White color
1. Application
*Sanitary sealing around sinks, tubs, urinals and wirlpools
*Sealing for kitchen, skirting lines, furniture, ceramic tiles.
*Sealing for windows and doors with anti-mildew requirements.
2. Product features
*One component, excellent extrusion, easy to use
*Excellent mildew resistence standard
*Ecofriendly with low VOCs
*Resists staining, spotting, and color changes
3. Packing specification
*Cartridge: 240ml/260ml/280ml/300ml
*Sausage: 590ml
1. Application
* Suitable for construction&home decoration
*Sealing for window frames and glazing, architraves, etc.
*Applicable to fish tank sealing
2. Product Features
*One component, excellent extrusion.
*No-sag, ready to use
*Good adhesion to a broad substrate range such as glass, upvc, etc.
3. Packing Specification
Cartridge: 240ml, 260ml, 280ml, 300ml
silicon carbide radiant tube
Product performance of silicon carbide radiant tube
Silicon carbide radiant tube this product has the characteristics of good thermal conductivity, high temperature resistance, corrosion resistance, oxidation resistance and long service life.
Application of silicon carbide radiant tube
Silicon carbide radiant tubes are widely used in gas and oil industrial kilns such as tunnel kilns, shuttle kilns and roller kilns, as well as industrial coke ovens in iron and steel metallurgy and other industries.
1. The inner tube of the flame is made of silicon carbide, and SiSIC can withstand high thermal stress;
2. Multiple sections of inner tubes can be combined into inner tubes of required length according to the length of radiant tubes;
3. The SiSIC flame inner tube allows the metal radiation tube to bend without damaging the flame inner tube and radiation tube;
4. Compared with the metal tube, the load of SiSIC in the radiation tube can be reduced;
5. Compared with metal inner tube, SiSIC flame inner tube has higher thermal conductivity.
Specification of silicon carbide radiant tube
The specific specifications of silicon carbide radiant tube can be made according to the needs of users
Application:
Suitable for all kinds of glass curtain wall, sunroom, high-grade doors and windows, weather-resistant seal. Also suitable for sealing and bonding of solar cell installations.
Features:
1) One-component, excellent extrusion.
2) No sagging, easy for construction.
3) Good adhesion to large substrate.
4) Good weather resistance and UV resistance.
5) Implementing standard GB/T 14683-2017, 25HM
Application:
Suitable for sealing of various installations of windows and doors.
Features:
1) One-component, excellent extrusion.
2) No sagging, easy for construction.
3) Good adhesion to large substrate.
4) Good weather resistance.
5) Implementing standard GB/T 14683-2017, 25HM
Acrylic sealant is a one component, paintable and flexible, mildew resistant acrylic sealant formulated for sealing of gaps and joints where slight movement or vibration causes conventional, non- elastic fillers and putties to crack and fall out. It had good adhesion to most porous surfaces without primer and is economy yet environmental friendly that can be cleaned up with water.
CHARACTERISTICS:
1.Excellent flexible.
2.Paintable.
3.Ready to use.
4.It can be cleaned with soap and water.
5.Durable waterproof and anti-mildew.
6.Non slump - can be applied to vertical surface.
7.No pollution and low odor.
8.It can be used indoor decoration and construction purpose.
MAIN USE:
For caulking, sealing and decoration uses in waterproofing, gap filing, wood frame joints, doors & windows sash, drywall, plaster,marble, tile & brick works, painters sealant for interior works.
COLORS:
White, black, grey and other colors based on customer's requirement.
PACKING:
It is available in 300ml disposable plastic cartridges, and 590ml sausages.
STORAGE:
When stored at 27 or lower temperature in the original unopened container, it has a shelf life of 9 months from the date of manufacture.
MAIN USE:
1.Specially used for windshield and side glass of bus, car, railway vehicle (metro, high-speed rail), ship, spaceflight, engineering machinery vehicle, carriage and special vehicle.
2.For glass steel and plastic accessories (car roof, side body and car front).
3.For metal, plastic, and glass which requires high tensile strength and elasticity, the bonding can bear high mechanical deformation force.
CHARACTERISTICS:
1.One component formulation.
2.Modest hardness after curing.
3.Flexible, durable and excellent extruding performance.
4.No need primer to glass.
5.No sagging, no pollution and corrosion to base material and environment.
6.Excellent sealing performance, excellent water and aging resistance.
PACKING:
It is available in 300ml cartridges, and 590ml sausages.
COLORS:
Black & other OEM colors.
STORAGE:
When stored at 25 or lower temperature in the original unopened container, it has a shelf life of 12 months from the date of manufacture.
Neutral silicone sealant
1.Manufacturer of silicone sealant in over 15years.
2.We insist on good quality with competitive price to make clients satisfied.
3.Final price will be determined by more details confirmed.
4.Free samples available,delivery cost is to be paid by clients.
5.OEM/ODM available.
6.Health and safety considerations
7.LT: 7-15days.
CHARACTERISTICS:
1.Good weather resistant ability.
2.One-component,moisture curable,excellent thixotropy,easy to apply.
3.Persistent water proofing.
4.Good adhesion, excellent adhesion to most building materials.
MAIN USE:
It's suitable for the sealing of the joints of all kinds of architectural doors and windows, and the assembly and sealing of doors and windows glass. Not suitable for structural bonding.
COLORS:
Clear, white, black, grey and other colors based on customer's requirement.
PACKING:
It is available in 280mm and 300ml disposable plastic cartridges, and 590ml sausages.
TRANSPORTATION:
This product is transported by non-dangerous goods.
STORAGE:
When stored at 27 or lower temperature in the original unopened container, it has a shelf life of 12 months from the date of manufacture. INT-795 clear sealant has a shelf life of 12 months from the date of manufacture.
Netural Silicone Sealant T-600 is a one component,high quality moisture curing neutral silicone sealant designed for sanitary applications where non-corrosive, moldproof and chemically resistant properties are required. It is suitable for sealing of connection joints between varieties of substrates in wet areas.
CHARACTERISTICS:
Mold & mildew proof.
Resistant to cleaning agents. Maintains its flexibility at temperature extremes.
Highly elastic, 25% movement capability.
UV, water and weather proof.
Non-corrosive neutral cure.
Fast curing. Low odor.
Interior/exterior use.
Non-sag.
MAIN USE:
1.Sealing applications of joints around bathtubs,showers and sinks.
2.Sealing of joints between tiles, ceramic, metal sheets and walls.
3.Sealing expantion joints in tile walls.
4. Sealing of connection joints between walls and floors.
5. Sealing of joints between glazing and supporting substrates.
PACKING:
It is available in 280ml and 300ml disposable plastic cartridges.
COLOR:
Clear and other colors based on customer's requirement.
STORAGE:
When stored at 25 or lower temperature in the original unopened container, it has a shelf contact:
INTRODUCTION:
Acetic Silicone Sealant t300 is one-component, acetoxy cure, high quality silicone sealant designed for big glass and other general purpose glazing and waterproofing application. It has high tensile strength and good elasticity, excellent weatherability, stability,waterproof and good adhesion to most construction materials without a primer.
MAIN USE:
1.Fixing and glazing for glass structural for all kinds of architectural curtain wall.
2.Jointing and sealing for all kinds of ornamental glass engineering.
3.Big glass panels, aquarium, swimming pool sanitary works and other glass engineering.
COLOR:
Clear, white, black, grey and other colors based on customer's requirement.
PACKING:
240ml/260ml/280ml/300ml per pcs; 24pcs per carton.
TRANSPORTATION
This product is transported by non-dangerous goods.
STORAGE:
When stored at 27 or lower temperature in the original unopened container, it has a shelf life of 12 months.
CONTACT:
Acetic silicone sealant
1.Manufacturer of silicone sealant in China over 15years.
2.We insist on good quality with competitive price to make clients satisfied.
3.Final price will be determined by more details confirmed.
4.Free samples available,delivery cost is to be paid by clients.
5.OEM/ODM available.
6.Health and safety considerations
7..LT: 7-15days.
One part, neutral, moisture cure, and high performance silicone sealant .
It can be used for expansion joints, metal panels, glass, natural stones, window frames,
etc. Excellent sealing forms elastomeric and waterproofing interface for most building substrates.
Features & Benefits
Enhance d building aesthetic performance prevents long term dirt (or residue)
run down on metal panels and coated glass or staining of porous substrates
Excellent adhesion to most building substrates, such as glass, metal, masonry
ceramic tile, natural stone granite and polymer coating materials.
Outstanding UV and weather resistance
Free of plasticizer and oil. Non pollutant s on building materials
Low modulus properties, excellent tensile strength and elongation It can be applied on the movement joints of highway, airport s, bridges, parking lots.
Approvals
Passes American standard specification ASTM C920.
Meets Taiwanese Public Construction Commission, Executive Yuan silicone.
specification : Chapter 07921.
Meets the related standard specifications: CNS8903, CNS8904 , BS EN ISO11600 ,
and JIS A 5758.
Packaging
DS-900 is supplied in 300 Ml Cartridges.
MP is an easy to use 1 component oxime type silicone sealant which there is pungent smells less and little corrosion as a multi-purpose silicone sealant. It may be used for various construction parts including windows and glasses because of excellent weather-proofing, durability, adhesion, and construct ability.
Use
Window and frame joint sealing
Glass, mirror, and Al sash sealing
**Always test adhesion to substrate before starting project
Feature
1 Component Type Silicone Sealant
Neutral Curing Type
Excellent adhesion to various materials without any primer
Easy to use as one component and room temperature curing type
Easily squeezable for convenient work
Good weatherproofing and durability
Advantages
Good adhesion to various materials like PVC , metal panel , and glass
Excellent weatherproofing
Non Slump
Packing / Color
300g Plastic Cartridge Type Packing (transparent)
400g Plastic Cartridge Type Packing (other colors)
25 ctg / Box
Flexible Multi-Purpose Hybrid Polymer Sealant
Description
AFTEK FLEX-PRO MS is a one-component sealant based on silane modified polymer, which is moisture cured sealant. Humidity and temperature can influence on the skin formation and curing speed, and the joint depth can also influence on the curing time.
AFTEK FLEX-PRO MS is free of solvents, isocyanates,silicones and PVC. It has very low VOC while curing. It performs good adhesion to most substrates; It is suitable for most of common construction materials,especially to concrete, aluminum, mason, glass, etc.
and it is compatible with most of paint systems. It has very good UV resistance property that can be used for interior and exterior applications.
Silicone sealant equipment produced by JCT company,Well made,Reasonable structure,Easy to operate,Suitable for the production of a variety of silicone sealant.
We can provide custom-made for you .
.Production line specifications:
1)30-60 tons / month silicone rubber production line;
2)60-120 tons / month silicone rubber production line;
3)120-360 tons / month silicone rubber production line;
4)150-450 tons / month silicone rubber production line;
5)300-600 tons / month silicone rubber production line;
Product features:
1.Extremely high heat transfer, heat resistance and buffer.
2. Not to FPC, Glass and other damage.
3. The heat has super stable characteristics and the pressure on the product consistency.
4. High resilience and non-stick.
5. Antistatic, no powder on the surface.
Product specifications:
1, (thick:0.2mm--0.45mm) * (width:8mm-600mm) * (length:5-30m).
2, special specifications can be customized according to customer demand, and provide our customers customized various specifications of the iceberg.
3, the products are divided into common type SG (gray) and anti-static SGB (black).
4, the product is commonly used inside diameter 32mm, 38mm, can be customized according to customer demand.
Product application:
COG/FOG hot pressing bonding process for various display screens, ACF conductive film hot pressing, etc..
Product application:
application of various display COG\FOG hot state fixed process, or for transistor, IC and other electronic semiconductor products for insulation material, heat dissipation material use, or application in electric regulator and a temperature sensor, the advance on the bottom surface of the hot pressing head, the conduction temperature more uniform, the isolation is pressing products and head, and can prevent electrostatic isolation protection role.
