Specifications PCBA Name L02HA1 TDD-LTE: / FDD-LTE: 1,3,8,18,19 TD-SCDMA: / UMTS: 1,8 EDGE/GPRS: /   WAN RF Capability LTE Chipset Marvell 1802 cat4 LTE Channel Bandwidth 1.4/3/5/10/15/20 MHz Modulation Downlink QPSK/16-QAM/64-QAM Uplink QPSK/16-QAM LTE Authentication EPS-AKA Adaptive Modulation and Coding Supported MIMO support MIMO 2x2 Idle Mode Supported Sleep Mode Supported Idle Mode Signaling Reduction (ISR) Supported Power Level TDD-LTE Power Class 3ï¼?23 +/-3dBmï¼? FDD LTE Power Class 3ï¼?23 +/-3dBmï¼? TD-SCDMA Power Class 2ï¼?24 +1/-5dBmï¼? UMTS Power Class 3ï¼?23 +/-2dBmï¼? EDGE Power Class E2ï¼?GSM850/900:33dBm;DCS/PCS:30dBmï¼? GPRS Power Class E2ï¼?GSM850/900:27dBm;DCS/PCS:26dBmï¼? Sensitivity TDD LTE -94 dBm(20MHZ) FDD LTE -93 dBm(20MHZ) TD-SCDMA -108 dBm UMTS -106 dBm EDGE GSM850/900:-98dBm;DCS/PCS:-98dBm GPRS GSM850/900:-101dBm;DCS/PCS:-99dBm Data Rate TDD-LTE 3GPP R9 ,Category 4, DL 150Mbps  UL  50Mbps FDD-LTE 3GPP R9 ,Category 4, DL 150Mbps  UL  50Mbps TD-SCDMA 3GPP R7  DL 2.8Mbps  UL 2.2Mbps UMTS 3GPP R7  DL 21.6Mbps  UL 5.76Mbps EDGE/GPRS EGPRS Class12 DL 237kbps  UL 118Kbps GPRS Class12  DL 85.6kbps UL 42.8kbps LAN WIFI info WLAN Mode: 802.11b/g/n Frequency Band: 2.4GHz WLAN Channel supported:1-13 Antenna Type: Internal Supported Security: WEP64 WEP128 WPA-PSK WPA2-PSK WIFI MIMO: 1x1 Data Rate WIFI IEEE 802.11b 11/5.5 Mbps WIFI IEEE 802.11g 54/48/36/24/18/12/9/6 Mbps WIFI IEEE 802.11n 72.2/65/58.5/52/39/26/19.5/13/6.5 Mbpsï¼? System 2G/3G/4G setup Network Selection: Manual, Auto Setup by user Interoperability: TDD-LTE & TD-SCDMAï¼?TD-SCDMA & GSM, TDD-LTE & UMTS, FDD-LTE & TD-SCDMA, FDD-LTE $ UMTS, UMTS & GSM SMS: SMS over SGs Func at LTE SMS's receiving and reading APN setup: APN setup and revise PIN Func: PIN:Save, revise, lock,unlock DM: DM(Now support CMCC DM) Modem Func: Connect to PC by USB Automatically connect reconstructed: Can automatically reconnect to network after off-network in data using WIFI setup Protocol: Max users 10 DHCP client / server, you can set whether to activate the DHCP service assigns IP addresses starting and ending addresses, set the gateway address; Support client list: Displays all the DHCP server to obtain IP address of the host, including MAC address, IP address obtained Support terminal IP address, SSID, communication channel, security type, the administrator account and password factory setting Support SSID and channel settings: Set SSID, communication channel (frequency band WiFi settings, select the range of WiFi support of the band all the available channels), WIFI function on/off, and the SSID broadcast on/off Provides WEP, WPA-PSK, WPA2-PSK, WAPI encryption methods, etc.