Hgit as the shape of the fixture glue injection system (suitable for two-color aluminum profile injection process)
As the shape of the fixture glue injection system is an aluminum thermal barrier system manufactured by our company after innovatively design. This system fixes and locks two different pieces of aluminum profiles from indoor and our door separately by semi-automatically as the shape of the fixture, and then pour the polyurethane insulation glue into the reserved notch, after curing, and leaves the fixture to complete the injection technology. This technology cannot only realize the two-color, monochrome random combination of aluminum profiles, but also it can finish from pouring the glue, curing to the finished products aluminum thermal profiles by one step. This process not only controls the geometry of the aluminum profiles precisely, but it is very stable and efficient, it can save material, manpower and electric power, it is environment friendly and with no noise. Meanwhile, it rewrites the history that glue injection profiles cannot make double-color door and window.
Voltage: 380v; total power: 10kw; processing ability: 30-48m (depending on space width)
Metal Injection Molding (MIM) is a high-tech near net shape technology to mass production of small metal parts with complex shape, high precision and performance requirement. MIM technology has its advantages over traditional powder metallurgy, machining, investment casting, and other alternative methods. MIM parts can now be found in all areas of life, from our cars and trucks to watches, dental braces, mobile phones, IT equipment, DIY tools and much more.
MIM Unique Process:
-Mixing Powder(metal powder and binder)
-Injection Molding
-Debinding
-Sintering
-Post Treatment(sizing, machining, heat treatment, plating)
Magnet Materials:
1)NdFeb material(Sintered and Bonded)
2)Hard Ferrite(Sr Ferrite and Ba Ferrite)
3)SmCo(1:5 and 2:17)
4)AlNiCo(Casting and Sintering)
5)Rubber Magnet
6)Soft Magnet(Mn-Zn and Ni-Zn)
7)Injection Magnet(NdFeB and Ferrite)
Surface Treatment:
1)Plating (Ni, Zn, Cr,Cu,A.)
2)Coating(Epoxy Resin)
3)Spray Coating(Epoxy Resin)
Our Main Product List:
1. Bonded NdFeB Magnets
2. Sintered NdFeB Magnets
3. Ferrites
       > Sintered Hard Ferrite
       > Soft Ferrite-MnZn ferrite
       > Soft Ferrite-NiZn ferrite
4SmCo Magnets
5Cast and Sintered AlNiCo Magnets
117514 Metal Metal Products Suppliers
Short on time? Let Metal Metal Products sellers contact you.
Powder Metallurgy (Metal compression molding) is the most cost effective of a number of possible options for making the part.
* Very high and uniform purity can be easily achieved
* the simple fabrication process retains purity
* Grain size is easily controlled
* No deformation is needed to produce directional elongation of grains
* Void density can be controlled
* Objects can be created in any shape
* Shapes can be produced that not be made by any other process
PM material refer to MPIF standard 35
No. class common grade
1 Iron and Carbon Steel F-0000 F-0005 F-0008
2 Iron-Copper and Copper Steel FC-0205 FC-0208 FC-0508
3 Iron-Nickel and Nickel Steel FN-0205 FN-0208 FN-0405
4 Prealloyed Steel FL-4205 FL-4605 FL-5208
5 Hybrid Low-Alloy Steel FLN2C-4005 FLN2-4405 FLNC-4405
6 Sinter-Hardened Steel FLN2-4408 FLNC-4408 FLC2-4808
7 Diffusion-Alloyed Steel FD-0205 FD-0405 FLDN2-4908
8 Copper-Infiltrated Iron and Steel FX-1005 FX-2005 FX-2008
9 Copper and Copper Alloys CZP-1002 CZ-3000 CT-1000
Surface Heat Treatment(Surface carburizing, nitriding, carburizing and high frequency quenching)
-Black Oxide Finish
-Immersion Oil
-Electroplating
CPT-190 Table Model Magnetic Compass
CPT-190 Magnetic Compass is a sort of table model liquid magnetic compass . It is used for the middle and small vessels acting as steering compass . The compass is a magnetic compass class A and it is designed and manufactured on the basis of the national standard GB/T 14108-93 ( General Technical Terms of Marine Magnetic Compass Class A ),its technical performance index are completely in accordance with the national standard. The product has the advantages of beautiful outline,high precision,convenient correcting difference,steady performance and legible lighting etc. It is the essential navigation instrument for the middle and small vessels.
Product Name
Micromoto spot welding electrode head
Material
Tungsten and molybdenum
Service life
30-100thousand
Packing
Carton
Delivery
3-10day
Payment
T/T, Paypal
Applicable
Application of medical devices in welding, such as welding, the burning tools, Pacemaker welding, catheter welding , hearing aid welding and other key parts of medical products welding.
Designation by Standards
Mat. No. DIN EN AISI
1.2746 45NiCrMoV16-6 - -
Chemical Composition (in weight %)
C Si Mn CrMo Ni VWOthers
0.450.250.701.500.794.000.50 - -
Description
Special cold work tool steel, air or oil hardenable with highest toughness.
Applications
Forging tools, dies of all sorts, shapes and sizes, hot forging and pressing tools for steel and metal. Moulds, bushings, piercers, etc.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.86
Soft Annealing
Heat to 610-850oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 295.
Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to approx. 650oC, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening
Harden from a temperature of 880-910oC followed by air or oil quenching or warm bath quenching 180-220oC. Hardness after quenching is 56 HRC.
Tempering
Tempering temperature: See the data bellow.
Tempering Temperature (oC) vs. Hardness (HRC)
100oC200oC300oC400oC500oC550oC
565452504948
Tempering Diagram
Click the image to enlarge the diagram.
Forging
Hot forming temperature: 1100-900oC.
Machinability
No data.
Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available
.Specifications of carbon steel plate
Round bar
Diameter(mm) length (mm)
10~800 300~5800
Plate thickness(mm) width (mm) length (mm)
Max:800 205~810 2000~4000
2.Chemical compositon(%) of carbon steel plate
C mn s i cr nicu s p
0.42~0.500.5~0.80.17~0.370.250.30.250.0350.035
3.Delivery condition and heat treatment
Forging normalization hardening subcritical annealingisothermal annealing tempering
1100~850* 840~880 820~860 water 650~700* 820~860
600x1h* 550~660
4.Characteristic of carbon steel plate
Nice machanical porpertys and worse hardenability, so, it is used for machine parts.
5.Application of carbon steel plate
1): can be used in many fields such as building, automobile, shipbuilding,
Petrochemical, machinery, medicine, food, electric power, energy, space, building
And decoration, etc.
2): can be made into mould template, mortise pin, column
3): this kind of steel have good mechanical property, is widely used in structural
Parts which may support stress alternation, especially made into some connecting
Rods, bolts, wheel gear...
4): this kind of steel is the most common blanks and materials of shaft part.
4 cr13 characteristics after quenching than 3 cr13 high hardness, good corrosion resistance
Application :
Rj, nozzle, valve seat, etc. 1 cr17ni2 features strong resistance to corrosion of nitric acid and organic acid. Use used for high hardness and high wear resistance of hot oil pump, valve, valves, bearings, medical equipment, spring, etc
Name:1.2345 steel round bar
Place of origin:hubei, china
Brand name:better
Shape:round bar
Material:tool steel
Steel grade:1.2345
Application:used to making important parts like hot-extrusion die, hammer forging die, aluminium alloy casting, etc.
Chemical composition
C si p s cr mo mn
0, 48 - 0.53 0, 90 - 1, 20 0.20 - 0, 40 max. 0, 030 max. 0, 030 4, 80 - 5, 20 1, 20 - 1, 50
Packing&delivery:
Packaging details: according to customer's requirements or export's standard
Delivery time: in 45-60 days after we receive 30% deposite
Port: wuhan or according to your requirements
Moq: 3 ton or according to your requirements
Trade terms exwfob/cfr/cif or according to your requirements
Standard:
Astmusaameirican society of mechanical engineers
Aisiusaacronym of american iron and steel institute
Jisjpjapanese industrial standards
Dingerdeutsches institutr normung e.V.
Unsusaunified numbering system
Hot rolled craft with good mechanical performance, all the bars are prime quality with canonical certificate.
Name:1.2345 steel round bar
Place of origin:hubei, china
Brand name:better
Shape:round bar
Material:tool steel
Steel grade:1.2345
Application:used to making important parts like hot-extrusion die, hammer forging die, aluminium alloy casting, etc.
Chemical composition
C 0, 48 - 0.53
Si 0, 90 - 1, 20
Mn 0.20 - 0, 40
P max. 0, 030
S max. 0, 030
Cr 4, 80 - 5, 20
Mo 1, 20 - 1, 50
Mechanical property
Heat treatmentmechanical propertycondition of deliveryhrc
Hardening heat hardening mediatemperatureyield strength/mpatensile strength /mpaelongationreduction of area
Hot rolled/forge
60
Packing&delivery:
Packaging details: according to customer's requirements or export's standard
Delivery time: in 45-60 days after we receive 30% deposite
Port: wuhan or according to your requirements
Moq: 3 ton or according to your requirements
Trade terms exwfob/cfr/cif or according to your requirements
Standard:
Astmusaameirican society of mechanical engineers
Aisiusaacronym of american iron and steel institute
Jisjpjapanese industrial standards
Dingerdeutsches institut normung e.V.
Unsusaunified numbering system
Hot rolled craft with good mechanical performance, all the bars are prime quality with canonical certificate.
117514 Metal Metal Products Suppliers
Short on time? Let Metal Metal Products sellers contact you.
