ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ) , UNS 4400 (MONEL 400 ) , , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 ( INCONEL 601 ) , UNS 6625 (INCONEL 625) , UNS 10276 ( HASTELLOY C 276 )
ASTM / ASME SB 160 UNS 2201 (NICKEL 201 )
ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Copper Alloy
ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600.
ASTM / ASME SB 151 UNS NO. 70600 , 71500 , C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30) ,ASTM / ASME SB 152 UNS NO C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200.
ASTM / ASME SB 111 UNS NO. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500.
ASTM / ASME SB 466 UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30)
Nickel Wire 0.025 mm diameter, 99.9016% purity sold in case of 26 bobbins. Total net weight 5,169g. IGAS Research certified. Minimum order quantity: 1 million meters. Ships from Dubai.
OD: 10 - 325mm
WT: 1.0 - 30mm
Length: up to 12m
Application: Chemical, Petrochemical, Energy, Aerospace, Oil and Gas, Nuclear industries.
Process method: Cold drawn, Cold rolling
Finishing: Heat treatment, annealed, acid washing, manual and mechanical
Chemical Analysis of Alloy 400(UNS NO4400) ASME SB127/AMS 4544
C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe
3Max 2.0Max .02Max .024Max .5Max 63Max 28-34 2.5Max
Chemical Analysis of Alloy 600(UNS NO6600) ASME SB163/ASME SB516(inconel 600) W Nr2.4816
C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe
.15Max 1.0Max .015Max .5Max 14-17 72Min .5max 6-10
Chemical Analysis of Incoloy800HTASME SB407 ASME407 ASME SB163
C Cr Ni Ti Al Fe Al+Ti Grain
0.06-0.1 19-23 30-35 0.15-0.6 0.15-0.6 39.5Min 0.85-1.2 5 or coarser
Inconel 600 is a nickelbase alloy with excellent carburization, and good oxidation resistance at elevated temperatures.
The alloy is widely used in the heat treating industry.
600 alloy has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures.
Alloy 600 is not suggested for use at red heat when sulfur is present due to elevated nickel quantities.
Grades 200 and 201 nickel are normally preferred for handling concentrated, high temperature caustic.
However, when sulfur compounds are present as well, or for ammonium hydroxide service,
600 alloy is suggested. 600 alloy is subject to stress corrosion cracking in hot, concentrated caustic alkalies.
To avoid stress corrosion cracking, the 600 alloy fabrication should be fully stress relieved prior to use.
A minimum treatment of 1650°F for 1 hour is suggested, but 1800-1850°F for 1 hour preferred.
Name Nickel Sheet / Nickel Plate
Standard ASTM, ISO, JIS, GB
Material Ni200, Ni201, Inconoly, Inconel, Hastelloy etc.
Dimension THK 0.5 ~ 60mm * W=2000mm * L= 8000mm
Condition Annealed
Application Chemical Industry, Petroleum Industry, Nuclear Power Industry, Marine Industry, Electrolytic Industry etc.
Certificate ISO 9001:2008, MTC or The Third Party
Name Nickel Bar / Nickel Rod
Standard ASTM, ISO, JIS, GB
Material Ni200, Ni201, Inconoly, Inconel, Hastelloy etc.
Dimension Dia. 6 ~ 200 mm
Condition Annealed
Application Chemical Industry, Petroleum Industry, Nuclear Power Industry, Marine Industry, Electrolytic Industry etc.
Certificate ISO 9001:2008, MTC or The Third Party
Nickel alloy Instrumentation fittings are formed from nickel alloys, which are metals made by combining nickel with another substance as the primary constituent. It mixes two materials to produce improved properties such as greater strength or corrosion resistance. Because of its particular characteristics, it's employed in a wide range of equipment across a wide range of sectors. Nickel alloy is made by combining nickel with other metals such as titanium, copper, aluminum, iron, and chromium.
Nickel alloy instrumentation fittings are more resistant to corrosion at temperatures above 1800 F. This makes them excellent for usage in harsh environments. Nickel alloy instrumentation fittings are resistant to oxidation and corrosion at high temperatures. Nickel alloy instrumentation fittings are very ductile and have high melting temperatures. They can be electroplated and welded readily, making them excellent for sectors that deal with extreme heat and cold.
Nickel alloy instrumentation fittings can be put to use for approximately 25 to 35 years. It can survive for an even longer period of time depending on the application. Because of its extended service life, this metal is less expensive than other metals
Nickel alloy instrumentation fittings are utilized in a wide range of applications due to their qualities, including food preparation equipment, medical equipment, laboratory equipment, aircraft, pharmaceuticals, building materials, aircraft and power turbines, nuclear power systems, and so on.
Specification of Nickel Alloy Instrumentation Fittings
Imperial Size 1/2 to 2
Size 1/16 OD to 2 OD, 2mm OD to 50mm OD
Thread NPT, BSP, BSPT, UNF, ISO, SAE, MS, AN, weld ends etc.
Pressure Rating 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
Temperature Ratings Up to 1000F (537C)
Types Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories
Application Power/ gas/ petroleum/ chemical/ metallurgy/ shipbuilding etc.
Our service
Nace Mr 01 75
Sour Service
Impact Test As Per Ug 84
Macro Structure Analysis
Hydrogen Induce Cracking Test (Hic)
Sulphide Stress Cracking Test (Sscc)
Cryogenic Services (Cryo),hydrogen Services (H2)
Helieum Leak Test
Dye Peniterant Test (Dp)
Magnetic Partius Test (Mp)
Post Weld Heat Treatment (Pwht)
Ultrasonic Test (Ut)
Hydro Test, Etc.
Test Certificates
EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production Technique Forged/ Heat treated and machined.
Nickel alloy instrumentation accessories are used for quite a lot of applications like heat exchangers, oil and gas industry equipment, pulp and paper industry, and so on. Nickel alloy instrumentation accessories have excellent resistance to unvarying pitting and crevice corrosion. Nickel alloy Temperature Guage have different types like nickel alloy 201 front ferrule, nickel alloy 201 union elbow, nickel alloy 201 union tee, and so on.
Nickel alloy instrumentation accessories are incredibly resistant to several different types of corrosion, heat resistance, industrial environments tend to be incredibly hot, and mechanical properties. Nickel alloy Flanged Dill/Schrader Valve Air Shaft performed better at temperatures above 1000 degrees Celsius making them suitable for use in extreme conditions.
Nickel alloy instrumentation accessories have a good oxidation resistance at high temperatures. These instrumentation accessories are extremely ductile, in addition to having high melting temperatures and resistance to oxidation and corrosion. They can be electroplated and easily welded, making them ideal for industries that deal with extremely high and low temperatures.
Nickel alloy instrumentation accessories have an average life expectancy of 25 to 35 years, although depending on the application, they can last considerably longer. This material is less expensive than other metals due to its longer service life
We, as manufacturers of high-purity metals, announce that we can supply the following products:
Nickel wire grade DKRNT-0,025-KT-NP (diam. 0.025 mm)
Quality:
NP2 (99,6 -99,8% Ni),
NP1 (99,93 -99,98% Ni),
NP0 (99,99 -99,995% Ni)
Quantity: up to 500 kg monthly.
Price:
NP2 (99,6 -99,8% Ni). Price: from 0,55 EUR/meter.
NP1 (99,93 -99,98% Ni). Price: from 1,10 EUR/meter.
NP0 (99,99 -99,995% Ni). Price: from 5,75 EUR/meter.
Minimum order 5000000 metres.
Our production of extra pure metals is located in Azerbaijan.
Prices are on FCA Baku sale condition, factory manufacturer.
