1. Product introduction The PFA cleaning tank is an upgraded model after the PTFE cleaning bucket. It is specially designed for semiconductor photovoltaic and other industries. It is formed in one piece, so there is no need to worry about leakage. Mainly used for soaking and cleaning flower baskets or wafer cassettes with chip silicon cells. Due to the characteristics of PFA, it can withstand the corrosiveness of cleaning solutions. At the same time, it has a low blank value of metal elements, no dissolution or precipitation, and will not contaminate chip wafers. Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm New: 400*300*12cm Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination. 2. Features: 1. The appearance is translucent, making it easy to observe the reagents in the tank; 2. High and low temperature resistance: -200ï½?+260â?? 3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents; 4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb; 6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.; 8. Stable chemical properties, good recoverability, and not easy to deform; 9. Teflon plastic, durable and not fragile.
Advantages of PTFE pagoda joint: 1.Excellent Corrosion Resistance: The pagoda joint crafted from PTFE exhibits superb corrosion resistance, resisting almost all chemicals, including strong acids, bases, and various organic solvents. This ensures its durability and longevity in harsh environments. 2.High Strength and Durability: The pagoda joint, due to its PTFE composition, possesses high strength and durability. Its tight structure and even distribution of stress at connection points allow it to withstand significant loads, ensuring safety and reliability. 3.Smooth Surface and Low Friction: PTFE is known for its extremely low friction coefficient, which results in smooth operation and reduced energy loss during fluid transmission. This smooth surface also aids in easy assembly and disassembly. 4.Excellent Sealing Performance: The pagoda joint made from PTFE provides excellent sealing performance, thanks to its high elasticity and gas tightness. This ensures leak-free connections and reliable fluid transmission. 5.Wide Temperature Range: PTFE maintains its physical and chemical stability over a wide temperature range, from -200�°C to +260�°C. This allows the pagoda joint to function effectively in extreme temperature conditions. 6.Ease of Installation: Compared to traditional welding and bolting methods, the pagoda joint offers a simpler and faster installation process, reducing both cost and labor
PFA, also known as soluble polytetrafluoroethylene or Teflon, is used for trace analysis, isotope detection, ICP-MS/OES/AAS analysis, and other experiments. The temperature resistance range of PFA bottle washing is very wide, and it can withstand temperatures from -200 to+260 , which means it can be used under various experimental conditions without being limited by temperature. The PFA bottle washing tube and body are reliably sealed, with sensitive spraying performance, fast recovery, and no residue left. It can be sprayed into various container positions, making cleaning very convenient. Therefore, using PFA bottle washing can make experiments more convenient. In addition, the nozzle and cap of PFA bottle washing are formed in one go, and its structure is very tight, so there will be no leakage. This is crucial for the accuracy of the experiment. PFA bottle washing can also replace volumetric flasks to prepare standard solutions, which can be controlled to add samples and water dropwise. This means that using PFA bottle washing can conduct experiments more accurately and reduce errors. Suitable for industries such as semiconductors, photovoltaics, biopharmaceuticals, and petrochemicals. Product features 1. Translucent appearance; 2. Temperature resistance -200+260; 3. The pipe and the body are sealed reliably, the sprayability is sensitive, the recovery is fast, and no residue flows out. It can be sprayed into the position of each container and is easy to clean; 4. The nozzle and bottle cap are formed at one time; 5. It can replace the volumetric flask to configure the standard solution: it can be controlled to add sample and water drop by drop.
PFA, also known as soluble polytetrafluoroethylene or Teflon, is used for trace analysis, isotope detection, ICP-MS/OES/AAS analysis, and other experiments. The temperature resistance range of PFA bottle washing is very wide, and it can withstand temperatures from -200 â?? to+260 â??, which means it can be used under various experimental conditions without being limited by temperature. The PFA bottle washing tube and body are reliably sealed, with sensitive spraying performance, fast recovery, and no residue left. It can be sprayed into various container positions, making cleaning very convenient. Therefore, using PFA bottle washing can make experiments more convenient. In addition, the nozzle and cap of PFA bottle washing are formed in one go, and its structure is very tight, so there will be no leakage. This is crucial for the accuracy of the experiment. PFA bottle washing can also replace volumetric flasks to prepare standard solutions, which can be controlled to add samples and water dropwise. This means that using PFA bottle washing can conduct experiments more accurately and reduce errors. Suitable for industries such as semiconductors, photovoltaics, biopharmaceuticals, and petrochemicals.
Product Features 1. PFA material (translucent) 2. High and low temperature resistance: -200 C to 260 C 3. Strong acid and alkali resistance, high temperature resistance, wear resistance, antistatic 4. No dissolution and precipitation, no contamination of samples 5. Also known as impact bottle, impact filter, purge bottle, buffer bottle, gas washing bottle product specification 90 degrees horizontal and vertical: 30ml/60ml (slender); 2 vertical PTFE threads: 60ml (slender)/60ml (big mouth)/90ml (big mouth)/120ml/150ml/180ml; 2 vertical ports PFA welding: 60ml (slender)/60ml (big mouth)/90ml (big mouth)/120ml/150ml/180ml; customizable.
Product Usage: Wash away the impurities in the gas, and absorb the impure gas through the selected suitable liquid medium, so as to wash away the impurities and achieve the purpose of purifying the gas. Applicable industries: Isotope industry, heavy metal industry, semiconductor, new energy, new material, chemical pharmaceutical, nonferrous metal, precious metal... other products: PFA beaker, PFA reagent bottle, PFA drop bottle, PFA graduated cylinder, PFA scrubber bottle, PFA drop bottle, PFA microcolumn... FEP experimental utensils, PTFE experimental utensils, digestion apparatus, acid removal apparatus, acid purification system...
