Introduction
Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks.
We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries.
Product introduction
The rod
Deli rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage. 1+2
4??
1+2
4??
The frames
Frames are also a feature of the Hunter systems. a larger footprint for stability; steel brake handles that will last forever; dual rod out-feeding positions and wheels inside the frame width. The two smallest sizes feature frames with the feedout built into the handle. All frames can be laid down on either side. These are just some of the design features that will make every unit more usable and friendly for the end user.
Rod selectIon Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including:
The size of ducting it is to be pushed through
The distance the rod is to be pushed
The number and tightness of bends in the ducting
If the ducting is already occupied by cable
When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals.
Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod may cause increased friction in the tighter bends.
Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Deli rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage. 1+2 4?? 1+2 4?? The frames Frames are also a feature of the Hunter systems. a larger footprint for stability; steel brake handles that will last forever; dual rod out-feeding positions and wheels inside the frame width. The two smallest sizes feature frames with the feedout built into the handle. All frames can be laid down on either side. These are just some of the design features that will make every unit more usable and friendly for the end user. Rod selectIon Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including: The size of ducting it is to be pushed through The distance the rod is to be pushed The number and tightness of bends in the ducting If the ducting is already occupied by cable When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals. Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod may cause increased friction in the tighter bends.
Compared with conventional casting magnesium alloys, our semi-continuous casting magnesium alloys are finer in the organization, more uniform on the ingredients, and more compact inside. They have higher strength and elongation, and are applied to magnesium alloy processed products, rods, bars, tubes, plates, sheets, wires, etc.. By secondary refining, the magnesium alloys manufactured by yirui company have higher purity and lower impurity. The magnesium liquid is poured directly from the heat holding furnace, and crystallizes rapidly. This improves the compactness of internal microstructure of the magnesium rods. The internal crystal are more compact, and the physical performance is greatly enhanced compared to the conventional casting products.
WIRE RODS, STEEL PLATES, RAIL, SHEET Grades Low Carbon Grades. SAE 1006 / 1008 / 1010 / 1012 / 1015 / 1018 / 1020, CAQ.
Wire rod is a long steel semi-finished product manufactured by hot rolling billets on continuous rolling mills. Wire rod is wrapped around into the coils and also carried in this form size :From 5.5mm to 20mm
Hindalco's copper division operates one of the largest single location customs copper smelter in the world. Hindalco produces copper cathodes, continuous cast copper rods in various sizes. Birla Copper is used in the manufacture of continuous copper rods for wire, cable and transformer industries; and copper tubes for consumer durable goods and other applications in the form of alloys and sheets. The co-product sulphuric acid is used to produce phosphoric acid and value-added fertilisers like di-ammonium phosphate (DAP).
Reheating Furnace fully automated with dual fired burner LPG/LDO.s High-pressure De-scaler. 4-Stand Housing less Roughing Mill in horizontal and vertical combination. 10-Stand Housing less Continuous Mill in horizontal/vertical combination with 8 loopers for tension free rolling and 2 shears for end cutting. 4 Cantilever stands in horizontal and vertical combination with Tungsten Carbide (TC) Rings. 10-Stand V-type, no twist wire rod block. Primary cooling line for controlling laying temperature. Laying head. 70 m long cooling conveyor with retarded, forced cooling and online quenching facility. Pallet type coil handling with vertical compactor. Mill fully automated by ABB drive and PLC. Solution Annealing Furnace. Pickling line with Effluent Treatment Plant. Wendt CNC grinding machine for TC Rings PRODUCT SPECIFICATIONS WIRE ROD a. SIZE RANGE : 5.5 - 32 mm (Wire rod block ) COIL DIMENSIONS : ID: 800 - 900 mm OD: 1250 (wire rod block) TOLERANCE : As per EN 10088 SUPPLY CONDITION: Hot rolled (HR Hot rolled + pickled (HRP) b . SIZE RANGE : (Available in mm) 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 11, 12, 13, 14, 15, 16, 18, 20, 22, 25, 27, 29 and 32 c. Grades: EN, DIN, JIS, ASTM, BS, ASME, AISI, etc. SUPPLY CONDITION : Hot rolled + annealed + pickled (HRAP)
Product Description - Industrial Use Price of product ( USD price or FOB price) - RS 4000.00
Hindalco's copper division, Birla Copper, operates one of the largest single location custom copper smelters in the world. The custom copper smelter at Dahej in the state of Gujarat (west coast of India) houses three copper smelters, three refineries, two rod plants, a captive power plant, a captive oxygen plant, phosphoric acid plant, di-ammonium phosphate plant, precious metal recovery plant, captive jetty and other utilities. One of the new rod plants is under construction and will be operational by end FY18. Hindalco produces LME grade copper cathodes, continuous cast copper rods in various sizes, and precious metals like gold and silver. Hindalco is one of the major manufacturers of 19.6mm diameter copper rods, which is used for railway electrification. The co-product, sulphuric acid, is partly utilised to produce phosphoric acid and fertilisers like di-ammonium phosphate (DAP). Birla Copper's brands, Birla Copper and Birla Copper II, are recognized for their high purity and consistent quality in the domestic as well as global markets. Birla Copper is an ISO 9001, 14001, 27001, 50001 and OHSAS 18001 certified company, registered on the London Metal Exchange as Grade-A copper brand, and certified as a Star Trading House having labs for chemical, mechanical and electrical testing accredited by the National Accreditation Board for Laboratories (NABL).
Supplier: Copper tube, cable lugs, rod and bar, strip, fitting, terminal & electric connectors, brassware, metal processing machinery including: horizontal continuous casting, semi-continuous casting line, inner-grooved machine, 84" bullblock, tube reducer, level wound machine
Buyer: Dies, tools
