Weight nw: 25, 300 kg Max. Load: 9500 kg Front bridge load: 11, 800 kg no-load Rear bridge load: 13, 500 kg no-load Front bridge load: 26, 595 kg full load Rear bridge load: 8205 kg full load Operation ability Max. Speed Full load, advance / retreat, flat road Gear 1: 4.0 km / h Gear 2: 8.3 km / h Gear 3: 15.4 km / h Gear 4: 25.0 km / h Max. Slope (load): 25% Max. Traction: 227 kn Engine Manufacturer: deutz, germany Model: f10l413fw Manner: 2 stage combustion air-cooling engine Power: 170 kw Intake system: dry air filter-press Exhaust system: catalytic exhaust purification and mufflers Brake Braking system: work / hydraulic parking brake system integration With the lifting handle Brake work: Design: multiple disk external liquid cooling hydraulic operation Brake pressure: 110-150 bar Parking brake / emergency brake Design: spring brake hydraulic brake released four security Driving system Torque converter Manufacturer: dana, the united states Model: series8000 Design: single-industrial-type hydraulic auxiliary drive system Gear-box Manufacturer: dana, the united states Model: series32000 Design: power gear-shift, 4 forward gears and 4 backward gears Drive bridge Front bridge Model: d102 Manufacturer: germany kessler (kessler) Rear bridge Manufacturer: kessler, germany Model: d102 Design: with ordinary differential speed
Weight nw: 12500 kg Max. Load: 4000 kg Front bridge load: 5625 kg no-load Rear bridge load: 6875 kg no-load Operation ability Max. Speed Full load, forward / backward, flat road Gear 1: 3.6 km / h Gear 2: 7.6 km / h Gear 3: 12.5 km / h Gear 4: 20 km / h Max. Slope (full load): 14% Max. Traction: 104 kn Engine Manufacturer: deutz, germany Model: f6l912fw Manner: 2 stage combustion air-cooling engine Power: 63 kw Intake system: dry air filter-press Exhaust system: catalytic exhaust purification and mufflers Brake Design: multiple disk external liquid cooling hydraulic operation Brake pressure: 110-138 bar Parking brake / emergency brake Design: spring brake hydraulic release Hydraulic system Designed to use imported hydraulic valve, eg. Bosch, rexroth, fk506, suodan, bishimokewobaike Driving system Torque converter Manufacturer: dana, the united states Model: c272 Design: single-industrial-type auxiliary drive hydraulic system Gear-box Manufacturer: dana, the united states Model: r28421 Design: power gear-shift 4 forward gears and 4 backward gears Drive bridge: meichi, xuzhou Model: q150 Design: no-spin slide proof self-locking differential speed for front bridge, ordinary differential speed for rear bridge
Raymond mill is suitable for grinding the nonflammable and nonexplosive materials with humidity below 6 % and mohs hardness less than 7, such as barite, calcite, feldspar, limestone, marole, glass and so on.Model:3r2615 max.Charge granularity(mm):20 discharge granularity(mm):0.125-0.044 shift output(t):2-25 central shaft velocity(r/min):165 inner diameter of the ring(mm):780 diameter of the roller(mm):260 motor of main machine(kw):y225s-8-18.5
It is developed by our engineers through many years' hard work on the basis of rich experience of industrial mills.It is mainly used in super powder processing with more than 500 kinds of materials such as feldpar,talcum,barite,marble,limestone.charcoal blacks and china clay,with output fineness of 500 meshes(25um) to 2500 meshes(5um) and the finest powder can be 3500 meshes(3.55um).Model:7826 No.of Roller(piece):3 Diameter of Roller(mm):260 Inside Dia of Ring(mm):780 Speed of Main Frame(r/min):160 Max.Feed Size(mm):20 Capacity(t/h):25-500 Motor Model of Main Frame and Power(kw):Y225S-8-18.5 Total Power(kw):45 Diamension L*W*H:4.1*4.2*5.1 Weight(t):4.8 Output Size(mm):500 mesh(0.25)-1250 mesh(0.01),the finest 2500 mesh(0.005)
Ball mill is the main part of grinding system, which is essential in the cement production. Our company is qualified to supply kinds of large ball mills for production line. All kinds of central drive, side drive, central discharge, slide-shoe bearing mill that can help you to produce qualified cement are in our range. The ball mill can be widely used in cement production, metallurgical, chemical industry and etc. Specification (Diameter*Width) (m) Rotating speed (r/min) Feed size (mm) Capacity (t/h) Load of grinding part Raw material Cement 1.83x7 23.9
This equipment uses biserial and centripetal spherical rod mandrel which can automatically adjust. The operation resistance of the equipment is extremely small, so its energy-saving effect is Significant. A section of Cone Cylinder is added to the original cylinder, which not only enlarges the effective volume the mill, but also makes the media inside the cylinder distribute more reasonably. It is widely used for grinding materials in the mineral dressing plant of non-ferrous metals and ferrous metals, as well as the Chemical and building materials lines.
The machine is mainly applied to the powder processing of mineral products in the industries of metallurgy, construction materials, chemical, and mining, etc. it can produce powder from various non-flammable and non-explosive mineral materials with Mohs hardness below 9.3 and humidity below 6%, such as quartz, feldspar, calcite, talcum, barite, fluoride, Xircom, cinder, white lime, cement clinker, activated carbon, dolomite, granite, soft coal, coking coal, lignite, magnesia, chromium oxide green, gold ore, red clay, clay, kaolin, coke, coal Gangue, porcelain clay, kyanite, fluorspar, bentonite, medicinal stone liparite, diabase, pyrophyllite, shale red stone, emeraldite, basalt, gypsum, graphite, carborundun, heat insulating material, etc.
Hammer Crusher is widely used in mining, cement, coal, metallurgic, construction material, road building, and Petroleum & Chemical industries. It is used for grinding the medium-hard materials. The material will be grinded by the striking between high-speed hammer and material. It possesses qualities of simple structure, large reduction ratio, and high-efficiency. Both Dry and Wet Process are available. Hammer Crusher Operating principle: The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.
Mine selection machine.
Spirals are gravity concentrators and separate minerals of different specific gravity according to their relative movement in response to gravity, centrifugal force and other forces in the fluid medium. It has extremely good performance and effects in processing placer of beach, riverside, seashore and stream. í¦Gandongí¦ Spirals are made of polyurethane lined fiber glass with wearable corundum inner surface. Generally there are 5 turns in one start, single, twin, triple and quad starts available per column to suit capacity requirements. Application Rutile, ilmenite and zircon concentration Iron ore, chromite and manganese beneficiation Tin, tantalum and ore concentration Gold, native copper and base metal recovery Silica sands processing Titano-magnetite concentration Feature & Benefits Reasonable structure and small occupation area High recovery, high efficiency, and precise separation, Light in weight, rust and corrosion resistant; Simple installation and Minimal maintenance requirements Low operating cost and long operating life Reliable running with minimal operator attention Strong adaptability to fluctuation of feeding amount, density, size and grade.
Jigging machine belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. Gandong saw-tooth wave jig is mainly consist of three parts: main frame, driving set and jigging chamber. Application Jigging machine is widely used in gravity concentration of tin, tungsten, placer gold, hematite ore, manganese, titanium, antimony, lead, tantalum, niobium and other minerals. Features The pulsing curve of the traditional jig is sinusoidal waveform, the up and down speed of water flow and acting time produced by the movement of membrane are almost same, so it is unfavorable to loose of jig bed and layering of minerals based on special gravity, and thus affect separation ability and recovery rate. Saw-tooth wave is energy economy gravity equipment that is developed and improved from traditional jig on the basis theory of jig bed layering. Its jigging pulsating curve is similar to saw-tooth wave, which makes the up speed of water flow quicker than down speed of water flow, so it can improve looseness of jig bed and reduce suction action, which can lead to fully settlement of heavy particles in slurry, it highly improves separation ability and recovery rate. Stroke and frequency of stroke are adjustable.
Application of shaking table Concentrating Tables are designed to wet gravity-based separation of minerals and other granular materials. There are many applications where the concentrating table is of particular value and cannot be equaled for economical and efficient performance. They are effective in processing precious and base metal, rare metal and non-metallic minerals. Construction Head Motion: The head motion is of rugged construction and requires minimum maintenance. Its internal mechanism is splash lubricated from an integral oil sump. Decks: The decks are built of 16 mm zircon-reinforced fiberglass with fabricated steel frames at the bottom and are easy to clean, requiring little maintenance. The specific gravity of fiberglass made into decks is one third of that of steel, while its strength reaches as high as 70% that of steel. This fiberglass desks also has the characteristic of water-resistance and corrosion-resistance and can hold the shape unchangeable at f+50f¦. Feed and Water Box: A wooden feed distributing box with hopper and a long water box are attached to the iron of the deck, giving a very even distribution of feed and water. Base: A choice of ordinary type, groove steel support or big channel steel support is available. Technical Specification The Gandong Shaking Tables have three distinct deck designs available. The course ore deck is designed for recovering particles sized from 0.5 mm to 2 mm; the fine sand deck is designed for recovering fine particles in the range of 0.074 mm to 0.5 mm; the slime deck is designed for recovering super extremely fine particles in the range of 0.05 mm to 0.074 mm.
Concentrator is kind centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings. Three models are available. Application shows that the recovery can be as high as 99%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of í¬0. 074mm, the recovery for the natural gold is expected up to 98%. For that natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours, and the upgrade ratio is up to 1,000 times. The equipment is patented in China.
Vibration screen is vibrated by the circling motion. The screening line of material is long and has a lot of sieve specification. The screen of every shelf specification is clear, and it adopts the style of the barrel to surge. It had the characteristics of reliable structure, strong vibrating strength, low noise in vibration, easy maintenance, safety operation and it is widely used in mining, building materials, traffic energy, chemical industry, etc.
CTDG Dry Magnetic Separator is a new type high-efficiency magnetic preseparation equipment for materials with big size, such as lump iron ore,mill sales and other ferrous metals.
MAS Baiyun CTB Wet Drum Separator is newly developed iron ore concentrating equipment under wet condition.It has been designed by engineers having a wealth of knowledge and data, gained over many years of Wet Drum applications and experience. This kind of magnetic separator can prevent the final product from the secondary contamination because of the washing action adopted in the processing. It is equipped with a respective spray pipe for feed and concentrates, and water amount can be adjusted so as to assure suitable density of the concentrate. It can be equipped with cocurrent, counter-rotation and counter current tanks, and equipped double drums or three drums according to requirements of customers.
MAS Baiyun YCMC wet pulse magnetic separator is a new and high efficiency wet drum magnetic separator with patent. It has advanced structure, particular separating principle, permanent magnet, pulse magnetic field through improving the magnetic system, magnetic intensity, the tank design ect. So this kind of equipment has higher separation rate and more suitable for concentration of strong magnetic material. Increase the grade of concentrates greatly.
MAS Baiyun NCT -magnetic separators are newly developed strong wet magnetic separator for adjustment of magnetic mineral density in upstream and downstream operation stages of magnetic separation plants.
MAS Baiyun YC dry drum magnetic separator can attract dry magnetic powder from the non-magnetic materials continuously and automatically. The unique design for magnetic circuit and the magnetic source is made up from the NdFeb with high performance. Featuring with powerful magnetic force and high efficiency for tramp iron-elimination, it can be widely arranged in the lines such as grinding,fire-proofmaterial,foodstuff,feed,buildingmaterial,ceramics,raw material for glass, renewable rubber powder, PVC powder, quartz sand,and chemical industry and so on. Feeding capacity can be adjusted to meet the different granularity requirement. It is characteristic with exempt-maintenance,energy saving, cost-lower,safety and reliability.
MTM Medium Speed Trapezium Mill is a leading-world-level industrial mill. It is designed by our own engineers and technical workers, basing on industrial mill research of many years and adopting world-leading-powder processing technology. Our machine adopts many advantages from numbers of mill all over the world, such as trapezium working surface, flexible connection, roll linked pressure boost, etc. It has overcome the traditional mill defect completely in application, capacity, fineness, energy consumption, service life, etc. And it is the ideal substitute of the traditional mill, such as Raymond mill, high pressure suspension mill, ball mill, etc. Nowadays, our products have been widely used in metallurgy industry, electric power industrial, chemical, building, steel industry, coal industry, etc. And it has brought large economic benefits to our customers and the society.
