Find Verified Metal Metal Products Suppliers, Manufacturers and Wholesalers

Addition cure Electronic Potting Silicone Rubber

1. Product Feature of Addition cure Electronic Potting Silicone Rubber
Electronic Potting Silicone Rubber is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate)ã?�PPã?�ABSã?�PVC, etc. and metal materials.

2. Typical Application of Addition cure Electronic Potting Silicone Rubber
HY-9055 electronic potting silicone rubber could be applied to
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.


3. Technical Guidelines of of Addition cure Electronic Potting Silicone Rubber
a, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
b, Mixing Ratio: part A: part B = 1:1
c, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.


4.Notes of Addition cure Electronic Potting Silicone Rubber
a.The following material may hinder the curing of HY-9055, So pls use after the test. When necessary, pls clean the application areas.
Organotin compound or Condensation silicone with organotin
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Pewters solder flux
b. HY-9055 should be sealed storage.The mixture should be used up disposably to avoid causing waste.
c. HY-9055 belongs to non-dangerous goods, but keep away from mouth and eyes.
d. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.


PACKAGE
40Kg/pail as a set (Part A 20Kg + Part B 20Kg)


SHELF LIFE AND TRANSPORTATION
1. Twelve(12) months when stored at 24C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

-

Platinum Cure Silicone Foamsfor filling
Description of Platinum Cure Silicone Foams for filling
Platinum Cure Silicone Foams is a soft, two-component platinum silicone flexible foam that is versatile and easy to use. HY-F663 Platinum Silicone Foams expands 3.5 times its original volume and develops a uniform 20 lb./cu. ft. cell structure (320 kg/m3). Vibrant colors can be achieved by adding Silc-Pigsilicone color pigments. Cured foam is high heat resistance (will resist up to 350°F/176°C), water resistant, UV resistant and resists oxidation and ozone degradation.

Typical Applications for Platinum Cure Silicone Foams for filling
Platinum cure Silicone Foams can be used for a variety of industrial and special effects applications including making foam filled appliances, padding/seat cushioning, orthotics/orthopedics, potting and encapsulation of electrical circuits and vibration dampening.


Technical Parameters
Product HY-F663
Appearance white
Mix ratio(A:B) 1:1/10:1
Mixed Viscocity �mPa.s� 15000±2000
Pot life/working time (mins) 5-8
Curing time/setting time (mins) 40
Shrinkage rate ï¼?%ï¼? 0.1
Approx. volumetric expansion 3.5 times
Lbs./Cu. Foot=Kgs./Cu.meter 20 lb/ft3 = 320 kg/m3


PROCESSING RECOMMENDATIONS of Platinum Cure Silicone Foams for filling silicone products

Store and use at room temperature (73°F/23°C). These products have a limited shelf life and should be used as soon as possible. Good room size ventilation is essential. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.

Cure Inhibition - Addition cured silicones may be inhibited by certain contaminants such as sulfur, polyesters,certain wood surfaces, epoxies, urethane rubber and tin catalyzed silicones resulting in tackiness at the pattern interface or a total lack of cure throughout the mold. If compatibility between the rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount of foam onto a non-critical area of the pattern.Inhibition has occurred if the matrerial is gummy or uncured after the recommended cure time has passed. This product will not cure against tin-based silicone rubbers.

Applying A Release Agent - Silicone Foams will stick to some surfaces and a release agent may be necessary to facilitate demolding. When casting Silicone Foams into or over other platinum silicones, apply Ease Release 200 prior to applying foam.


SHELF LIFE:
8-10 months when stored under 24â?? in original unopened packages.
PACKAGE:
Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.

-

Sudarshan is an organic certified insecticide from krishidoot bio herbals, a house of organic derived from plant pectin. By foliar spray of sudarshan we can protect plant/crop from mealy bug and all type of sucking insect. Sudarshan is biodegradable organic certified insecticide and formulated for plant protection under the integrated pest management. Sudarshan also act as a repellent from fungal, viral, and bacterial attack. It is zero residue product.

Dosages : 2 to 4ml per liter for foliar applications.

Features :

Organic, environment friendly, bio-degradable and economical.
Non-toxic but little toxicity may be shown to fishes.
Easily kills all the generations, even the eggs, of insects and mites.
An effective tool for integrated pest & diseases management (ipdm).
It is not compatible with sulphur, captan and dimethoate etc.

Packaging : available in 500 ml, 1 lit, 5 lit, 20 lit, 50 lit, 200 lit hdpe bottles/drums.


Details :

An organic pesticide
Foliar spray
Organic pesticides
Organic insecticides

Quick Details
Table Decoration & Accessories Type:
Mats & Pads
Material:
Silicone
Feature:
Eco-Friendly
Place of Origin:
Guangdong, China (Mainland)
Brand Name:
lifetop
Model Number:
felt glass coaster
Item:
felt glass coaster
Color:
any color in pantone
Packaging:
poly bag or customized
Logo:
customized
MOQ:
1000 pcs
Certification:
FDA LFGB
Sample:
available
weight:
15g
size:
Dia80mm
material:
silicone

Quick Details
Use:
Credit Card
Material:
PVC
Brand Name:
lifetop
Model Number:
card holder rfid
Item:
card holder rfid
Color:
any color in pantone
Packaging:
poly bag or customized
Logo:
customized
MOQ:
500 pcs
Certification:
FDA LFGB
Sample:
available
weight:
30g
size:
95*58*6mm
material:
silicone

Quick Details
Type:
Baking & Pastry Tools
Baking & Pastry Tools Type:
Baking & Pastry Spatulas
Material:
Metal
Certification:
FDA, LFGB, FDA LFGB
Feature:
Eco-Friendly
Place of Origin:
Guangdong, China (Mainland)
Brand Name:
lifetop
Model Number:
icing spatula
Item:
icing spatula
Color:
dark red and silver
Packaging:
poly bag
Logo:
customized
MOQ:
100sets
Sample:
available
weight:
18g,58g,61g,91g
size:
4inch,6inch,8inch,10inch
material:
wood and stainless steel

Quick Details
Place of Origin:
Guangdong, China (Mainland)
Brand Name:
lifetop
Model Number:
Exercise Hand-muscle Developer
Item:
Exercise Hand-muscle Developer
Color:
yellow,blue,geen,orange
Packaging:
poly bag or customized
Logo:
customized
MOQ:
500 pcs
Certification:
FDA LFGB
Sample:
available
weight:
L:97G, S:45G,mini:40g
color-poundage:
yellow-40LB,blue-50LB,green-60LB,orange-70LB
Material:
silicone


Item Name Personalized Heat Resistant Anti-slip silicone felt glass coaster
Material 100%food grade silicone
Color any color in pantone
Feature
1.Eco-friendly,harmless,non-toxic
2.Working temperature:-40-230 C
3.Easy to clean and suitable to use
4.Logo can be printed,embossed,debossed
MOQ1000 pcs
Package
1.Inner packaging:1pc/opp bag
2.Outer packaging:carton
Custom package acceptable
CertificateFDA;LFGB;ROHS,
Payment\T/T;L/C;Western Union
Delivery15 to 20 days

Quick Details
Type:
Baking & Pastry Tools
Baking & Pastry Tools Type:
Baking & Pastry Spatulas
Material:
Metal
Certification:
FDA, LFGB, FDA LFGB
Feature:
Eco-Friendly
Place of Origin:
Guangdong, China (Mainland)
Brand Name:
lifetop
Model Number:
icing spatula
Item:
icing spatula
Color:
dark red and silver
Packaging:
poly bag
Logo:
customized
MOQ:
100sets
Sample:
available
weight:
18g,58g,61g,91g
size:
4inch,6inch,8inch,10inch
material:
wood and stainless steel

We supply Sulphur granular / Prill in bulk as well as containerize packing.