#304 stainless access control system drop-arm turnstile, crowd control drop arm turnstile operates in a fast, durable, smooth way with low power consumption Access control system drop-arm turnstile JDYZZ-2 is made of high quality stainless sheet and designed with intuitive colored LED lights guiding users from entry through the authorization and onto the secured side, providing a fast, durable, smooth way with low noise and low power consumption. By using an array of optical sensors to determine the number and direction of persons passing through the security turnstile lane, it efficiently controlles pedestrian access between public and secure areas, and the passage Is released for free access upon receiption of a valid open signal and closed automatically affter passage. The unauthorized person attempts to tailgate on a valid entry, or entry without authorization will be recognized and trigger sound alarm. Access control system drop-arm turnstile JDYZZ-2 is an efficient crowd control solution with the combination of a high bidirectional flow of passage with medium levels of security, effectively organizing passageways with increased requirements for design and comfort of passage. Finally, crowd control drop arm turnstile JDYZZ-2 provides single directional and bi-directional entry control, and automatically release the passage for free access in case of power failure or emergency. Access Control System Drop Arm Turnstile Featurers 1. Visual graphics provide guidance to users 2. Superior unauthorized passage detection 3. Virtually maintenance free 4. Integrates easily with access control systems 5. Supports rapid throughput 6. Multiple operational modes including controlled passage, free passage and visitor 7. Quick and smooth motorized drop arm for bi-directional operation. 8. LED end displays indicate direction status 9. Provides a clear path for the user as they navigate the passage 10. Assures that only one person enters for each authorized credential Access Control System Drop Arm Turnstile Applications Offices Banks Public institutions Data centres Commercial office buildings Government agencies Access Control System Drop Arm Turnstile Parameters Housing Material: #304 stainless sheet Dimension: 1200 x 165 x 1000mm Power Supply : AC220V / AC110V, 50/ 60 Hz Lane Width : 600mm Drive Motor: DC 24V brush motor Pass Speed : 40 persons per minute Input Interface: Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction: Bi-directional Communication Interface: RS485 Rest Time after Power On: 3 seconds Open Time: 0.2 second Life Cycle: 3 million times Working Temperature: -30�°C~+70�°C Working Environments : Indoor, outdoor (with shelter)
2022 latest Waist height tripod turnstile gate, waist height pedestrian tripod turnstile with 2- year warranty from Chinese tripod turnstile manufacturer & supplier Waist height tripod turnstile gate JDGD-27 is one of our morden- look crowd control solutions for securing entrances with high pedestrian flow, which is reliable, convinient and easy to use, and compatible with any validation system on the market (biometrics, fingerprints, QR scaner, facial recognition). The LED notification lights are fixed onto both end to give notice of presented credential status to pedestrians, and any intrusion and tailgating attempts will activate alarm. The advanced positioning technology is used to precisely control the movement position, ensuring the Waist high turnstiles run more accurately and stably. As an idea crowd control solution, the waist height pedestrian tripod turnstile JDGD-27 is suitable for any applications requiring effecitive crowd management such as office buidings, administrative buildings, athletic facilities, university facilities. In addition, in case of emergency or power failure, the horizontal arm will collapse to allow a clear passage. Waist Height Tripod Turnstile Gate Features 1. Integration possible with virtually any access solution 2. Field configurable for single direction or bi-directional operation 3. Regulates the flow of people with ease, even during the busiest periods of the day 4. Safe, controlled rotation and self-centering arm rotation 5. Free egress in emergencies or loss of power 6. The passing time can be freely set, and it will be locked immediately after the predetermined time. 7. Easy installation on finished floor surfaces, optional on unfinished surfaces 8. Extremely versatile operational features 9. functional, quick and space-saving 10.Easy, safe and fast to use Waist Height Tripod Turnstile Gate Applications Athletic facilities Cafeterias Amusement parks Stadiums Office buildings Residential area Fitness center Waist Height Tripod Turnstile Gate Parameters Housing Materia: 304 stainless sheet Dimension: 1400 x 280 x 980mm Power Supply: AC220V / AC110V, 50/ 60 Hz Channel Width: 550mm Arm Turning Angle : 120�° Pass Speed: 35~40 persons per minute Input signal optional: Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction: Bi-directional Communication interface: RS485 Arm drop when power failure: Yes Open Time: 0.2 second Life Cycle: 5 million times Working Temperature: -30�°C~+70�°C Working Environments: Indoor, outdoor Package: export standard carton
2022 latest swing barrier gate turnstile, swing barrier optical turnstile is designed with upscale look suitable for any premium lobby Swing barrier gate turnstile JDBZ-28 adopts reliable advanced brushless DC motor ensuring stable operation with low noise, and DC dynamic coding control technology for guranting silent control and turnstile stability in variable speed movement. Swing barrier gate turnstile JDBZ-28 offers multiple operational modes including controlled passage, free passage and visitor, by which pedestrian traffic will be efficiently managed in different situations. The conbination of a fast throughput, superior barrier deterrence and optical tailgate detection enables swing barrier turnstile JDBZ-28 compatible with any upscale business or institutional environment. Swing barrier gate turnstile JDBZ-28 offeres bi-directional entry control in conjunction with access control device with dry contact output, and automatically open to release the passage for free access in case of power failure or in an emergency. Becausee of its elegent and stylish design as well as fast throughput, automaticl swing turnstile JDBZ-28 is used widely to various applications such as company foyers, data centers, government buildings and fitness centers. Swing Barrier Gate Turnstile Features 1. Smooth and fast opening of barriers 2. Solution for disabled and trolley access 3. Free egress in emergencies or loss of power 4. Quick and precise panel movement and alignment 5. Motorized panels open quickly and smoothly away from the user 6. Slim cabinet allows optical turnstile use in compact spaces 7. Upscale look suitable for any premium lobby 8. Run more smoothly and stop quickly after being blocked 9. Streamlined design with a more modern aesthetic 10. Adopt more reasonable electric control and layout to improve the protection level Swing Barrier Gate Turnstile Applications Subway Large venues Stadium Commercial buildings Fitness center Swing Barrier Gate Turnstile Parameters Housing Material: #304 stainless sheet Dimension: 1400 x 200 x 980mm Power Supply : AC220V / AC110V, 50/ 60 Hz Channel Width: 600~900mm Drive Motor: DC 24V brushless motor Pass Speed: 30 ~35 persons per minute Input Interface: Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction: Bi-directional Communication interface: RS485 Gate open when power failure: Yes Open Time: 0.2 second Life Cycle: 3 million times Working Temperature: -30�°C~+70�°C Working Environments: Indoor, outdoor (with shelter)
Unique design optical flap turnstile, automatic flap gate turnstile is ideal crowd control solution with low power consumption Optical flap turnstile JDYZ-27 provides a fast and smooth way to facilitate the authorized people entry secured areas and suites well the applications requiring ultra high speed access and medium levels of security. Flap barrier optical turnstile JDYZ-27 is supplied with intelligent infrared sensors providing high detection accuracy to effectively prevent clipping and collision, ensuring the safety of pedestrians. If a person attempts to enter without authorization, a visual or audible alert is triggered, meanwhile, optical flap turnstile gate JDYZ-27 will refuse to open along with the alerts to effectively deny access. Optical flap turnstilee JDYZ-27 supports single directional or bi-directional access and flexible integrate various access contro device with dry contact output. In addition, flap optical turnstile JDYZ-27 will cancle the access right If pedestrians do not pass through within pre-defined time, and the passing time Is adjustable for different requirements. In case of power failure, the passage will be released automatically for a free access. Optical Flap Turnstile Features 1. Easily integrates to access control and fire safety systems through dry contact 2. Forcibly enter or tailgating attempts will be prompted by audible & visible alerts 3. High performance and robustness 4. Unique design meets the latest architectural trends 5. Physical security improved with fast double retractable wings for immediate lane closure 6. Quick and smooth motorized retractable wings for bi-directional operation 7. Fast user throughput 8. In case of emergency, the flap turnstile arm will open automatically to allow free access 9. Obstacles automatically open to free the passage 10. Stable and efficient operation with lower noise Optical Flap Turnstile Applications Company premises Power plants Industrial plants Government facilities Stadiums Airport and port areas Public transportation terminals Optical Flap Turnstile Parameters Housing Material: #304 stainless sheet Dimension : 1400 x 300 x 980mm Power Supply: AC220V / AC110V, 50/ 60 Hz Channel Width: 550mm Drive Motor : DC 24V brush motor Pass Speed : 35~40 persons per minute Input signal optional: Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction: Bi-directional Communication interface: RS485 Arm drop when power failure: Yes Open Time : 0.2 second Life Cycle: 3 million times Working Temperature: -30�°C~+70�°C Working Environments: Indoor, outdoor (with shelter)
2022 latest design speed turnstile gate, speed gate security turnstile is designed minimal footprint for maximum throughput Speed turnstile gate JDSG-27 is sturdy, durable and high-intensity impact resistent, designed with a slim and stylish look for narrow entry areas where autonomous entry and aesthetics are important. Speed gate turnstile JDSG-27 runs in a smooth, fast and reliable way, providing an ideal contactless solution for access control and comfortable passage in an intense flow of people, avoiding queues at the entrance and exit. The standard (600mm) and wide (900mm) lane widths are available to meet different application requirements, and the height of tempered glass panels 1.0m, 1.2m or 1.8m are available to provide increasing levels of security as required. Speed turnstile gate JDSG-27 can be configured to allow access in a single direction or bi-directionally depending on actual requirements and simply integrates various access control systems to support muliple verification methods. In addition, speed gate security turnstile JDSG-27 is designed in compliance with the most stringent safety and security standards, and widely used in corporate lobbies, high rise building entrances, luxury apartment complexes, universities. Speed Turnstile Gate Featurers 1. Accurate tailgating detection 2. Precision controlled movement of obstacles and detection of all obstructions 3. Reinforced detection to enhance user protection and manage passage of luggage 4. Obstacles automatically open to free the passage in case of power failure 5. Minimal footprint for maximum throughput 6. Unique detection algorithm prevents fraudulent entry with greater user safety 7. Smooth integration of proximity, magnetic card readers, biometric scanners and other user authentication systems 8. Transparent and elegant design 9. High-density matrix of infrared beams follows usersâ?? progression through the gate 10.The swing panels are available in heights of 1.2m, 1.4m or 1.8m to provide increasing levels of security as required. Speed Turnstile Gate Applicationsã?? Offices Banks Public institutions Data centres Sensitive sites Schools and universities Speed Turnstile Gate Parameters Housing Material : #304 stainless sheet Dimension: 1400 x 160 x 980mm Power Supply: AC220V / AC110V, 50/ 60 Hz Channel Width: 600~900mm Drive Motor: DC 24V brushless motor or servo motor Pass Speed: 35 ~45 persons per minute Input Interface: Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction: Bi-directional Communication interface: RS485 Gate open when power failure: Yes Open Time : 0.2 second Life Cycle: 5 million times Working Temperature : -30C~+70C Working Environments : Indoor, outdoor (with shelter)
Full-height optical turnstile, electric full height turnstile gate, full height rotor turnstile provides effective crowd control solution with high security Full height optical turnstile JDFHT-9 is a full-height security solution to mitigate tailgating and handle moderate throughput by controlling access to various facilities and enclosures, any illegal intrusion or tailgating attempts will activate a alarm, which supports anti-collision function by which access control turnstile will be locked automatically when the opening signal is not received. Optical full height turnstile JDFHT-9 is easy to use and maintenance, and automatically detect whether the gate is in the initial position. Full height optical turnstile JDFHT-9 is available in both one-way and two-way access control, and supports automatic reset function. After opening the gate, the automatic full height turnstile will automatically cancel the access rights of pedestrians when they do not pass within the specified time. In addition, the passage will be released for free passing in case of power failure or emergency. Full Height Optical Turnstile Features 1. Available in both one-way and two-way access control 2. Easily integrates with almost any access control system 3. Free access under power failure 4. Easy, safe and fast to use 5. Easy installation and field-configurable 6. Easily change turnstile passage mode 7. Durable construction suitable for outdoor use in all weather conditions 8. Automatic self-centering prevents over or under travel of rotating section 9. Full height for maximum security 10. Free egress in emergencies or loss of power Full Height Optical Turnstile Applications Industrial plants Company premises Power plants Parking sites Bike parks Military installations Full Height Optical Turnstile Parameters Housing Material : #304 stainless sheet Dimension: 2400 x 1350 x 2880mm Power Supply: AC220V / AC110V, 50/ 60 Hz Channel Width: 600mm IP Rate: IP45 Pass Speed: 30 ~35 persons per minute Input Interface: Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction: Bi-directional Communication interface: RS485 Gate open when power failure: Yes Open Time: 0.2 second Life Cycl: 5 million times Working Temperature: -30C~+70C, Relative Humidity: 90%, no condensation Working Environments: Indoor, outdoor (with shelter)
Unique design sliding turnstile gate, sliding turnstile barrier gate, optical sliding turnstile is an effecient contactless crowd control solution for upscale applications Sliding turnstile gate JDPYZ-10 operates in a fast, accurate, stable and quiet way with low-power consumption, and a longer service life, which comes with a high transparent glass baffles (Max 1.8 meters), effectively preventing people from crawling or climing over, and designed with stylish apperance blending into the aesthetics of the sorrounding interior. Becausee of the unique design and rapid throughput, it is an effecient contactless crowd control solution for upscale corporate lobbies, high rise building entrances, luxury apartment complexes, universities, and anywhere autonomous entry and aesthetics are important. Sliding turnstile gate JDPYZ-10 monitors the pedestrians passing through the automatic turnstile lanes by photocells, which detect the direction and prevent closure as long as a pedestian or object Is within the secured area. In addition, optical sliding turnstile gate JDPYZ-10 will be closed automatically after the passage is cleared, and the tailgating attempts or entry without authorization will be dectected and trigger an alarm singnal, and it will open to provide free passage in the event of power failure or in an emergency Sliding Turnstile Gate Features 1. Intuitive approach detection 2. Precision controlled tempered glass obstacles 3. Designed in compliance with the most stringent safety and security standards 4. In case of emergency the obstacles can be unlocked with a simple push to automatically open 5. Electro-mechanical locking to withstand forced entry attempts 6. Glass obstacles up to 1800mm without or with straight or sloping overhang 7. Silent and smooth in operation 8. Unique detection algorithm prevents fraudulent entry with greater user safety 9. Unique detection system accurately tracks the passage of a single authorised user 10. Stylish and flexible design able to virtually blend infinite aesthetics within architectural interior needs Sliding Turnstile Gate Applications Offices Banks Public institutions Data centres Sensitive sites Schools and universities Sliding Turnstile Gate Parameters Housing Material: #304 stainless sheet Dimensio: 1400 x 350 x 980mm Power Supply: AC220V / AC110V, 50/ 60 Hz Lane Width: 500mm~550mm Drive Moto: 35 persons per minute Input Interface: Dry contact signal or +12V level signal or DC12V pulse signal Rotating Direction: Bi-directional Communication Interface: RS485 Rest Time after Power On: 3 seconds Open Time: 1 second Life Cycle: 3 million times Working Temperature : -30�°C~+70�°C Working Environments : Indoor, outdoor (with shelter)
The main advantages of Macrosafe three roller gates are: (1) In case of emergency, the power will automatically drop the pole to quickly clear the pedestrians at high density to ensure the safety of pedestrians; (2) Power off function; (3) Support statistics and display the number of passersby; (4) Support remote control and management; (5) Mechanical structure, no gear, no belt drive, low noise; (6) Support IC card recognition, QR code recognition, second-generation ID card recognition, fingerprint recognition, face recognition, etc. (7) Low failure rate, non-polluting materials, easy maintenance and long service life; Compared with other turnstiles, tripod turnstile has better anti-trailing function. The space between each roller of the three-roller gate has been scientifically designed, so that only one person can pass through at a time, preventing the occurrence of pinching and other situations, and having better passenger flow management capabilities. Macrosafe has strong R&D and production capabilities, intelligent pedestrian access gates such as access gates, wing gates, swing gates, three-roller gates, and speed gates. The products are mainly used in intelligent information control places such as airports high-speed railways, subways, convention and exhibition centers, communities, office buildings, units, factories, scenic spots, hospitals, etc., to improve access management efficiency with a safer, smarter and more stable access control management system. Save labor costs and make the entrance and exit an efficient, orderly and controlled safe public place.
During the use of the face recognition speed gate gate, when pedestrians pass through the passage, the face recognition high-definition camera will extract the face information data of the entrance and exit, and compare the face data information in the system database, such as the facial recognition ratio. If it is correct, the system will send the gate opening signal to the gate and release the gate. If the comparison is not correct, the gate will not open, and a voice alarm will be issued. If there is a visitor from outside, and the face data information of the visitor is not stored in the database, you can swipe the card (or swipe the temporary visitor card) to open the gate of the pedestrian passage. At the same time, the face recognition speed The high-definition camera of Tongmen Pickup will archive the acquired face recognition information data of the visitors in the database for search and follow-up later. If a pedestrian forcibly passes through the pedestrian passage, the Macrosafe intelligent face recognition speed gate gate system will intelligently lock the gate shutter and give a voice alarm. System features of face recognition speed gate gate 1. Use face recognition speed gate gates to identify people's identity information faster and better 2. Use face recognition speed gate gates to make the property community more secure 3. The face recognition channel system can help companies easily achieve attendance
"We are India Based Multifaceted Company Working in the Field of CCTV Cameras, Fire Alarm Systems, Access Control System.
SENSOR AR0330 Sensor Size 1/3 Resolution 2204x1296 Pixcel Size 2.2um x2.2umm Lens Structure 5G F/NO 2.1mm FOV 178 Distortion
Pixel Array/Resolution :1920x1080 8 megapixel Optical Format :1/2.9inch Package Size :36*32*19.3mmF/NO: 2.0+/-5%TV Distortion: < 31%FOV: 133 SENSOR Features: HDR ISP image saturation, chroma, contrast adjustment ISP image image edge sharpening
Chip type: push type Pixel area: 160 x36 pixels Resolution: 508DPI Sampling accuracy: 10 bit Interface protocol: SPI FRR:
Aneiz T10 Tripod turnstile-Support OEM and ODM. Support third-party biometric devices, such as fingerprint scanner, face recognition camera. RFID card reader, QR code scanner. Aneiz T10 Tripod turnstile is a high performance pedestrian control turnstile. Usually used in high pedestrian traffic flow in both directions to control pedestrian entry or exit in restricted areas 304 Stainless steel material, durable, high quality, for long lasting use. The T10 features designed with standard relay signal, which can integrate easily to any kind of access control and fire systems through I/O (dry contact). In case of emergency, when power goes off both directions are free. Passing Direction: Single directional / Bi-directional. FEATURES Aneiz T10 Tripod turnstile -Compatible with any access control systems. Aneiz T10 Tripod turnstile -304 Stainless steel material, durable, high quality, for long lasting use. Aneiz T10 Tripod turnstile - Reset automatically: the gate arm will lock if not passing at preset time (5 seconds), the time can be adjusted by software. Aneiz T10 Tripod turnstile - Rapid throughput, 35 to 40 people per minute. Aneiz T10 Tripod turnstile - Passing direction: single directional / bi-directional, both the two directions can be switched or set as free mode. LED indicator on the top displays the status of passing. Aneiz T10 Tripod turnstile -Multiple Operating Modes-optional IC/ID card, key fob, QR/bar code, face / fingerprint / finger vein biometric recognition, push button, ESD, wireless remote control, insert coins / card / wristband, digit counter... Aneiz T10 Tripod turnstile TECHINCAL SPECIFICATION Material 304 Grade Stainless Steel Dimension 330(L) X 420(W) X 990(H)mm Arm Length 500mm Passage Width 550mm standard lane Throughput 35 to 40 people per minute Response Time â?¤0.3S Net Weight 35Kg/pcs Directional Mode Uni-directional or bio-directional Emergency Function Arm release automatically for Emergency access Power Supply AC220V/110V, 50/60Hz Power Voltage 24V DC Power Consumption 20W MCBF 5 Million Operating Temperature -20 �°C - 75 �°C Operating Environment Indoor or outdoor use Relative Humidity 90% LED Indicators Red cross means gate open, Green arrow means gate closed Warranty: 18 Months
The ESD anti-static gate is mainly to test whether the anti-static shoes and wrist straps of employees are qualified, but in order to ensure that everyone must do an anti-static test before entering the dust-free car and can enter the workshop after passing the test, so it will be in front of the workshop. Install ESD anti-static access control gate, which not only detects the static resistance value, but also saves the resistance value record of each employees.
A flap barrier works with a fare collection system for public services where entry is strictly for paid visitors. The barrier controls the human traffic allowing only paid entries. The flaps open only when the visitors produce tickets to the service. Found in Metro/Bus stations, the flap barriers provide real help in controlling human movement. Improves security at busy public service stations Integrated with access control device Collects fare through an electronic system Works automatically â?? flap opens only for a certain time Strengthens the fare collection system Ensures disciplinedhuman traffic movement Requires no physical monitoring Works on a DC motor Energy efficient
A tripod barrier is an access control device suitable for use in the entrance/reception area of a public place including banks, administrative establishments, industrial installations and other high footfall areas. It allows visitors to pass through the gate in a hassle-free manner while providing sufficient time for security checkup. Ensure smooth flow of visitors even in rush hour Helps in strengthening physical security of the establishment Keeps the reception staff free from uncontrolled access Works with low sound and has a little mechanical impact Alarm for invalid entry Collapsible bars for emergency exit Suitable for finished and unfinished surfaces Available in single and bi-directions
Tactical Military Swagger Stick
Dependable fingerprint capture for your most demanding requirements. The Aratek A600 Fingerprint Scanner uses superior biometrics technology that combines advanced features with ease of use. Its FBI PIV Mobile ID FAP 20 certification is your guarantee of high quality, usability, and inter-operability. The Aratek A600 is compliant with international standards including ISO and ANSI and is engineered to deliver consistently excellent results in various applications across different industries such as finance, health care, hospitality etc. Features FBI Certified PIV Specification, Mobile ID FAP 20 - International Standard ISO19794-2, ISO19794-4, ANSI 378, ANSI 381 and WSQ supported - High Image Quality Optical fingerprint technology with superior image quality - Strong Adaption Good adaption for dry, moist and rough fingerprints - Correction and Authentication Support auto correction and 360 degree rotation authentication - Cloud Platform Seamlessly join in Aratek TrustLinkTM biometrics authentication platform - OS Support Windows2000, XP, Vista, Windows 7 / 8 / 10, Android and other embedded systems - SDK Comprehensive software development kit is available for development and integration Dimension : 98.9*61.5*35.7mm (L*W*H) Capture Mode : Optical Touch Platen Size : 16.0*21.0 mm Sensing Area : 15.24*20.32 mm Fingerprint Image Size : 300*400 pixels Image Resolution : 500 dpi Gray level : 256 level Fingerprint Image Distortion : 2% Work Voltage : 5.0 V (USB power supply) Work Current : 200 mAh Supported OS : Windows XP / 7 / 8 / 10, Android, Linux
Major features and benefit: Futronic's FS80H USB2.0 Fingerprint Scanner uses advanced CMOS sensor technology and precise optical system to deliver high quality fingerprint image. It can capture an almost un-distorted raw fingerprint image into PC in 100ms. So it is good for any fingerprint recognition application. Its finger scanning window is a crown glass with a thickness of 14mm. So it is much more reliable and robust compared to any semiconductor type fingerprint sensor. The finger is illuminated by 4 infra-red LEDs during scanning and the light intensity is automatically adjusted according to scanning fingerprint's characteristics (wet, dry, blurred, etc) to optimize the quality of the captured fingerprint image. Special electronic circuit is built into FS80H to do Live Finger Detection (LFD). That is, with appropriate software in PC, user can select this LFD feature so that only live finger's fingerprint will be scanned into PC. Fake fingers made from silicone rubber, play-doh, etc, will be rejected. And the LFD feature is included in all Futronic's standard software. Specification : - Fingerprint scanning window size is 16x24mm - Image resolution is 320x480 pixel, 500 DPI - Image format is 8 bit 256 grayscale. - Raw fingerprint image file size is 150K byte - With Live Finger Detection (LFD) feature - USB 2.0 compatible interface, plug and play device. WHQL approved for Vista 32&64 bit. - With a 2M standard USB cable ï?? Small size, 64 x 48 x 27 mm - Light weight, 120g - Operation temperature: -10 to +55 C Electrical characteristics - Light source: Infrared LED - Supply voltage: DC 4.5-5.5V via USB port - Power consumption: - Active
