3Max 2.0Max .02Max .024Max .5Max 63Max 28-34 2.5Max Chemical Analysis of Alloy 600(UNS NO6600) ASME SB163/ASME SB516(inconel 600) W Nr2.4816 C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe .15Max 1.0Max .015Max .5Max 14-17 72Min .5max 6-10 Chemical Analysis of Incoloy800HTASME SB407 ASME407 ASME SB163 C Cr Ni Ti Al Fe Al+Ti Grain 0.06-0.1 19-23 30-35 0.15-0.6 0.15-0.6 39.5Min 0.85-1.2 5 or coarser
Inconel 600 is a nickelbase alloy with excellent carburization, and good oxidation resistance at elevated temperatures. The alloy is widely used in the heat treating industry. 600 alloy has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Alloy 600 is not suggested for use at red heat when sulfur is present due to elevated nickel quantities. Grades 200 and 201 nickel are normally preferred for handling concentrated, high temperature caustic. However, when sulfur compounds are present as well, or for ammonium hydroxide service, 600 alloy is suggested. 600 alloy is subject to stress corrosion cracking in hot, concentrated caustic alkalies. To avoid stress corrosion cracking, the 600 alloy fabrication should be fully stress relieved prior to use. A minimum treatment of 1650°F for 1 hour is suggested, but 1800-1850°F for 1 hour preferred.
Name Nickel Sheet / Nickel Plate Standard ASTM, ISO, JIS, GB Material Ni200, Ni201, Inconoly, Inconel, Hastelloy etc. Dimension THK 0.5 ~ 60mm * W=2000mm * L= 8000mm Condition Annealed Application Chemical Industry, Petroleum Industry, Nuclear Power Industry, Marine Industry, Electrolytic Industry etc. Certificate ISO 9001:2008, MTC or The Third Party
Name Nickel Bar / Nickel Rod Standard ASTM, ISO, JIS, GB Material Ni200, Ni201, Inconoly, Inconel, Hastelloy etc. Dimension Dia. 6 ~ 200 mm Condition Annealed Application Chemical Industry, Petroleum Industry, Nuclear Power Industry, Marine Industry, Electrolytic Industry etc. Certificate ISO 9001:2008, MTC or The Third Party
Nickel carbonate basic for electroplating, catalysts, etc.
Nickel alloy Instrumentation fittings are formed from nickel alloys, which are metals made by combining nickel with another substance as the primary constituent. It mixes two materials to produce improved properties such as greater strength or corrosion resistance. Because of its particular characteristics, it's employed in a wide range of equipment across a wide range of sectors. Nickel alloy is made by combining nickel with other metals such as titanium, copper, aluminum, iron, and chromium. Nickel alloy instrumentation fittings are more resistant to corrosion at temperatures above 1800 F. This makes them excellent for usage in harsh environments. Nickel alloy instrumentation fittings are resistant to oxidation and corrosion at high temperatures. Nickel alloy instrumentation fittings are very ductile and have high melting temperatures. They can be electroplated and welded readily, making them excellent for sectors that deal with extreme heat and cold. Nickel alloy instrumentation fittings can be put to use for approximately 25 to 35 years. It can survive for an even longer period of time depending on the application. Because of its extended service life, this metal is less expensive than other metals Nickel alloy instrumentation fittings are utilized in a wide range of applications due to their qualities, including food preparation equipment, medical equipment, laboratory equipment, aircraft, pharmaceuticals, building materials, aircraft and power turbines, nuclear power systems, and so on. Specification of Nickel Alloy Instrumentation Fittings Imperial Size 1/2 to 2 Size 1/16 OD to 2 OD, 2mm OD to 50mm OD Thread NPT, BSP, BSPT, UNF, ISO, SAE, MS, AN, weld ends etc. Pressure Rating 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass Temperature Ratings Up to 1000F (537C) Types Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories Application Power/ gas/ petroleum/ chemical/ metallurgy/ shipbuilding etc. Our service Nace Mr 01 75 Sour Service Impact Test As Per Ug 84 Macro Structure Analysis Hydrogen Induce Cracking Test (Hic) Sulphide Stress Cracking Test (Sscc) Cryogenic Services (Cryo),hydrogen Services (H2) Helieum Leak Test Dye Peniterant Test (Dp) Magnetic Partius Test (Mp) Post Weld Heat Treatment (Pwht) Ultrasonic Test (Ut) Hydro Test, Etc. Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Production Technique Forged/ Heat treated and machined.
Nickel Alloy Instrumentation Reducer
Nickel Alloy Instrumentation Cross
Nickel Alloy Condensate Pot
Nickel Alloy Snubber
Nickel alloy instrumentation accessories are used for quite a lot of applications like heat exchangers, oil and gas industry equipment, pulp and paper industry, and so on. Nickel alloy instrumentation accessories have excellent resistance to unvarying pitting and crevice corrosion. Nickel alloy Temperature Guage have different types like nickel alloy 201 front ferrule, nickel alloy 201 union elbow, nickel alloy 201 union tee, and so on. Nickel alloy instrumentation accessories are incredibly resistant to several different types of corrosion, heat resistance, industrial environments tend to be incredibly hot, and mechanical properties. Nickel alloy Flanged Dill/Schrader Valve Air Shaft performed better at temperatures above 1000 degrees Celsius making them suitable for use in extreme conditions. Nickel alloy instrumentation accessories have a good oxidation resistance at high temperatures. These instrumentation accessories are extremely ductile, in addition to having high melting temperatures and resistance to oxidation and corrosion. They can be electroplated and easily welded, making them ideal for industries that deal with extremely high and low temperatures. Nickel alloy instrumentation accessories have an average life expectancy of 25 to 35 years, although depending on the application, they can last considerably longer. This material is less expensive than other metals due to its longer service life
Syphon Size 1/2 inch Condensate Pot Size Pipe size 2, 3, 4, 6 and larger size upon request. Standard length: Pipe length 8, 10, 12, and larger length upon request. Pipe Schedule: 40, 80, 160, seamless pipe. NPT as per ANSI B2.1 taper pipe thread furnished. Socket weld as per ANSI B16.11 Butt weld as per ANSI B16.9 Working pressure: 6000 PSIG (41.34 MPa). Snubber Size Bore sizes 3/4 to 10 in diameter Travel ranges from 5 to 20 Load capacities from 738 lbs. to 187,900 lbs. Pipe Clamps 1/2 - 18 Inch Types Condensate Pot, Air Header, Pipe Clamp, Quick Release Coupling, Syphon Tube / Pipe, Pipe Clamp, Snubber, Lock Nut For O-seal, Gauge Snubber, Thermocouple, Thermowell, Gauge Adaptors, Gauge Saver, Pressure Gauge Accessories, Mini Ball Valve, Over-Pressure Protector, Cooling Tower, Adjustable Snubber Application Power/ gas/ petroleum/ chemical/ metallurgy/ shipbuilding etc. Air Header Size Inlet Connection Size:1/2, 3/4, 1 inch Raised Face, Female NPT, BSPT, BSPP 2,3 & 4 inches Drain Connection Type:Female NPT, BSPT, BSPP Drain Port Size:1/2, 3/4, 1 Working Pressure:6000 psi [413 bar] Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
Nickel Alloy Condensate Pot
Nickel Alloy Air Headers
Nickel Alloy Snubber
The product is in UAE. The product is in 8 sealed cases. Each case contains 803,750 meters. The minimum quantity to buy is at least one case. Name of the goods: Nickel Wire 99.98% Diameter: 0.025 mm Total Quantity: 162 Bobbins in 8 plastic boxes (SEALED) Net Weight: 36,025 Kg (NET) Length: 6,430,000 Meters (treated with Uranium) NOTE: - This nickel wire is versatile and can be utilized for various purposes such as nuclear research, radiation shielding studies, radiation sensors, and more. - All of the required certificates, reports, etc to show the validity of the product.
We, as manufacturers of high-purity metals, announce that we can supply the following products: Nickel wire grade DKRNT-0,025-KT-NP (diam. 0.025 mm) Quality: NP2 (99,6 -99,8% Ni), NP1 (99,93 -99,98% Ni), NP0 (99,99 -99,995% Ni) Quantity: up to 500 kg monthly. Price: NP2 (99,6 -99,8% Ni). Price: from 0,55 EUR/meter. NP1 (99,93 -99,98% Ni). Price: from 1,10 EUR/meter. NP0 (99,99 -99,995% Ni). Price: from 5,75 EUR/meter. Minimum order 5000000 metres. Our production of extra pure metals is located in Azerbaijan. Prices are on FCA Baku sale condition, factory manufacturer. All information about our products on our website
NP1 nickel wire on bobbins. 30 rolls between 250gr/55000 meters to 350gr/77000 meters. MOQ is set at 1 roll equal to 55000 meters. FOB origin Price variable depending on quantity ordered Chemical analysis available on request. Inspection available upon receipt of letter-of-intent
Asset: Nickel Wire Diameter: 0.025mm Purity: 99.94% Net Weight: 2007 Grams - 1Box Length: 456,136 Meters - 48 Bobbins
