Metal Metal Products Suppliers and Manufacturers

Product Description Magnetic materials are fundamental functional materials of electronic industry. As important parts of magnetic materials, hard ferrite materials play a heavyrole in electronic industry, electronic information industry, car industry, motorcycle industry etc. meanwhile, they are also widely used in medical treatment, mining and metallurgy, industrial automation, oil energy industry and civil industry. ferrite magnet, ferrite magnets, bonded ferrite magnet, barium ferrite magnet, hard ferrite magnet, sintered ferrite magnet, bonded ferrite injection magnet Our main products includes :hard ferrite arc or segment, ring magnets, rectangular magnets, ferrite power etc. Which have the following advantages: high coercive force, high electric resistance, long-time stability, and economical price. Meanwhile, we can manufacture new tools according to the customers` demand. ferrite magnet, ferrite magnets Additional Info Brand: CBNB Transportation: Ocean,Land,Air Place of Origin: China

Product Description SmCo magnets, are composed of Samarium, Cobalt, and a few transition metals. SmCo magnets are high performance, low temperature coefficient rare earth permanent magnets, and could keep their performance under the maximum working temperature 350 degree centigrade. Manufacturing Process Samarium, Cobalt, and a few transition metals will be made into the SmCo powder, then fine SmCo powder will be compacted in a die and sintered, fusing the powder into a solid material. There are 2 forms of pressing: die pressing and isostatic pressing. Sintered parts normally need some finish machining in order to meet final tolerances. Machining & Tolerance Generally, SmCo magnets must be machined using diamond-grinding techniques. Sometimes, machining operations may be performed on SmCo materials using carbide tools, but surface finishes thus obtained may be less than optimal. The Standard tolerances for SmCo magnets are +/- 0.1mm for ground dimensions, but sticter tolerances are possible if specially required. Surface treatments The corrosion resistance of SmCo magnets is considered good. Although Surface coating or plating is not generally required for SmCo magnets, all kinds of surface coating are also available, like Nickel, Zn, Ni-Cu-Ni, Gold, Silver, Sn,Chrome, ABS coating, Rubber coating, PTFE(Telfon) coating, stainless steel case, etc. Magnetizing & Packing SmCo magnets require extremely high magnetizing fields, and can be magnetized in any direction as long as it is aligned properly. In some instances multiple pole magnetization is possible with special fixtures. All SmCo magnets are anisotropic, and can only be magnetized in the orientation direction, so particular consideration must be given to this when designing complex assemblies, if it is intended to magnetize after assembly. SmCo magnets are mechanically weak, and magnetically very strong. They should be packed properly in order to help user to use and handle them. Additional Info Brand: CBNB Transportation: Ocean,Land,Air Place of Origin: China

Product Description Alnico magnet assemblies,sintered alnico magnet are available in various models and used in odometer of automobile and motorcycle. High Performance Alnico Magnets are composed primarily of Cobalt, Nickel, and Aluminum with the addition of Iron, Copper, and sometimes Titanium that helps make them become stronger permanent magnets. They can be magnetized to produce strong magnetic fields. Alnico magnets produce magnetic fields with strength at their poles as high as 1500 gauss, or about 3000 times the strength of the earth's magnetic field. Cast Alnico can be processed to be intricate and complex shapes to meet customer's demand .Some types of Alnico are isotropic, meaning they can be efficiently magnetized in any direction. Other types, such as Alnico 5 and Alnico 8 are anisotropic, meaning they have a preferred direction of magnetization, orientation. Anisotropic magnets generally have a greater magnetic capacity in their preferred orientation than isotropic. Anisotropic Alnico magnets are oriented by heating them above a critical temperature, and cooling them in the presence of a magnetic field. Unlike casted Alnico magnets, sintered Alnico magnets offer lower magnetic properties but better mechanical characteristics. Mixes of metal powders are pressed to shape and size, and then sintered at 2300oF in a hydrogen atmosphere. The sintering process is well suited to large volume production, and results in parts that are structurally stronger than cast magnets. Relatively close tolerances can be achieved without grinding. But both are hard and brittle materials. They require skillful machining that is best performed on specialized equipment. Applications: 1. Measuring instruments 2. Flywheel generators and sensors 3. Stepping motor and relays 4. Flow and AVO meter 5. Odometer of automobile and motorcycle 6. Buzzer of mobile phone Additional Info Brand: CBNB Transportation: Ocean,Land,Air Place of Origin: China

Product Description NdFeB Magnet is the most powerful commercially produced magnets. · NdFeB Magnet has a higher Maximum Energy Product, (BH).max, which can easily reach 30 MGOe and even goes up to 50 MGOe. · NdFeB Magnet can replace SmCo Magnets in most cases, especially where operating temperature is less than 80 degrees Centigrade. · NdFeB Magnet has very high strength. · Relatively low cost. · Compared to Alnico and SmCo magnets, relatively easy to machine Additional Info Brand: CBNB Transportation: Ocean,Land,Air Place of Origin: China

Rk aluminum stage can be used indoors or outdoors, in the rain, at the beach, on a sloped hill or just about anywhere you can imagine! It features Variable height options 16"/24"/32", 24"/32/40", 32"/40"/48", 40"/48"/60" Available in both weather resistant and waterproof finishes. Can be set-up on uneven ground (each aluminum stage leg adjusts independently). Lightweight, durable and rugged aluminum construction. Modular design (aluminum stage platforms come in 4'x4' sections) allows the aluminum stage to be expanded or configured as needed. Stairs, guardrails and skirting are available to go with the aluminum stage. Can be configured in various heights and configurations to form chair risers and choral risers, seating risers, or other audience risers.

As well as a very easy to use portable stage system, rk aluminum stage can also provide solutions for applications, such as podiums, catwalks, rostrums, tiered seating areas, tiered staging areas, raised flooring, drum risers, exhibition stands and many others.

Waterproof ip65 led profile ej1910 Good day! eonjoy lighting, one manufacture located in guangdong, specialized in led strips, led profiles, led dimmers.Ect indoor lighting. The hottest ip65 waterproof led alu profile-ej1910 with following features: Newest alu profile for indoor decoration/lighting. Standard length 0.5/1.5/2/2.5/3m Special length available Inner width for 12.5mm led strips Matirial 6063 t3-t8 anodized aluminum profile Cover material pc Cover model clear/milky Accessorries metal end cap and mounting clip Very competitive prices based on top quality and shorter lead time. Welcome inquiry and order.

Channel steel We are supplier of channel steel. There are many sizes for your choice.

Angle steel

H beam We are supplier of h beam there are many sizes for your choice.

Magnet materials: 1)ndfeb material(sintered and bonded) 2)hard ferrite(sr ferrite and ba ferrite) 3)smco(1:5 and 2:17) 4)alnico(casting and sintering) 5)rubber magnet 6)soft magnet(mn-zn and ni-zn) 7)injection magnet(ndfeb and ferrite) Surface treatment: 1)plating (ni, zn, cr, cu, ar¦.) 2)coating(epoxy resin) 3)spray coating(epoxy resin) 1. Bonded ndfeb magnets 2. Sintered ndfeb magnets 3. Ferrites > sintered hard ferrite > soft ferrite-mnzn ferrite > soft ferrite-nizn ferrite 4 smco magnets 5 cast and sintered alnico magnets

Magnet materials: 1)ndfeb material(sintered and bonded) 2)hard ferrite(sr ferrite and ba ferrite) 3)smco(1:5 and 2:17) 4)alnico(casting and sintering) 5)rubber magnet 6)soft magnet(mn-zn and ni-zn) 7)injection magnet(ndfeb and ferrite) Surface treatment: 1)plating (ni, zn, cr, cu, a.) 2)coating(epoxy resin) 3)spray coating(epoxy resin) 1. Bonded ndfeb magnets 2. Sintered ndfeb magnets 3. Ferrites   > sintered hard ferrite   > soft ferrite-mnzn ferrite   > soft ferrite-nizn ferrite 4.Smco magnets 5.Cast and sintered alnico magnets

Hgit as the shape of the fixture glue injection system (suitable for two-color aluminum profile injection process) As the shape of the fixture glue injection system is an aluminum thermal barrier system manufactured by our company after innovatively design. This system fixes and locks two different pieces of aluminum profiles from indoor and our door separately by semi-automatically as the shape of the fixture, and then pour the polyurethane insulation glue into the reserved notch, after curing, and leaves the fixture to complete the injection technology. This technology cannot only realize the two-color, monochrome random combination of aluminum profiles, but also it can finish from pouring the glue, curing to the finished products aluminum thermal profiles by one step. This process not only controls the geometry of the aluminum profiles precisely, but it is very stable and efficient, it can save material, manpower and electric power, it is environment friendly and with no noise. Meanwhile, it rewrites the history that glue injection profiles cannot make double-color door and window. Voltage: 380v; total power: 10kw; processing ability: 30-48m (depending on space width)

Metal Injection Molding (MIM) is a high-tech near net shape technology to mass production of small metal parts with complex shape, high precision and performance requirement. MIM technology has its advantages over traditional powder metallurgy, machining, investment casting, and other alternative methods. MIM parts can now be found in all areas of life, from our cars and trucks to watches, dental braces, mobile phones, IT equipment, DIY tools and much more. MIM Unique Process: -Mixing Powder(metal powder and binder) -Injection Molding -Debinding -Sintering -Post Treatment(sizing, machining, heat treatment, plating)

Fully Machining Services: CNC Machining, CNC milling and turning parts , CNC milling parts, CNC lathe turning parts, grinding parts, stamping parts, casting and forging parts, assembly service. Surface Finishes:  Anodizing, Electroplating, Mechanical Polish, Electro Polishing, E-coating, Polishing, Powder Coating, Blacken, Hardening, Painting etc.

Fully Machining Services:  CNC Machining, CNC milling and turning parts , CNC milling parts, CNC lathe turning parts, grinding parts, stamping parts, casting and forging parts, assembly service.   Surface Finishes:  Anodizing, Electroplating, Mechanical Polish, Electro Polishing, E-coating, Polishing, Powder Coating, Blacken, Hardening, Painting etc.

Magnet Materials: 1)NdFeb material(Sintered and Bonded) 2)Hard Ferrite(Sr Ferrite and Ba Ferrite) 3)SmCo(1:5 and 2:17) 4)AlNiCo(Casting and Sintering) 5)Rubber Magnet 6)Soft Magnet(Mn-Zn and Ni-Zn) 7)Injection Magnet(NdFeB and Ferrite) Surface Treatment: 1)Plating (Ni, Zn, Cr,Cu,A.) 2)Coating(Epoxy Resin) 3)Spray Coating(Epoxy Resin) Our Main Product List: 1. Bonded NdFeB Magnets 2. Sintered NdFeB Magnets 3. Ferrites         > Sintered Hard Ferrite         > Soft Ferrite-MnZn ferrite         > Soft Ferrite-NiZn ferrite 4SmCo Magnets 5Cast and Sintered AlNiCo Magnets

Magnet Materials: 1)NdFeb material(Sintered and Bonded) 2)Hard Ferrite(Sr Ferrite and Ba Ferrite) 3)SmCo(1:5 and 2:17) 4)AlNiCo(Casting and Sintering) 5)Rubber Magnet 6)Soft Magnet(Mn-Zn and Ni-Zn) 7)Injection Magnet(NdFeB and Ferrite) Surface Treatment: 1)Plating (Ni, Zn, Cr,Cu,Ar?¦.) 2)Coating(Epoxy Resin) 3)Spray Coating(Epoxy Resin) Our Main Product List: 1. Bonded NdFeB Magnets 2. Sintered NdFeB Magnets 3. Ferrites         > Sintered Hard Ferrite         > Soft Ferrite-MnZn ferrite         > Soft Ferrite-NiZn ferrite 4. SmCo Magnets  5. Cast and Sintered AlNiCo Magnets

Powder Metallurgy (Metal compression molding) is the most cost effective of a number of possible options for making the part. * Very high and uniform purity can be easily achieved * the simple fabrication process retains purity * Grain size is easily controlled * No deformation is needed to produce directional elongation of grains * Void density can be controlled * Objects can be created in any shape * Shapes can be produced that not be made by any other process PM material refer to MPIF standard 35 No. class common grade 1 Iron and Carbon Steel F-0000 F-0005 F-0008 2 Iron-Copper and Copper Steel FC-0205 FC-0208 FC-0508 3 Iron-Nickel and Nickel Steel FN-0205 FN-0208 FN-0405 4 Prealloyed Steel FL-4205 FL-4605 FL-5208 5 Hybrid Low-Alloy Steel FLN2C-4005 FLN2-4405 FLNC-4405 6 Sinter-Hardened Steel FLN2-4408 FLNC-4408 FLC2-4808 7 Diffusion-Alloyed Steel FD-0205 FD-0405 FLDN2-4908 8 Copper-Infiltrated Iron and Steel FX-1005 FX-2005 FX-2008 9 Copper and Copper Alloys CZP-1002 CZ-3000 CT-1000 Surface Heat Treatment(Surface carburizing, nitriding, carburizing and high frequency quenching) -Black Oxide Finish -Immersion Oil -Electroplating

Magnet Materials: 1)NdFeb material(Sintered and Bonded) 2)Hard Ferrite(Sr Ferrite and Ba Ferrite) 3)SmCo(1:5 and 2:17) 4)AlNiCo(Casting and Sintering) 5)Rubber Magnet 6)Soft Magnet(Mn-Zn and Ni-Zn) 7)Injection Magnet(NdFeB and Ferrite) Surface Treatment: 1)Plating (Ni, Zn, Cr,Cu,Ar?¦.) 2)Coating(Epoxy Resin) 3)Spray Coating(Epoxy Resin) 1. Bonded NdFeB Magnets 2. Sintered NdFeB Magnets 3. Ferrites      > Sintered Hard Ferrite      > Soft Ferrite-MnZn ferrite      > Soft Ferrite-NiZn ferrite 4. SmCo Magnets 5. Cast and Sintered AlNiCo Magnets