MAIN USE:
1.Specially used for windshield and side glass of bus, car, railway vehicle (metro, high-speed rail), ship, spaceflight, engineering machinery vehicle, carriage and special vehicle.
2.For glass steel and plastic accessories (car roof, side body and car front).
3.For metal, plastic, and glass which requires high tensile strength and elasticity, the bonding can bear high mechanical deformation force.
CHARACTERISTICS:
1.One component formulation.
2.Modest hardness after curing.
3.Flexible, durable and excellent extruding performance.
4.No need primer to glass.
5.No sagging, no pollution and corrosion to base material and environment.
6.Excellent sealing performance, excellent water and aging resistance.
PACKING:
It is available in 300ml cartridges, and 590ml sausages.
COLORS:
Black & other OEM colors.
STORAGE:
When stored at 25 or lower temperature in the original unopened container, it has a shelf life of 12 months from the date of manufacture.
LN-PS201 is a one-component, medium-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics. INSTRUCTIONS l Before application, be sure that joint surfaces are clean, dry and free of all contamination, l Apply sealant evenly, If necessary, use masking tape and remove the tape while the sealant is still soft, l Joint width/depth ratio should be 2:1 (Table 1), l If necessary, use back up material to adjust joint depth, l Sealants should adhere to only two surfaces of the joint: Use backer rods and bond breakers to facilitate. STORAGE AND SHELF LIFE; l 12 months if stored in its original package, away from direct sunlight and moisture, between +10 �C and +25 �C
It is based on moisture curing polyurethane, containing safety propellant, is used to seal gaps and crevices with very high expansion yield UP TO 65 LITERS, the post-expansion is quite low to prevent deformation. The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for pipes, windows and doorframes. Foam can be cut once fully cured, provides excellent bond to lumber, plywood, concrete, metals, masonry and other substrates.
Akfix 647FC is a one-component, high-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to sheet iron, aluminum, stainless steel, lead, copper, ceramic, wood etc. Permanently flexible Non-sag consistency - Exceptionally thixotropic Non-sticky / does not pick up dirt No change in volume Easy to gun, can be easily smoothed Over-paintable
Supplier: 1) sealants: advance ms polymer, polyurethane (pu), structural, weatherstrip sealants. 2) adhesives: pur wood, epoxy, semi structural adhesives. 3) coatings: waterproofing, underbody coatings. 4) diy: diy seals
It is a kind of fast acetic curing( based on polysiloxane), anti-fungi silicone sealant, which cures with atmospheric moisture to foam a high strength rubber seal with excellent adhesion to many surface such as glass, glazed surfaces, metals, most plastics, tiles, wood, concrete etc. GORVIA silicone sealant has excellent physical properties that are designed to provide outstanding durability and excellent UV resistant and weather resistant performance, multi-purpose and ready-to-use.
GS-Series N302R is a Neutral Cure GS-Series N302R (non-acid, based on polysiloxane), single component silicone sealant with High tensile strength, high modulus, it is sag resistant and rainwater accessories and will not corrode zinc or zinc/aluminum galvanized steel. It has excellent physical properties that are designed to provide outstanding durability and excellent UV resistant and weather resistant performance, multi-purpose and ready-to-use.
Acetic Silicone Sealant is a 100% silicone sealant,It has been specifically formulated for the fabrication of fresh and salt-water aquariums. This high modulus component Silicone Sealant forms strong cohesive bonds to glass without the need of primers.The bonds are unaffected by continuous immersion in water and, when fully cured, is non-toxic to fish.
Supplier: Polyurethane injection foam, ston binder, rebound binder, membrans, prymer, cold molding elastomer and another pu base materials.
polyurethane case (coatings, adhesives, sealant, elastomer), and with high quality products in this field, it reached the most variety products company position in turkey.
Services: Transportations
Product Properties Density: 0.96±0.03 g/ml Colorï¼?Clear, Whiteï¼?black Sag degree upright and parallel: No sag when applying Surface forming timeï¼?â?¤15min Tensile strengthï¼? â?¥0.6mpa Elongation at breakï¼?â?¥350% Application Rate: â?¥80ml/min Shore A Hardness: 13~23 Temperature resistance: -20-90 Packingï¼? 300ml ï¼?280ml ï¼?24pcs/carton
