30W-ICS Repeater: Interference Cancellation System (ICS) Repeater is a personal network enhancement device with inbuilt Interference Cancellation System ICS Repeater system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
A DAS is a system of managed hubs and remote antennas that distributes a wireless signal to a series of connected indoor or outdoor multi-band, multi-technology radio heads. ... A main hub takes that signal, digitizes it, and distributes it to other hubs and radio heads via a high-bandwidth fiber optic network
Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction. Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc. Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots etc.
The RF front-end stage of the communication system is composed of passive devices such as a filter, a duplexer, a power combiner, an RF connector, and an RF switch. These passive devices are designed to maintain the possible linear characteristics in the operating range, but they have practically nonlinear characteristics. Passive intermodulation occurs when two or more different frequencies are used as inputs to a passive device having nonlinear characteristics. This phenomenon is called Passive IM (PIM). Intermodulation (PIM) signals are added as unwanted noise to an uplink band in a mobile communication system, which is a major noise source that deteriorates the signal to noise ratio (SNR). Therefore, the intermodulation (PIM) signal, which may cause a lot of losses in terms of operation, maintenance, and frequency use efficiency of the mobile communication system equipment, should be removed. A system for removing an intermodulation (PIM) signal existing in an uplink band of a mobile communication system is called a PICS (Passive Intermodulation Canceller System).
The Single Band LTE Repeater is a cell phone signal booster system made up of antennas, cable and a signal amplifier that takes an existing cell signal, typically found outside your home or office, amplifies the signal and then broadcasts it to an inside area that has a weak or no signal.In order for the system to work, there must be an existing, stable outside signal for the system to receive and amplify It can be applied at meeting rooms, conference rooms, museums, galleries, theaters, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
Dual Band LTE Repeater also known as cell phone repeaters were developed to address the two factors that cause poor cell phone reception. They're designed to amplify a weak outside signal and bypass any obstructions to provide a strong inside signal to an area that was originally lacking.The system works by mounting an outside antenna in a location that currently has signal, which is typically on the roof. The signal is passed from the outside antenna, by a cable to a signal amplifier inside the building. Once the signal is amplified, it is then sent to an inside antenna, where it is broadcast out to the area which needs better reception. The system also works in reverse, with the signal from your phone being amplified and broadcast back to the tower, ensuring strong, two-way communication.
Dual-Band LTE Repeater is used to improve network coverage of mobile phone in home and offices.Dual-Band LTE Repeater is a complete network coverage solution for areas which face problems like disturbance in call, call drops and less network signals. Dual-Band LTE Repeater is placed at a network rich area from where it catches signals from the nearest tower and these signals are transmitted to the area facing the signal problem.It can be applied at meeting rooms, conference rooms, museums, galleries, theaters, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security
5W-ICS Repeater: The 5W High Power 2G 3G 4G Cell Booster Long Distance ICS Repeater is designed to provide a more cost-effective solution than adding a new Base Transceiver Station (BTS) to improve signal coverage of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). The ICS Repeater (Interference Cancellation System) is a new kind of single-band RF repeater that can automatically detect and cancel the interference signals caused by oscillation of RF feedback between the Donor and Coverage Antennas in real time by adopting DSP (Digital Signal Processing) technology. It can continuously and stably cancel the interference signals and be adapted to any changes in the surrounding RF environment.
T-Bridge stands for "Telephone Line Communication", Which enables high speed data transmission through telephone cables. Besides Telephone cables, any types of copper cables such as coaxial cables, speaker cables, and UTP cables can be applied. T-bridge can save network construction cost dramatically as it can utilize existing copper cables already wired.
EMS solution monitors the status of server by using TCP/IP, SNMP, and ICMP protocols and by installing three applications (EMS agent, EMS server, and EMS monitoring) as well as sends an alarm by means of mail, SMS, and monitoring message according to user definitions in order to respond to server errors in a prompt manner. The solution aims at integrated management of various call center systems and network devices. These results re-gather their feedback on the target value is more accurate and valid gapeurosseo is utilized.
Module: Mobileeco ME-C21G (MDM9215/WTR1605L/PM8018) External Access: LTE/DC-HSPA+/HSUPA/HSDPA/WCDMA Air standard: LTE Release9, WCDMA Rel'99+/HSDPA Rel 5 Max output power: LTE: 23dBm 2.7dB RF technology: zero intermediate frequency Power: 5VDC +/- 10% Bettery: Li-ion 3.7V 2800mAh
Chipset: Qualcomm MDM9615 Max output power: LTE: 24dBm 3.84dB, CDMA: > +23dBm 3G/4G Standard: FDD LTE Release9, WCDMA Rel'99+ Band: B12 700MHz, GSM 850/1900 Power: AC Adapter 5.0VDC Max Current Consumption: Under 700mA@LTE 22dBm cat4 10MHz BW
Module: Mobileeco ME-C21G (MDM9215/WTR1605L/PM8018) External Access: LTE/DC-HSPA+/HSUPA/HSDPA/WCDMA Air standard: LTE Release9, WCDMA Rel'99+/HSDPA Rel 5 Max output power: LTE: 23dBm 2.7dB RF technology: zero intermediate frequency Power: 5VDC +/- 10% Bettery: Li-ion 3.7V 2800mAh
Chipset: Qualcomm MDM9615 Max output power: WCDMA: 24dBm 3.84dB CDMA: > +23dBm 3G/4G Standard: FDD LTE Release9, WCDMA Rel'99+ Band: B12 700MHz, GSM 850/1900 Power: AC Adapter 5.0VDC Max Current Consumption: Under 700mA@LTE 22dBm cat4 10MHz BW
This is a USB bluetooth dongle that enables your existing computer keyboard and mouse to use on your device such as a smartphone or tablet. User can easily switch from their keyboard and mice on a pc to their smartphone or tablet using a hot key. This brilliant device also supports multi paring. Up to four bluetooth devices can be controlled simultaneously with one dongle .It means that you don't need to buy another dongle in addition for use other devices. You can also copy texts from pc screen and paste them to your smartphone or tablet with the familiar method of Ctrl+C and Ctrl+V. MultiBlue Dongle is installed automatically by embedded software in the dongle without any driver CD. Only initial pairing is needed. To further add, It's especially useful at workplace. You don't need to grab a phone when you receive a phone message. Just leave the phone on a cradle and use your existing pc keyboard and mouse to reply to your phone message. Moreover, no one knows that you are chatting on smartphone with your friends or family while working. As you may know, typing on smartphone or tablet is really cumbersome. Typing error and slow typing speed often make us annoyed. For this reason, many people use a bluetooth keyboard. However, it's heavy and cumbersome to carry and expensive. Frequent charging is needed and it only supports one to one pairing. In addition, desk space would be small if you use additional keyboard besides your existing pc keyboard. MultiBlue Dongle can solve these problems completely. Just plug the dongle into usb port of any PC and you can work or enjoy on your smart device using your existing,full-size computer keyboard and mouse. Model Name BT-300KMS Size 48x18x5mm Color White System Window XP, Window 7, Mac OS X
This is a MultiBlue Dongle with usb mini sd card reader. If you put mini sd card into the dongle, it can be utilized as a usb memory other than using the function of existing MultiBlue Dongle. That is, MultiBlue Dongle Plus is a combination of Multiblue dongle and usb memory. Model Name BT-310KMS Size 48x18x5mm Color White System Window XP, Window 7, Mac OS X
Maximum wireless speed the linksys ea4500 offers wireless speeds for fast video and music streaming. Connect your computers, internet-ready tvs, game consoles, and other wi-fi devices at transfer rates up to 450 + 450 mbps speed for a premium home network experience. Superior wireless coverage built with leading 802.11n wireless technology, the linksys ea4500 offers maximum range to create a powerful wireless network. Full 3x3 mimo antenna array boosts signal strength to provide exceptional coverage and reliability so you can enjoy your wireless network from anywhere in your home. Gift pack
Juniper networks pb-4e1-rj48 hdlc 4 port e1 services pic new open boxnew open box 90 day warrantycables not includedmsrp $10, 000featuresproduct description: juniper networks physical interface card - expansion module - 4 portsform factor: plug - in moduleports qty: 4 portsdata link protocol: hdlc, frame relay, pppdata transfer rate: 2.048 mbpsline rate: e-1connectivity: wiredline coding formate:
Description Secure services gateway 20 with 2 port mini-pim slots, 256 mb memory Firewall perf (large packets) 160 mbps Firewall performance (imix) 90 mbps Firewall packets per second 30, 000 pps 3des+sha-1 vpn perf 40 mbps Concurrent vpn tunnels 25/40* Gift pack
