Mobile phones and camera.
Dried fruit and seeds, digital tools and irrigation accessories..
Technical parameters of anti-corrosion electric heating plate Model: DBF type Operating area (mm): 600 * 400mm, 400 * 300mm, 500 * 250mm, 450 * 350mm, etc Heating method: Electric heating PID digital display Working temperature: Max 220 â?? Temperature control accuracy: �± 1 â?? Surface anti-corrosion of heating plate: PFA coating Heating plate material: exquisite aluminum alloy/graphite Rated voltage: 220V (adjustable according to region) Continuous working time:>48 hours Supporting products: Crucible/beaker/PFA vials
1. Product Introduction The graphite digestion system is an instrument used for sample pretreatment in chemical analysis. It is mainly used to dissolve organic and inorganic substances in solid samples into solutions for subsequent analysis and measurement. It heats the sample in a surrounding heating method, effectively increasing the utilization rate of thermal energy. At the same time, it occupies the front end of conventional digestion equipment with its advantages of higher temperature control accuracy, small differences between holes, fast digestion, energy saving and environmental protection. It can adapt to various types of samples, including soil, water, plants, food, etc. Graphite digesters are widely used in environmental monitoring, food safety, geological exploration and other fields. It can process samples quickly and efficiently and provide accurate and reliable analysis results. 2. Graphite digester parameters Model: BZH-R-XJ Temperature control range: room temperature-220 Temperature control accuracy: ±0.1 Heating material: graphite + Teflon anti-corrosion coating Number of sample holes: 16, 24, 36, 48, 54, 63, 100 (can be customized according to customer requirements) Control and display mode: PID temperature control digital display Power supply: 220v/50Hz Supporting products: PTFE digestion tube, PFA digestion tube
1. Product Introduction: PFA sample vials are widely used in geological and mining experiments. They are a versatile experimental tool, also known as dissolution cups, digestion bottles, sample containers and beakers. These tanks are suitable for low-pressure and medium-pressure dissolution, as well as digestion of experimental samples. When used with ICP-MS/ICP-OES analyzers, these tanks can improve the accuracy of trace analysis. In addition, these tanks are designed with different bottom shapes according to experimental requirements, such as U bottom, flat bottom and V bottom. If you need to use a hot plate or a digestion instrument with holes for experiments, you can get better results with PFA dissolution tanks. 2. Description: Specifications (ml): 3/5/6/7/15/22/30/40/60 Material: PFA Temperature tolerance: -200-260â?? Applicable to sample pretreatment experiments for analysis of dozens of elements in geological and mineral samples such as: Mo, Ba, V, Si, Se, Li, Ga, Fe, Mg, Zn, Hg, K, etc. 3. Characteristics: 1. Translucent appearance, smooth inner wall, no water hanging, easy to clean; 2. Temperature resistance: operating temperature -200ï½?+260â?? (do not exceed 150 degrees under closed conditions); 3. Threaded mouth, excellent sealing, no air leakage; 4. Anti-pollution: low blank value of metal elements; 5. With low dissolution and precipitation characteristics, it is a vessel for storing standard substances and different reagents; 6. The cover and body can be digitally numbered to avoid confusion; 7. The V-shaped bottom design is convenient for the collection of small amounts of samples; the U-shaped bottom design is suitable for the detection of geophysical and geochemical exploration samples. 4. Typical users: Isotope, mining, metallurgy, nuclear industry and other industries 5. PFA series products: Reagent bottles, wash bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolution tanks, microcolumns, crucibles, valves, joints, delivery pipes, etc.web:
DBF temperaturecontrolled hotplate also known as anticorrosion hotplate has a nonstick surface treated with highquality Teflon coating which is not affected by strong acids and alkalis It is an hotplate for sample heating digestion evaporation boiling and acid removal experiments It is often used with our Teflon series such as beakers crucibles digestion tubes sample dissolution tanks digestion tank inner cups etc with good results It can meet the needs of chemical laboratories in different industries such as physics chemistry biology environmental protection pharmaceuticals food beverages teaching and scientific research for reagent heating There are many series and models for users to choose from and they can also be customized according to user requirements They are made using special processes to overcome the disadvantages of ordinary hotplates that are easily damaged due to longterm continuous work 2 Technical parameter description 1 Model DBF type 2 Operating area mm 600400mm 400300mm 500250mm customizable 3 Heating method electric heating PID digital display 4 Working temperature room temperature 220 degrees Celsius 5 Temperature control accuracy 1 6 Heating plate surface anticorrosion PFA Teflon coating no coating 7 Heating plate material refined cast aluminum highquality graphite 8 Rated voltage 220v 9 Continuous working time 48h Advantages Teflon anticorrosion coating anticorrosion cast aluminum heating plate heats up quickly Multiple samples can be processed simultaneously without cross contamination DBF type hotplate pillars are all made of PTFE material which greatly reduces the metal parts entering the laboratory Customizable time setting function segmented temperature control and different plate surfaces can also be processed as required
1. Product introduction: In geological and mineral experiments, PFA sample dissolving tanks are widely used. They are a multifunctional experimental tool, also known as dissolution cups, digestion bottles, vials, beakers, etc. These jars are suitable for low and medium pressure sample dissolution and digestion of experimental samples. When used with ICP-MS/ICP-OES analyzers, these jars improve the accuracy of trace-level analysis. In addition, these jars are designed with different bottom shapes according to experimental needs, such as U bottom, flat bottom and V bottom. If you need to use an electric hot plate or a digestion instrument with holes for experiments, you can get better results by combining it with a PFA sample dissolving tank. 2. Description: Specifications (ml): 3/5/6/7/15/22/30/40/60 Material: PFA Withstand temperature: -200-260â?? Suitable for sample pretreatment experiments for the analysis of dozens of elements in geological and mineral samples, such as: Mo, Ba, V, Si, Se, Li, Ga, Fe, Mg, Zn, Hg, K, etc. 3. Characteristics: 1. Translucent appearance, smooth inner wall, no water hanging on, easy to clean; 2. Temperature resistance: operating temperature -200~+260â?? (do not exceed 150 degrees under closed conditions); 3. Threaded port, excellent sealing, no air leakage; 4. Anti-pollution: low blank value of metal elements; 5. It has low dissolution and precipitation characteristics and is a container for storing standard substances and different reagents; 6. The cover and body can be numbered digitally without confusion; 7. The V-shaped bottom design facilitates the collection of small amounts of samples; the U-shaped bottom design is suitable for the detection of geophysical and geochemical samples. 4. Typical users: Isotope, geology and minerals, metallurgy, nuclear industry and other industries 5. PFA series products: Reagent bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes, etc.
DBF temperature-controlled electric hot plate, also known as anti-corrosion electric hot plate, has a Teflon-coated non-stick surface and is not affected by strong acids and alkalis. It is an electric hot plate used for sample heating, digestion, evaporation, boiling and acid removal experiments. It can be used with our Teflon series such as beakers, crucibles, digestion tubes, sample dissolving tanks, digestion tank inner cups, etc., and the effect is good. It can meet the reagent heating needs of chemical laboratories in different industries such as physics, chemistry, biology, environmental protection, pharmaceuticals, food, beverages, teaching, and scientific research. Technical parameters of anti-corrosion electric heating plate Model: DBF type Operating area (mm): 600 * 400mm, 400 * 300mm, 500 * 250mm, 450 * 350mm, etc Heating method: Electric heating PID digital display Working temperature: 220 Temperature control accuracy: ± 1 Surface anti-corrosion of heating plate: PFA coating Heating plate material: exquisite aluminum alloy/graphite Rated voltage: 220V (adjustable according to region) Continuous working time:>48 hours Supporting products: Crucible/beaker/PFA vials characteristic: 1. PFA Teflon coating, anti-corrosion cast aluminum heating plate heats up quickly; 2. The board and the control box can be made into two parts, so that the acid mist during the experiment will not corrode the components in the control box, thereby increasing the service life and processing multiple samples at the same time without cross-contamination; 3. Customizable time setting function and segmented temperature control; 4. The exposed part of the power cord is wrapped with PFA tubes to further prevent acid gas from corroding components;
1. Product introduction: In geological and mineral experiments, PFA sample dissolving tanks are widely used. They are a multifunctional experimental tool, also known as dissolution cups, digestion bottles, vials, beakers, etc. These jars are suitable for low and medium pressure sample dissolution and digestion of experimental samples. When used with ICP-MS/ICP-OES analyzers, these jars improve the accuracy of trace-level analysis. In addition, these jars are designed with different bottom shapes according to experimental needs, such as U bottom, flat bottom and V bottom. If you need to use an electric hot plate or a digestion instrument with holes for experiments, you can get better results by combining it with a PFA sample dissolving tank. 2. Description: Specifications (ml): 3/5/6/7/15/22/30/40/60 Material: PFA Withstand temperature: -200-260 Suitable for sample pretreatment experiments for the analysis of dozens of elements in geological and mineral samples, such as: Mo, Ba, V, Si, Se, Li, Ga, Fe, Mg, Zn, Hg, K, etc. 3. Characteristics: 1. Translucent appearance, smooth inner wall, no water hanging on, easy to clean; 2. Temperature resistance: operating temperature -200~+260 (do not exceed 150 degrees under closed conditions); 3. Threaded port, excellent sealing, no air leakage; 4. Anti-pollution: low blank value of metal elements; 5. It has low dissolution and precipitation characteristics and is a container for storing standard substances and different reagents; 6. The cover and body can be numbered digitally without confusion; 7. The V-shaped bottom design facilitates the collection of small amounts of samples; the U-shaped bottom design is suitable for the detection of geophysical and geochemical samples. 4. Typical users: Isotope, geology and minerals, metallurgy, nuclear industry and other industries 5. PFA series products: Reagent bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes, etc.
The PFA sub-boiling acid distillation system is a purification equipment used to treat acidic solutions. It is made of PFA and PTFE materials and has excellent chemical inertness and corrosion resistance, especially suitable for handling highly acidic solutions. The working principle of the PFA sub-boiling acid distillation system is based on the principle of sub-boiling distillation. By heating the acidic solution to a sub-boiling temperature, it is partially evaporated. During this process, low-volatility impurities and ions are left in solution, while pure acidic vapors are collected and condensed. This enables the purification of acidic solutions. The advantages and features of the PFA sub-boiling acid distillation system include: 1. High purity: Through sub-boiling distillation, the PFA sub-boiling acid distillation system can purify the solution, remove impurities and ions in the acidic solution, and provide high-purity acidic steam. 2. Corrosion resistance: PFA material has good corrosion resistance, can withstand the erosion of strong acidic solutions, and will not be dissolved or contaminated by acidic substances. 3. Temperature control: The PFA sub-boiling acid distillation system has an accurate temperature control function, which can ensure operation at an appropriate sub-boiling temperature and avoid violent boiling and loss of the solution. 4. Energy saving: Compared with traditional acid distillation methods, the PFA sub-boiling acid distillation system operates at low temperature and low energy consumption, saving energy costs. 5. Reliability: PFA material is non-toxic, odorless, and has good chemical stability. The use of PFA sub-boiling acid distillation system can ensure the safety of experimental operations and working environment. PFA sub-boiling acid distillation systems are commonly used in the chemical industry, laboratory research and pharmaceutical fields to purify acidic solutions. This system can greatly improve the purity and quality of solutions and is suitable for use in experiments, analysis and production processes that require higher purity. It is necessary to select the appropriate model and specifications of the PFA sub-boiling acid distillation system according to the specific acidic solution and purification requirements to ensure the purification effect and use efficiency. Features of Binzhenghong SCH series sub-boiling distiller system/acid purification system: 1. Large capacity - the amount of acid evaporated at one time can reach 6L 2. Temperature control-PID temperature control digital display, real-time temperature display 3. Liquid level gauge - visually displays the remaining acid amount 4 distillation speeds, one distillation speed can reach 135ml/L Subboiling acid distillation tower/acid purification system specifications: 1L/2L/4L/6L
1. Product Introduction The graphite digestion system is an instrument used for sample pretreatment in chemical analysis. It is mainly used to dissolve organic and inorganic substances in solid samples into solutions for subsequent analysis and measurement. It heats the sample in a surrounding heating method, effectively increasing the utilization rate of thermal energy. At the same time, it occupies the front end of conventional digestion equipment with its advantages of higher temperature control accuracy, small differences between holes, fast digestion, energy saving and environmental protection. It can adapt to various types of samples, including soil, water, plants, food, etc. Graphite digesters are widely used in environmental monitoring, food safety, geological exploration and other fields. It can process samples quickly and efficiently and provide accurate and reliable analysis results. 2. Graphite digester parameters Model: BZH-R-XJ Temperature control range: room temperature-220â?? Temperature control accuracy: �±0.1â?? Heating material: graphite + Teflon anti-corrosion coating Number of sample holes: 16, 24, 36, 48, 54, 63, 100 (can be customized according to customer requirements) Control and display mode: PID temperature control digital display Power supply: 220v/50Hz Supporting products: PTFE digestion tube, PFA digestion tube IV. Advantages of our graphite digester Advantage 1: High temperature resistance, acid and alkali resistance and organic solvent corrosion resistance, good stability; Advantage 2: Fast sample digestion speed, batch processing of samples; Advantage 3: Fully enclosed design, while preventing heat loss to a large extent, can also effectively avoid acid mist invasion and damage to equipment components; Advantage 4: Clean and corrosion-resistant: Using a special spraying process, the coating is uniform, firm, and will not fall off after long-term use; Advantage 5: Using advanced integrated surround heating method, all parts of the sample are heated evenly, and the digestion is fast and complete; Advantage 6: Easy to operate, environmentally friendly and energy-saving, saving economic costs; Advantage 7: PID temperature control system, excellent performance, high temperature control accuracy, up to �±1â??. Advantage 8: The heating rate can be adjusted to achieve program heating and control the heating holding time, and the heating rate is stable; We advocate stable, healthy and fast experiments! Application areas Environmental monitoring: sewage, drinking water, sludge, mineral mud, sewage, soil, etc. Food and agricultural product inspection: milk powder, fish, vegetables, tobacco, plants, fertilizers, non-staple food, etc. Consumer product quality control: cosmetics, industrial products, etc. Scientific research: experimental analysis, project development, etc. Disease prevention and control: biological samples, human hair, etc.
