Product introduction: Cable Joint as an important connection point of the whole power supply network, its running stability will directly affect the quality of the power supply system. Because the cable joint is made artificially in the on-site installation is complete, the environment affected by the construction and operation of the environment, will inevitably cause the error of installation, external damage, cable breakdown caused by explosion and water etc. And in the Cable Joint breakdown and explosion will release a lot of energy, the surrounding power facilities or personnel to cause harm, or even cause the occurrence of the two accident. To solve these problems, our company developed with fire prevention, waterproof, explosion-proof function Scotchcast Resin Cable Joints, all-round protection, once the explosion or breakdown of cable joints, can effectively protect the surrounding power facilities and other personnel, prevent the occurrence of two damage. Technical characteristics: 1, the shell is made of Scotchcast Resin, Scotchcast Resin are anisotropic materials, coupled with the formula and additives in a wide range of selectivity, glass steel according to the work environment and the state, adding special flame retardant additives, the glass steel material with good flame retardancy, the main parameters of flame retardant oxygen index should reach 62.5%. A high-quality composite glass steel, it has a special function to prevent acid, alkali, salt, oil and other corrosive media, and will not rust. The coastal areas and chemical sites and long buried underground requirements. Product performance to ensure that accessories can be a long time stable operation. 2, in the combination of Scotchcast Resin Cable Joints with silicone rubber sealing ring to seal the shell, enhance the waterproof performance of the cable intermediate joint. 3, with a strong pressure performance, Scotchcast Resin Cable Joints can withstand the impact from the internal or external. 4, in the Scotchcast Resin Cable Joints side of a sealing plug sealed with silicone rubber discharge hole, and discharge hole direction can be adjusted, once the cable joint explosion, discharge hole on the sealing plug can be quickly opened and can effectively prevent the other cables, or the surrounding environment destruction, flame retardant properties of the shell is also can guarantee the internal flame extinguished due to hypoxia. 5, convenient and quick installation, can meet the requirements of 10kV, 35kV single core and three core cable laying. 6, safe and reliable, widely used in electric power, coal, chemical industry and other high-risk industries and key projects of power supply network.
Product introduction: Cable Joint as an important connection point of the whole power supply network, its running stability will directly affect the quality of the power supply system. Because the cable joint is made artificially in the on-site installation is complete, the environment affected by the construction and operation of the environment, will inevitably cause the error of installation, external damage, cable breakdown caused by explosion and water etc. And in the Cable Joint breakdown and explosion will release a lot of energy, the surrounding power facilities or personnel to cause harm, or even cause the occurrence of the two accident. To solve these problems, our company developed with fire prevention, waterproof, explosion-proof function Scotchcast Resin Cable Joints, all-round protection, once the explosion or breakdown of cable joints, can effectively protect the surrounding power facilities and other personnel, prevent the occurrence of two damage. Technical characteristics: 1, the shell is made of Scotchcast Resin, Scotchcast Resin are anisotropic materials, coupled with the formula and additives in a wide range of selectivity, glass steel according to the work environment and the state, adding special flame retardant additives, the glass steel material with good flame retardancy, the main parameters of flame retardant oxygen index should reach 62.5%. A high-quality composite glass steel, it has a special function to prevent acid, alkali, salt, oil and other corrosive media, and will not rust. The coastal areas and chemical sites and long buried underground requirements. Product performance to ensure that accessories can be a long time stable operation. 2, in the combination of Scotchcast Resin Cable Joints with silicone rubber sealing ring to seal the shell, enhance the waterproof performance of the cable intermediate joint. 3, with a strong pressure performance, Scotchcast Resin Cable Joints can withstand the impact from the internal or external. 4, in the Scotchcast Resin Cable Joints side of a sealing plug sealed with silicone rubber discharge hole, and discharge hole direction can be adjusted, once the cable joint explosion, discharge hole on the sealing plug can be quickly opened and can effectively prevent the other cables, or the surrounding environment destruction, flame retardant properties of the shell is also can guarantee the internal flame extinguished due to hypoxia. 5, convenient and quick installation, can meet the requirements of 10kV, 35kV single core and three core cable laying. 6, safe and reliable, widely used in electric power, coal, chemical industry and other high-risk industries and key projects of power supply network.
Product introduction: Cable Joint as an important connection point of the whole power supply network, its running stability will directly affect the quality of the power supply system. Because the cable joint is made artificially in the on-site installation is complete, the environment affected by the construction and operation of the environment, will inevitably cause the error of installation, external damage, cable breakdown caused by explosion and water etc. And in the Cable Joint breakdown and explosion will release a lot of energy, the surrounding power facilities or personnel to cause harm, or even cause the occurrence of the two accident. To solve these problems, our company developed with fire prevention, waterproof, explosion-proof function Scotchcast Resin Cable Joints, all-round protection, once the explosion or breakdown of cable joints, can effectively protect the surrounding power facilities and other personnel, prevent the occurrence of two damage. Technical characteristics: 1, the shell is made of Scotchcast Resin, Scotchcast Resin are anisotropic materials, coupled with the formula and additives in a wide range of selectivity, glass steel according to the work environment and the state, adding special flame retardant additives, the glass steel material with good flame retardancy, the main parameters of flame retardant oxygen index should reach 62.5%. A high-quality composite glass steel, it has a special function to prevent acid, alkali, salt, oil and other corrosive media, and will not rust. The coastal areas and chemical sites and long buried underground requirements. Product performance to ensure that accessories can be a long time stable operation. 2, in the combination of Scotchcast Resin Cable Joints with silicone rubber sealing ring to seal the shell, enhance the waterproof performance of the cable intermediate joint. 3, with a strong pressure performance, Scotchcast Resin Cable Joints can withstand the impact from the internal or external. 4, in the Scotchcast Resin Cable Joints side of a sealing plug sealed with silicone rubber discharge hole, and discharge hole direction can be adjusted, once the cable joint explosion, discharge hole on the sealing plug can be quickly opened and can effectively prevent the other cables, or the surrounding environment destruction, flame retardant properties of the shell is also can guarantee the internal flame extinguished due to hypoxia. 5, convenient and quick installation, can meet the requirements of 10kV, 35kV single core and three core cable laying. 6, safe and reliable, widely used in electric power, coal, chemical industry and other high-risk industries and key projects of power supply network.
Berries group singapore is the manufacturer of activpure photo-catalytic hygiene surface technology. Activpure once coated onto the surface, utilizes visible light energy to eradicate micro-organisms and organic odours. Compared to normal sanitizing chemicals that work only once, activpure once treated on to the surfaces works continuously as long as visible light is present. It provides long lasting sanitizing effect. Activpure were tested by accredited laboratory tuv-sud and also singapore ntu. Reports are available upon request. We are currently looking for distributors for our product. We provide oem services too. Contact me for further discussion.
Tungsten alloy shot is used as the shot for shotgun hunting shells. The pellets spread upon leaving the barrel, and the power of the burning charge is divided among the pellets, which means that the energy of any one ball of shot is fairly low. In a hunting context, the product makes shotguns useful primarily for hunting birds and other small games. Properties of tungsten alloy shot: High density, great hardness and resistance to high temperature make tungsten to be one of the most sought -after material for shotgun pellets in hunting history. Density of tungsten alloy shot is about 18g/cm3, which is comparable only to gold, platinum, or bismuth. To understand how the density factors of tungsten heavy alloy into performance, let us look at two spheres about the same size of tungsten alloy shot, a golf ball and a ping -pong ball. The golf ball is far denser and will fly farther and hit harder. Now shrink the ball size down to two single points, we can get clear comparison graphic. Tungsten alloy will fly farther, hit harder and penetrate deeper. Another unique property of tungsten alloy is that it is non-toxic and environmentally friendly. Therefore, it is safe for people to handle and work. It is our leading products; chentian company can provide tungsten alloy shot as your requirements. Tungsten alloy shot specifications: Diameter: 2.0-15.0mm Density: 18.0-18.2 g/cm3 Composition: w content: 90-95%, w-ni-fe Surface: sintered surface
Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Deli rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage. 1+2 4?? 1+2 4?? The frames Frames are also a feature of the Hunter systems. a larger footprint for stability; steel brake handles that will last forever; dual rod out-feeding positions and wheels inside the frame width. The two smallest sizes feature frames with the feedout built into the handle. All frames can be laid down on either side. These are just some of the design features that will make every unit more usable and friendly for the end user. Rod selectIon Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including: The size of ducting it is to be pushed through The distance the rod is to be pushed The number and tightness of bends in the ducting If the ducting is already occupied by cable When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals. Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod may cause increased friction in the tighter bends.
CAS No: 12069-32-8 ENINEC No: 235-111-5 MF: B4C Grade Standard:General Reagent, Electron Grade Purity:99% Appearance: Grey black Powder Application:nuclear materials, gun nozzles Size:500nm, 1-3um Quality: High Note: We can supply different size products of nano boron carbide b4c powder according to client's requirements.
CAS No: 12033-89-5ENINEC No: 234-796-8 MF: Si3N4 Grade Standard:Industrial, Eletron, IndustrialPurity:99.9%Appearance: Grey white Powder Application: Ceramic material, Thermal spraying Size:100nm, 0.3-0.5um, 0.6-0.8um, 0.8-1um, 2umType:Beta Note: We can supply different size products of Rubber Strength Agent Si3N4 according to client's requirements.
Product Type Particle size Packing Carbon (%) 304 10-300UM 5Kg, 25Kg, 50Kg =0.07 304L 10-300UM 5Kg, 50Kg =0.03 316 10-300UM 5Kg, 25Kg, 50Kg =0.08 316L 10-300UM 5Kg, 50Kg =0.03 403 10-300UM 5Kg, 25Kg, 50Kg =0.15 302 10-300UM 5Kg, 25Kg, 50Kg =0.15 430 10-300UM 5Kg, 25Kg, 50Kg =0.12 17-4PN 10-300UM 5Kg, 25Kg, 50Kg =0.07 420 10-300UM 5Kg, 25Kg, 50Kg 0.3~0.4 317L 10-300UM 5Kg, 50Kg =0.08 410 10-300UM 5Kg, 25Kg, 50Kg =0.15 Note: We can supply different size products of Stainless Steel Powder according to client's requirements.
CAS No: 12070-08-5 ENINEC No: 235-120-4 MF: TiC Grade Standard:General Reagent Purity:99.5% Appearance: Black Powder Application:conductivity Size:40-60nm, 1-3um Quality:High Note: We can supply different size products of titanium carbide TiC nanopowder sale price according to client's requirements.
CAS No: 7782-42-5 ENINEC No: 231-955-3 MF: Grade Standard:Industrial Purity:99.95% Appearance: Black Powder Application:conductive material, lubrication Size:40-50nm, 80-100nm, 1um Shape:Flake Note: We can supply different size products of graphite micron powders according to client's requirements.
CAS No: 7782-42-5 ENINEC No: 231-955-3 MF: Grade Standard:Industrial Purity:99.95% Appearance: Black Powder Application:conductive material, lubrication Size:40-50nm, 80-100nm, 1um Shape:Flake Note: We can supply different size products of graphite micron powders according to client's requirements.
CAS No: 409-21-2 ENINEC No: 206-991-8 MF:SiC Grade Standard:Industrial, Reagent, Electron Purity:99% Appearance: Grey green Powder Application:Cutting Tool area, composite material Size:50nm,80-100nm,0.8um,1-2um,5um,7um,10um,15um Form:Beta Note: We can supply different size products of refractory material sic powder according to client's requirements.
CAS No: 18282-10-5/1309-64-4 ENINEC No: 242-159-0/215-175-0 MF: SnO2, Sb2O3 Grade Standard:General Reagent Purity:99.9% Appearance: Blue Powder Application: conductive material, electrode of solar cell Size:
CAS No: 24304-00-5 ENINEC No: 246-140-8 MF: AlN Grade Standard:Industrial, Eletron, Industrial Purity:99.5% Appearance: Grey white Powder Application: Ceramic material, electronics, coating Size:40nm, 100nm, 1-2um, 5-10um Shape:Hexagonal&irregula crystal Note: We can supply different size products of Nano Aluminum Nitride powder according to client's requirements.
CAS No: 1344-28-1 ENINEC No: 215-691-6 MF:Al2O3 Grade Standard:Industrial, Reagent Purity:99.99% Appearance: White Powder Application:Rubber modified, Ceramics Size:80-100nm Shape:Spherical Form: Alpha Note: We can supply different size products of Nano al2o3 powder according to client's requirements.
CAS No: 1314-13-2 ENINEC No: 215-222-5 MF: ZnO Grade Standard:Industrial Purity:99.8% Appearance: white Powder Application:Rubber modified, Ceramics Size:20-30nm Shape:Spherical Note: We can supply different size products of Nano zinc oxide powder particles according to client's requirements.
CAS No: 14808-60-7 ENINEC No: 231-545-4 MF: SiO2 Grade Standard:Industrial, Reagent Purity:99.8% Appearance: white Powder Application:Paint, rubber, plastic Size:10-20nm, 20-30nm Shape:amorphous Form:Hydrophobic, hydrophilic Note: We can supply different size products of hydrophibic nano silica according to client's requirements.
CAS No: 10043-11-5 ENINEC No: 233--136-6 MF:BN Grade Standard:Industrial, Eletron Purity:99.8%, 99% Appearance: White Powder Application: Ceramic material, thermal spraying Size:80-100nm, 0.8um, 1um, 5um Form:Hexagon crystal Note: We can supply different size products of High Temperature Strength Boron Nitride powder according to client's requirements.
CAS No: 1314-35-8 ENINEC No: 215-231-4 MF: WO3 Grade Standard:Industrial, Eletron, Reagent Purity:99.9% Appearance: Yellow, blue, purple Powder Application: Metal tungsten material, hard alloy, cutting tools Size:50nm Shape:Column Note: We can supply different size products of insulation coating nano wo3 according to client's requirements.
