DESCRIPTION : These wires are High Carbon Annealed Bright drawn wires. APPLICATION : Used in manufacturing hand sewing needle and Hosiery needle. SIZE RANGE : Min. 0.76 MM, Max. 2.00 MM
Product: Tin Wire Product composition: Sn42% Bi58% Product diameter: 0.8~2.0mm Product weight: 500g Working temperature: 180 â?? Melting point: 138â?? Product packaging: 20 rolls/box Product use: suitable for low temperature lead-free packaging of heat-resistant components, manual soldering iron welding and automatic welding in the field of secondary packaging of circuit boards; suitable for welding of heat-resistant components. product description: The melting point of Sn42Bi58 tin wire alloy produced is 138â??, which can meet the welding and packaging requirements of electronic components that are sensitive to welding temperature. Using its own patented technology, customizing special equipment and molds to manufacture brittle tin-bismuth alloy tin wires, the low-temperature solder has a low melting point and the welding operating temperature is 190 �°C. Lead-free low-temperature solder joint brightness, welding mechanical strength, tensile toughness and electronic conductivity have been greatly improved. . It has the characteristics of fast soldering speed and firm soldering, as well as its fine alloy structure, uniform composition, and excellent welding performance.
Product: Tin Wire Product composition: Sn96.5Ag3.0Cu0.5 Product diameter: 1.0mm Product weight: 1000g Working temperature: 380-420â?? Flux content: 2.0% Product packaging: 10 rolls/box product description: Using high-purity tin raw materials to fuse electrolytic copper and pure silver, it is refined through a special process; the rosin core of the product is made of high-quality pure white transparent hydrogenated rosin with an organic acid activator independently developed by itself, and is boiled in a vacuum-tight container. Its process is particularly reliable; according to the activity of the rosin core, it is divided into three types: R type (low activity), RMA type (medium activity), and RA type (high activity). , The solder wire has the characteristics of low smoke and high insulation resistance, and it also has the dual functions of spot welding and drag welding, which enhances the versatility of the solder wire.
Product name: lead-free tin wire Model: Sn99.3Cu0.7 Composition: Tin 99.3% Copper 0.7% Weight: 1kg/roll Specific gravity: 7.3g/cm3 Melting point: 227â?? Features of lead-free solder wire: Made of pure tin, good wettability, electrical conductivity and thermal conductivity. The flux is moderate, and the welding does not splash. The winding is neat, no knots, easy welding operation, and high work efficiency. Environmentally friendly lead-free tin wire complies with RoHS standards and sGs certification. Tin wires of different specifications can have various alloy compositions, different types of additives and wire diameters to choose the packaging method: 50-1000 g/roll, or according to customer requirements.
Product: Tin Wire Product composition: Sn99.95 Product diameter: 1.0mm (wire diameter can be customized 0.4mm~3.0mm) Product weight: 1000g (weight can be customized) Working temperature: 350-480 â?? Product packaging: 10 rolls/box product description: The lead-free solder wire Sn99.3Cu0.7 produced is made of high-purity tin raw material fused with electrolytic copper through a special process. It does not contain rosin, and its process is particularly reliable and unique in the industry. It is widely used in electronic equipment. , electronic products, home appliances, automotive electronics, medical equipment and other high-temperature welding products. , Easy to tin, good fluidity, no virtual welding phenomenon after welding. For welding large materials, it is necessary to preheat in advance and then tin to achieve the ideal welding effect. Type: Lead-free tin wire Model Number: Sn99.95 Place of Origin: China Alloy Or Not: Not Alloy SIize: Wire diameter: 0.3mm-6.0mm or Size can be customized according to customer needs. Package: 50-1000g/roll.Standard export package or as required. Payment: T/T,Western Union,L/C,etc.
Model Chemical Composition% Core wire diameter (mm) Wire weight (g/m) Feed speed (m/min) Treatment temperature() Re Mg Si Ca Ba Sb BN-401 - - 55-60 28-30 - - 13 230 50-100 1600 BN-402 2-4 27-30 40-45 4-5 - - 13 230 15-25 1460-1500 BN-403 4-5 27-30 40-45 3-4 - 3-4 13 235 15-25 1460-1500 BN-404 20-24 5-6 38-42 0.5-2 1-2 - 13 240 15-25 1460-1500 BN-405 - - 55-65 2-4 6-8 - 13 260 12-18 1350-1440 Packing: Horizontal or Vertical type on steel/wooden pallet. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Assay of Oxidizable elements and microelements can be adjusted and controlled by using cored wire. It can help to improve the alloy yield,reduce smelting cost, shorten smelting time and control composition precisely. 2.It can purify the molten steel and partly change steel inclusion morphology and properties, improving molten steel quality and casting state. 3.The equipment for cored wire injection is simpleï¼?leading to small occupation area. Application 1.It is used to steel-making and foundry industries. 2.It can purify steel inclusion morphology, improve castability of molten steel and usablity of steel. It can obviously improve the alloy yield, reduce the alloy consumption and gain remarkable economic benefits.
Characteristics 1.Assay of Oxidizable elements and microelements can be adjusted and controlled by using cored wire. It can help to improve the alloy yield,reduce smelting cost, shorten smelting time and control composition precisely. 2.It can purify the molten steel and partly change steel inclusion morphology and properties, improving molten steel quality and casting state. 3.The equipment for cored wire injection is simpleï¼?leading to small occupation area.
Introduction Pure Zinc & Zn/5Al are excellent material choices for corrosion protection in both atmospheric and marine environments. Using either the electric arc spray or combustion wire process, wire coatings of these materials act as sacrificial anodes, galvanically protecting iron or steel substrates.Decades of field work using these coatings has clearly demonstrated that they are far more effective and longerlasting than hot dip galvanizing. Coatings of ZnAl often have better corrosion resistance than either pure zinc or aluminum, by combining the advantages of both materials. This is particularly true in areas where crevices exist and residual moisture and contamination is present, and in areas where the coating has been scratched or scraped, resulting in coating voids and exposed substrate. Using the electric arc spray process, coatings of these materials are often used in the electronics industry for EMI and RF shielding, or as conductive coatings on capacitors. Typical Uses and Applications Atmospheric and immersion corrosion protection on large steel or iron structures such as bridges, roadway barriers, posts and poles, offshore structures and marine structures. Atmospheric corrosion protection on steel or iron components such as tanks and gas bottles EMI and RF shielding on plastic components (electric arc spray only) Electrical conductance on components such as the Conductive areas on insulators and capacitor end caps Product Details Chemical composition: Type Chemical composition Zn Al Others Zn 99.9+ Balance 0.1 Zn 15Al Balance 15 Specifications Grade AWS Zn C2.25/C2.25M W-Zn-1 Physical Properties Grade Density Rockwell Hardness Zn 7.14 g/cm3 ZnAl 7.18 g/cm3 Typical Deposit Characteristics: Grade Typical Hardness Bond Strength Deposit Rate Deposit Efficiency Machilityineab Zn HRB 20 - 30 6.9 - 15.0 Mpa 24 lbs /hr/100A 0.7 Good Zn 5Al HRB 40 -45 20.7 - 24.1 Mpa / / Good Standard Sizes & Packing: Diameter Packing Wire Weight 1/16 (1.6mm) D 300 Spool 15kg((33 lb)/spool Other sizes can produced based on customers' requirement.
Specification Place of origin:hebei, china (mainland) Brand name:ac Model number:ac-rb17 Material:hot dipped galvanized\stainless steel wire Surface treatment:galvanized Type:razor barbed wire coil Razor type:cross razor wire\single razor wire Product name:razor wire Material:galvanized wire or stainless steel wire Razor wire blade ty p e :bto- 10, 22, 0;c bt-6 0, 65, etc Razor wire blade thickness: 0.35mm-0.6mm Razor wire clips: 3clips or 5 clips or without clips Razor wire outside diameter:450mm-960mm Razor wire standard length per coil:10-18m Razor wire qc:iso9001:2008
Calcium Metal Lump Ca: 98.5%min with size 50-200mm,90%min Calcium Metal Granular Ca: 98%min, or 98.5%min size: 0-2mm,0-3mm,0.2-2mm,0.2-3mm,90%min Calcium Metal Turnings Ca: 98%min Width: 10mm, Length: 20mm, Thickness: 1mm Packing for above: steel drum with wrapped , filled in Argon gas inside.
Pure zinc wire The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use Product purity: zinc content more than 99.995% Diameter: 1.0mm-4.0mm Package20--5kg/Bundle 15kg-20kg/Shaft 50kg-250kg/Barrel MaterialAdopt 0# distillation zinc ingot produced by Hulo Island Zinc Co., LTD, zinc content more than 99.995%. The material used is strictly stick to national standards GB/470-2008 Characters: 1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents. 2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature. 3.The thick of coating can be changed in large range from several microns to several millimeters 4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products. Transportation storage It is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain. Applications The thermal spraying wire is used in a variety of applications, such as: 1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres 2.Coatings to resist heat and prevent scaling of conventional low alloy steels 3.Bond coats for improving the adhesion of top coatings 4.Coatings on moulds in the glass industry It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
NiAl 95/5 alloy is a nickel aluminium alloy characterized by dense coating,high temperature oxidation resistance, heat shock resistance and scratch resistance.This wire has stable chemical composition, low oxgen and high bonding strength. Typical applications for NiAl 95/5 are widely used in arc and flange flame spray systems, Coatings to resist heat and prevent scaling of conventional low alloy steels,Bond coats for improving the adhesion of top coatings,Coatings on moulds in the glass industry. Common name: NiAl 95-5, Nickel Aluminum 95/5 N9 Ni95Al5 95/5 Nickel Aluminum F-80NA Nickel Aluminium 95/5
TANKII 45CT is a nickel chrome titanium wire specifically designed for arc spraying. It produces dense, well-bonded coatings with excellent corrosion resistance and good wear resistance. It is highly resistant to sulfur and vanadium atmospheres up to 1825°F. It has proven to be particularly effective as a protective arc spray coating for boiler tubes in black liquor recovery boilers and coal fired utility boilers.
TANKII Cr13 is a 420 stainless steel wire, specifically designed for arc spray processes. TANKII Cr13 forms a dense, well bonded coating, with excellent wear resistance and good corrosion resistance. It is widely used for machine elements repair, dimensional restoration, and wear resistant application. TANKII Cr13 s low shrink rate characteristics allows for increased coating thickness on parts requiring heavier coatings.
We are dealing with thermal spray wires such as nial95/5 wires for bond coats.
We are dealing with thermal spray wires such as nicrti wire for boiler. And our standard packing is 15 kgs per spool. Normally we have them in stock.
We are dealing with thermal spray wires such as stainless steel 420 wire. And we have 3 tons in stock with size 1.6mm. And our standard packing is 15 kgs per spool.
We are dealing with thermal spray wire such as cual8 wire. And normally we have them in stock. Our standard packing is 15 kgs per spool.
We are dealing with thermal spray wire such as babbit wire used for turbine. And now normally we have 1.6mm babbitt wire in stock, and our standard packing is 15 kgs per spool.
Tyre bead wire is a high quality carbon metal. It is incorporated in the structure of the tyre to withstand bumps, heat and other hazardous conditions. radial tyre bead wire is 1.6 mm and nylon tyre bead wire is 1.10mm. Therefor, the wire obtained from end of life tyres is also of high quality matieral and resuing it can be a highly lucrative for the businesses as well as the environment. Scrap Bead Wire is used in converting to shot blasting, high tension springs, wire mesh, wire baskets, nails, cutting tools. Since this is extracted from tyres it is available at a very reasonable rates. A Scrap truck or Bus Tyre consists of 20-25% of high quality steel in it. The metal bead wire is obtained when the waste tyre is put into the shredding machines. It is very important to derive the bead wire in one single piece. The wire can easily be oxidised so protecting it from different atmospheric agents is important. So to meet our clients' expectations, we have set strict standards and quality control techniques. )
