daq modules and standalone systems with 48 channels and 1sec sampling rate
Airconet Control Split or Window AirCon from anywhere in the world (via Wifi or 3G/4G) Control Cold / Hot / Auto / Fan / Dry mode, Set Point and Fan 1, 2, 3, Auto 2-way communication (status feedback and sync with airconâ??s remote control) Automatic aircon brand selection via airconâ??s remote control Compatible with major aircon brand with remote control (other aircon brand has to be pre-implemented in our factory) Plug and Play no need installation Measure Room temperature via built-in temperature sensor NTC No need additional controller (standalone product) Miniature size of 30*30*8mm (almost invisible on the wall) Turn ON the air condition to its last status in memory Replace Aircon's remote control
In-vehicle communication gateway High Performance (iMX6 Dual Cortex-A9) processor supports Android, YoctoSupports Android, Yocto ï?? Rich I/O interfaces (USB2.0, GPIO, Ethernet, I2C, GPIO, CAN bus, HDMI, etc.) 3G/LTE module, GPS receiver, WiFi/BT, G-sensor, Isolated GPIO +9V ~ +36V wide DC input and (optional) over-voltage/reverse-voltage protection Typical Applications In-vehicle computer Vehicle black box Fleet Management IOT gateway
The Dual Sim card Cellular IoT Modbus RTU is design for working in the harsh industrial application environment, converting Modbus TCP/RTU to SMS and cloud platform. widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system, BTS monitoring, remote data acquisition, telemetrically systems, automatically control system. It can be used as a remote switch, remote I/O, remote smart PLC, timer switches. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems.
High-performance industrial-grade cellular router adopts 32-bit processor, developed based on Linux system, supports GSM/2G/3G/4G/GPRS/EDGE/WCDMA/HSPA+/LTE network, provides high-speed wireless network bandwidth for the device through wireless connection, and has automatic detection of network disconnection, automatic restart of dial-up failure, and scheduled restart to ensure network Stable connection.
Android 4K network advertising digital signage media player Dual Band WiFi, Gigabit LAN used as signage player too Highlight: *Rockchips RK3288 Quad core *GPU: Mali-T764 3D GPU (OpenGL ES 1.1/2.0 /3.0,and OpenCL 1.1) *Android 7.1 OS *2G RAM,8G/16G ROM high capacity memory *With WIFI 802.1b/g/n AC Wireless to get rid of the wire bond *Connectors: HD, AV out,Optical,RJ45,MicroSD card slot, USB hostx2 *Build in Blue tooth *Support the latest HTML5,Flash11, etc. *Support external 3G USB Dongle *There are more than 600,000 Google Play apps and games for a great experience *Extension ports support 2.4GHz wireless mouse, wireless keyboard with touchpad, etc, while a micro-SD slot lets you add more storage memory up to 32GB
4G Industrial Router R10 Prove high speed wireless data access internet,support 1LAN,WIFI,and RS485 or RS232 serial port.suitable for IIOT applications. The R10 is an industrial 4G LTE/3G cellular routers and IoT gateways, featuring Ethernet/wireless/Wi-Fi connectivity, VPN security, high reliability, it supports RS232/RS485 to 4G Lte data transmission and WIFI 802.11 b/g/n. It is certified on major carriers networks, ideal for smart grid, industrial automation, remote monitoring, transportation and IoT/M2M applications. 4G Industrial router R10 is an industrial IoT high-speed router, compatible with 4G/3.5G/3G/2.5G network, flagship configuration, VPN link, industrial protection, wide temperature, wide voltage design, easy to set up high speed, stable The wireless transmission network uses the public LTE network to provide users with wireless long-distance data transmission.
4G Industrial Router (2SIMCards 3LAN 1WAN 1 RS485 1RS232 4AIN 2DIN 2DO) This router is an industrial IoT high-speed router, compatible with 4G/3.5G/3G/2.5G network, flagship�configuration, VPN link, industrial protection, wide temperature, wide voltage design, easy to set up high speed, stable, The wireless transmission network uses the public LTE network to provide users with wireless long-distance data transmission. The 4G router adopts high-performance industrial-grade 32-bit communication processor and industrial-grade wireless module, with embedded real-time operating system as software support platform, and provides one RS232 or RS485, 3 LAN, 1 WAN and WIFI interface, which can be connected at the same time. Serial devices, Ethernet devices, and WIFI devices implement transparent data transmission and routing. 1.Support hundreds of 3G/4G wireless modules, plug and play; 2.Intelligent anti-drop line, support online detection, online maintenance, automatic redial of dropped calls, ensuring that the device is always online; 3.Cloud remote background management, ad push, remote upgrade and remote configuration; 4.Local network PHP browsing and remote synchronization of local storage content; 5.Support serial port TCP/UDP transparent data transmission or AT command transmission; 6.SMS control route online and offline, short-term notification of routing status; 7.Support VPN security tunneling, including PPTP, L2TP; 8.Complete and robust router function, support multiple Internet access methods: automatic allocation, specified IP, PPPoE; 9.Support ARP, DDNS, DHCP, DNS , HTTP,HTTPS, ICMP, PPP, PPPoE, SMTP, SNTP, SSL,TCP/IP, Telnet, UDP protocols; 10.Support serial port local TFTP, web software upgrade. Contact :kp07@iot-solution.com www.iot-solution.com skype:samchinese Tel�? +86-755 29451836 Mobile�?+86 135 7081 0254
APPLICATIONS: Techwin Industrial POE (Power over Ethernet) SPD (Surge Protection Device) is specially designed for Ethernet switches. The POE switch will not be damaged by lightning overvoltage, induced overvoltage, and electrostatic discharge. CAT5e and CAT5 compatible IEEE 802.3afï¼?803.1at 10/100 Base-T Ethernet protection LAN, FDDI, CDDI, ATM,WLAN PDH, SDH, SPDH Industrial control Industrial POE, With High reliability and high stability Surge protection for power supply system, SPD for low-voltage installations and device.CCTV system.
Cuckoo-HT2 is a water-, dust-, and shock-resistant LTE 4G trunking handset base on Android system with 3.5inch HD touchscreen. It provides professional voice dispatching, trunking dispatching and video dispatching in public security, energy, and transportation through public or enterprise network.
Product Features High Performance for Disaster Reponse Communications LTE Trunking Handset 3.5 inch HD touch screen is operatable with gloves on or wet fingers. 8 megapixel rear camera and 2 megapixel front camera help you take clear photos in weak light Powerful speakers gurantee you can hear clearly in noisy site. Long Range Wireless Communication Working through private networks on the 400Mhz/600Mhz/1.4Ghz/1.8Ghz bands Supporting GPS and Beidou to quickly and precisely positioning Android Platform Provide customozed special Apps based on Android platform Small Yet Rugged Design for Different Environment Professional impact resistant and tri-proof design for harsh environment Abundant functions including voice, video, trunking communications and multimedia instant message to meet the industry professional needs.
Knight-V10 serves as a wireless gateway router for LTE-based high-speed data services. It enables terminals to access the LTE network through a network port or Wi-Fi to supply LTE private network signals via wired and wireless routers. It can be deployed indoor and outdoor, and is widely used in fixed sites or vehicle-mounted single stations for data/voice collection and wireless HD video surveillance. Product FeaturesVehicle-mount CPE Broadband wireless router based on the TD-LTE technology Provides high-speed data service Actual data transmission rate of 16Mbit/s in downlink, 30Mbit/s in uplink Supports multiple frequency ranges: 1.8G, 1.4G, 800M, 400M Supports WiFi 802.11 b/g/n and 64QAM in Uplink Support remote upgrade and management Able to operate at temperatures below -40C. Embedded DHCP Server, DNS Client and NAT functions: enable high speed routing A variety of security encryptions Simple to install, maintain and operate Fully ruggedized IP65 design
Patron-P10 is designed for quick maneuver applications and supports multiple radio systems, features high capacity and performance at low power consumption. As a plug-and-play solution, it takes only 10minutes to power up and will provide 4G LTE Private Mobile network to first-responder, emergency services, tactical deployment, mining, and shipping. Product Highlights Emergency Combat Command System Fast Deployment Patron-A10 is Single box solution integrated LTE Core Network, Dispatching Sever, Base Station and Battery for fast deployment within 10minutes during an emergency. â?¢Non-Line-of-Sight Capabilities The brute computational horsepower, multi-core processors and Digital Signal Processors (DSPs) make Patron-P10 support Non-Line-of-Sight(NLOS) wireless connectivity. â?¢High Mobility Patron-P10 is a portable airdrop box design. So it supports many transports, such as placed it in vehicle, rolling on road or human carrying when the roads are muddy and even destroyed. The draw-bar mounted to the bottom of the boxes enable the rapid development system to be dragged by a person as a whole. â?¢High Integrity Patron-P10 is a highly integrated system with LTE Core Network, Base Station and Dispatching Sever for supplying a complete LTE wireless private network and multimedia dispatching service network. â?¢Large Battery Capacity Patron-P10 can operate without supply mains with built-in battery for more than 4hours.
Knight-M2 is industrial gateway and routing device offering real time sensor data collection and wireless HD video surveillance to the headquarter by long range connecting over the LTE base stations. It features a light weight, small size and body worn product design for quick deployment and easy to carry. In addition to LTE access, this industrial-grade CPE also integrates Wi-Fi and LAN interfaces to enable users to access the lte private networks for data sharing to help the relief team operate more quickly. Product Highlights â?¢2X2 MIMO Radio Knight-M2 is a 2X2 MIMO radio for individual-solider terminal collects audio and video information throught an external helmet camera and intercom headset in real time. â?¢Ratio Configuration Supports multiple uplink to downlink ratio configurations, including 3:1 for streaming dataintensive uplink services such as data collection, voice and video transmission.4G LTE Gateway â?¢Wide Frequency Range The CPE Knight-M2 operates in multi broadband frequency 400Mhz, 600Mhz, 1.4Ghz and 1.8Ghz. Key Features â?¢ Support a variety of services such as voice, video and GPS or Beidou positioning â?¢ It is wearable design for use in portable and embedded applications where have high requirement of size and weight. â?¢ Large capacity lithium battery for long time continuously working â?¢ Equiped with HD action camera for hd video stream â?¢ Easy maintenance: web based user-friendly interface for operation and maintenance
Specifications PCBA Name L02HA1 TDD-LTE: / FDD-LTE: 1,3,8,18,19 TD-SCDMA: / UMTS: 1,8 EDGE/GPRS: / WAN RF Capability LTE Chipset Marvell 1802 cat4 LTE Channel Bandwidth 1.4/3/5/10/15/20 MHz Modulation Downlink QPSK/16-QAM/64-QAM Uplink QPSK/16-QAM LTE Authentication EPS-AKA Adaptive Modulation and Coding Supported MIMO support MIMO 2x2 Idle Mode Supported Sleep Mode Supported Idle Mode Signaling Reduction (ISR) Supported Power Level TDD-LTE Power Class 3ï¼?23 +/-3dBmï¼? FDD LTE Power Class 3ï¼?23 +/-3dBmï¼? TD-SCDMA Power Class 2ï¼?24 +1/-5dBmï¼? UMTS Power Class 3ï¼?23 +/-2dBmï¼? EDGE Power Class E2ï¼?GSM850/900:33dBm;DCS/PCS:30dBmï¼? GPRS Power Class E2ï¼?GSM850/900:27dBm;DCS/PCS:26dBmï¼? Sensitivity TDD LTE -94 dBm(20MHZ) FDD LTE -93 dBm(20MHZ) TD-SCDMA -108 dBm UMTS -106 dBm EDGE GSM850/900:-98dBm;DCS/PCS:-98dBm GPRS GSM850/900:-101dBm;DCS/PCS:-99dBm Data Rate TDD-LTE 3GPP R9 ,Category 4, DL 150Mbps UL 50Mbps FDD-LTE 3GPP R9 ,Category 4, DL 150Mbps UL 50Mbps TD-SCDMA 3GPP R7 DL 2.8Mbps UL 2.2Mbps UMTS 3GPP R7 DL 21.6Mbps UL 5.76Mbps EDGE/GPRS EGPRS Class12 DL 237kbps UL 118Kbps GPRS Class12 DL 85.6kbps UL 42.8kbps LAN WIFI info WLAN Mode: 802.11b/g/n Frequency Band: 2.4GHz WLAN Channel supported:1-13 Antenna Type: Internal Supported Security: WEP64 WEP128 WPA-PSK WPA2-PSK WIFI MIMO: 1x1 Data Rate WIFI IEEE 802.11b 11/5.5 Mbps WIFI IEEE 802.11g 54/48/36/24/18/12/9/6 Mbps WIFI IEEE 802.11n 72.2/65/58.5/52/39/26/19.5/13/6.5 Mbpsï¼? System 2G/3G/4G setup Network Selection: Manual, Auto Setup by user Interoperability: TDD-LTE & TD-SCDMAï¼?TD-SCDMA & GSM, TDD-LTE & UMTS, FDD-LTE & TD-SCDMA, FDD-LTE $ UMTS, UMTS & GSM SMS: SMS over SGs Func at LTE SMS's receiving and reading APN setup: APN setup and revise PIN Func: PIN:Save, revise, lock,unlock DM: DM(Now support CMCC DM) Modem Func: Connect to PC by USB Automatically connect reconstructed: Can automatically reconnect to network after off-network in data using WIFI setup Protocol: Max users 10 DHCP client / server, you can set whether to activate the DHCP service assigns IP addresses starting and ending addresses, set the gateway address; Support client list: Displays all the DHCP server to obtain IP address of the host, including MAC address, IP address obtained Support terminal IP address, SSID, communication channel, security type, the administrator account and password factory setting Support SSID and channel settings: Set SSID, communication channel (frequency band WiFi settings, select the range of WiFi support of the band all the available channels), WIFI function on/off, and the SSID broadcast on/off Provides WEP, WPA-PSK, WPA2-PSK, WAPI encryption methods, etc.
The T01 is a leading edge 3G PTT device powered by Android OS and 4000 mAh rechargeable battery. With 3G (WCDMA: 900/1900/2100) network, it supports faster speed, better voice quality and integration of existing PTT applications like Zello, REAL PTT, PocStar, etc. T01 is an irreplaceable tool for customers valuing the convenience and productivity of being able to set up individual or group calls with the push of a button and instantly communicate over the speaker of the recipient's handset.
PCI Voice Logger provided with window base software has its utility for 08 telephone lines/PBX extns. With the help of this, the user can record the calls conversations and stack into the database via the user management software and retrieve call records when needed.
AVL-32T5PE16 Voice Logger functions for Sixteen lines of telephone/PBX extensions for call recording purposes and keeping their required details. PCI voice logger is a device that stores the recorded phone conversations into a voice database through a USB port of your computer automatically. Besides this, the management software provided along with PCI logger manages, administer and organizes the call logs. Lastly, the user also does live monitoring of the live calls, sort desired list of calls, listen to recordings, conduct quality control for specific recordings, and many others functions.
Aegis VOIP Logger solutions are suitable for recording VoIP lines, individual phones and SIP trunks. With unlimited access to the recordings, you can have multiple managers accessing the data without the need for additional cost or licenses fee. Need your agents to listen to their calls for self-training? Not a problem, no additional fees or costs are involved with Aegis VOIP Voice Logger.
Aegis XN520TURBO is a GSM Voice Terminal which has provision to establish connection with GSM Sim with two parallel FXS Ports, FXS Port can be interfaced with PBX, telephone instrument, dial pad and desktop softphone for making and receiving calls via GSM network during office hours from their desk
