Media converter In conformity to ieee 802.3 10 base-t standard. In conformity to ieee 802.3u 100 base-tx/fx standard. Max. 2m buffer memory built in chip. Back pressure flow control for full duplex ieee802.3 xand half duplex. Automatic identification of mdi/mdi-x cross line. High-performance1.4gbps memory bandwidth. In conformity to safety code of fcc and 15 class a and ce mark. Outside power supply:26mm*71mm*94mm Built-in power supply:40mm*110mm*140mm
Interface converter Introduction: Ne2701bridge (also called 2mbps g.703 / ethernet interface converter) serves as a type of data communication equipment to transparently and directly convert the transmit data from 2m g.703 interface into ethernet. It is ideal for the case where low-cost bridging is required. It also can be used as a lan extension. When used as extension or segment switch, it has two working status, namely filtering and non-filtering, to determine whether all communication traffic is allowed to transport to wan circuit or not. Main features: (1 e1interface (1 utp interface, for connection to network card or hub (optional clock: internal clock (master mode); receiving and recovering clock (complete alert and status display 210mm140mm38mm
Pdh optical terminal Function: 8e1(100m ethernet interface is optional) pdh is the multi-service fiber receiving system with the core of fpga, which adopts special patent technique of reducing jitterf=digital phase locked and clock extracted techniquef=2m interface preventing interference technique, etc. It is suitable for the situations of high request reliability and assistant function, such as the specialized networks of mobile, unicom, electric power, army, police, highway and aviation. 8e1+100m pdh can provide multi-interface of e1 and voice. The hardware adopts large scale fpga, collecting code, decoding, message insertion and alarm, and make the circuit simple so as to improve the reliability of the equipment. 438mm*150mm*44mm
Card reader Hot-swappable supported, compliant to usb 2.0 Supports all popular memory stick cards Led working indicator light Support win98 / 2000 / xp mac os v9.2 or higher
Fiber mode sm mm Type fc sc st fc sc st Diameter (mm) ¦0.9 ¦2.0 ¦3.0 End-face finishing pc upc apc pc upc pc Insertion loss (db) _0.20 _0.30 _0.20 _0.40 Return loss (db) 45 50 60 45 50 35 Exchangeability (db) _0.20 Repeatability (db) _0.10 Operating temperature(¦) -40 to +75 Storage temperature(¦) -40 to +85 Operating wavelength 1310, 1550 nm
LAN, RG, FO cables, Fusion splicers for FOC Utp and ftp cables for indoor and outdoor use. Outdoor cables with messenger; with jelly. Tv/sat cables - rg6, rg11, rg11 with messenger; rg59 with copper and ccs conductors. Active components - lan smart and regular switches; converters. Fusion splicers for fiber optical cables welding. Metal wires 6x7 3mm; 2 mm. Samples can be send over the post. Regular orders starting from a pallet till 20 or 40-foot containers.
PCI addon Card 1. PCI RS232 1/2/4/6 Port Card 2. PCI EPP Printer Card 3. PCI USB 2.0 Card 4. PCI IEEE 1394a Card 6. PCI ATA133/RAID Card 7. PCI SATA / RAID Card 8. PCI 5.1/7.1 Sound Card
Gigabit ethernet 8 port switch hub Features : - 8 x RJ-45 10/100/1000Base-T Port (Auto MDI-MDIX) - Full Duplex 1000 Mbit/s - Full and Half Duplex 10/100 Mbit/s - Supports auto-sensing for speed and duplex capability - Store-and-forward operation support - Performs full wire-speed switching with Head of Line (HOL) blocking prevention - Embedded 128K Byte SRAM for packet buffer - Support packet length up to 1522 bytes - Support 9K byte JUBMO packet - Integrated two-way Address-Lookup engine and table for 4K MAC addresses - Full-duplex IEEE 802.3x flow control - Half-duplex back pressure flow control - Smart flow control for mix-speed connection - 8-port Gigabit Layer 2 Switches 20 pcs per cartoon
Chipset : ATI Radeon 9200SE Memory : 128MB Ramdac : 350MHz D-Sub : Yes TV-Out : S-Out DVI : Yes Video In : Yes DirectX Version: 9.0 Features: Full support for AGP8X Standard doubles bandwidth for more engaging characters and enviroments, SMOOTHVISION Technology delivers the sharpest, clearest textures without sacrificing frame rates.
SMS Messenger for Desktop Messaging Send bulk SMS text messages from your PC to your global contacts
VoIP gateway SIP supported FXS/FXO Gateway
Data recovery card It can save money and time 1pc/box*30boxes/carton
Broadband voice router VOIP, internet access, VPN, firewall, DMZ, and printer server solution
The NT-300 is your stand-alone ISDN network termination (NT1) unit which provides the 2B1Q basic rate interface needed between the ISDN network line and the subscriber terminal equipment. You get two 64 Kbps B-channels for simultaneous voice/data transmission and one 16 Kbps D-channel for network signal transmission. Ideal for remote branch offices and home offices. The NT-300 unit also features an internal power supply enclosed in a compact and lightweight housing suitable for desktop or wall-mount installation. 104mm (W) x 159mm (D) x 60mm (H)
Router : Router with one 10 BaseT ethernet port and one synchronous serial port suitable for branch office routing or as internet access router
ICU - Used to set up E-business sites that handle SCM, CRM, logistics etc
Router Works well with all routers Lan (10baset) Wan ports (sync/async) No. Wan port (async rs232) 1 no. Console port (async rs232) Ip/ipx routing
Buddy Buddy card - Adds upto 4 users to P.C.
Description: Communication interfaces Ethernet Number : 2 Primary Ethernet interface Network interface : 10/100BASE-TX Ethernet / Fast Ethernet Data transfer rate : Up to 100 Mbps Distance between devices : Up to 100 m Protocols : Meggitt TCP/IP proprietary protocol for communication with the VM600 MPSx software, Modbus TCP and/or PROFINET Function : VM600 rack configuration and communications using the VM600 MPSx software, fieldbus Modbus TCP communications and/or fieldbus PROFINET communications
The safe decision. productnews The new communication modules enable the programming of the CPUs with ELOP II via Ethernet. These are used with the CPUs which are also new: F 8650X/F 8652X (safe CPU for H51q/H41q systems) F 8651X/F 8653X (non-safe CPU for H51q/H41q systems) The already existing communication modules F 8627 and F 8628 are still available in the product portfolio. Issue March 2006_Page 1/2 Applications/Accompanying products Part numbers/Delivery date F 8627X: 98 4862765 F 8628X: 98 4862865 Delivery date: immediately 2 new communication modules for H41q/H51q systems â?¢ F 8627X: Communication module for the protocols safeethernet and OPC DA via HIMA OPC server New: OPC A&E via HIMA OPC server, MODBUS-TCP slave and ELOP II programming via Ethernet (from ELOP II V. 4.1) Function Even more protocols! F8627X/F8628X Dimensions and weight â?¢ F 8628X: Communication module for the protocol Profibus DP slave New: ELOP II programming via Ethernet (from ELOP II V. 4.1) 19-inch module for H41q/H51q systems 3 height units (HU), 3 x 44.45 mm 4 width units (WU), 4 x 5.08 mm
