Find Verified Metal Alloys Suppliers, Manufacturers and Wholesalers

Supply of several non-ferrous cast alloys in the shape of ingots, The alloys available include:
1)Aluminum alloys
Pure A1 , Al- Si, Al-Mg , . etc.
2)Copper alloys
Pure Cu, Cu-Zn
3)Zn alloys
4)Pure Lead and lead alloys.
Specification of the supplied ingots.
1.Sizes in the range of :
Al65178 Cm
Cu4677 Cm
2.Weights:
Al12 Kg
Cu14 Kg
Zn10 Kg
Pb50 Kg
Moreover, alloys with specific chemical composition could be supplied according to the customer request.

. Technical terms: USED RAIL R50-R65
2. Specifications and Chemical
Composition:
Used Rail: R50 (51.67KG/Meter, GOST 7173-55),
Used Rail: R65 (64.72KG/Meter, GOST 8161-75).
Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyera s instruction; Expenses on seller
Width: 5.5 inches ; Weight: 64.72Kg.
No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight.
No pitting.
Only atmospheric rust
No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.

C: 0.54-0.8%
Si: 0.18-0.40%
Mn: 0.60-1.05%
S: 0.04% Max
P: 0.035% Max

Used rails R50-R65 Under 200-202
International Standard ISRI Code 27-29 R50 R65
Harmonization System (HS) Code : 730210

Application : Industrial
Type : With Ballast, Continuous Longitudinally Supported Track, Ballastless
Gauge Length : Broad, Meter, Narrow
Usage : Crane, Railway
Recyclable : Yes
Color : Rust Color
Material : Heavy Melting Scraps

SPECIFICATIONS:

the following Percentage Points:

Chemical Composition

Carbon - 0.54 to 0.82%

Phosphorus - 0.035% max

Manganese - 0.60 to 1.05%

As. - 0,01max of Mass share

Silicone - 0.18 to 0.40%

Sulphur - 0.035% max

Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75

The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m)

Used Rails shall be considered free of alloys when the residual alloying elements do not exceed

Cut to 1.5 meter length (standard)



1. Technical terms: USED RAIL R50-R65
2. Specifications and Chemical
Composition:
Used Rail: R50 (51.67KG/Meter, GOST 7173-55),
Used Rail: R65 (64.72KG/Meter, GOST 8161-75).
Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller
Width: 5.5 inches ; Weight: 64.72Kg.
No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight.
No pitting.
Only atmospheric rust
No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.

We engage in metal materials, metal products, steel products, i.e. ferrosilicon, titanium
iron, silicon ferrozirconium, ferrovanadium, ferrowolfranium, mg-ferrosilicon-rare-earth
alloy, ferromolybdenum, ferrochromium products, ferromanganese products; non-ferrous metal
products, i.e. stibium ingot, silicon-calcium, silicon manganese, zinc-alum alloy, zinc
ingot, lead ingot, chrome powder, magnesium ingot, aluminium ingot/ coil/ can/ scrap,
copper ingot/wire/ sheet/ scrap, Plastic and Polymer Scrap, Plastic Raw Material Granules,
Rubber Scrap, Paper Scrap, etc.


Chemical Composition:
C:0.06 - 0.082%
Mn:0.75 - 1.05%
SI:0.13 - 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15%


HMS 1 / 2 STEEL METAL SCRAP FOR SELL:

Iron Scrap HMS1 & 2
C:0.06 - 0.082%
Mn:0.75 - 1.05%
SI:0.13 - 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15%

HMS 1 / 2 STEEL METAL SCRAP FOR SELL:

Iron Scrap HMS1 & 2
C:0.06 - 0.082%
Mn:0.75 - 1.05%
SI:0.13 - 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15%

C: 0.54-0.8%
Si: 0.18-0.40%
Mn: 0.60-1.05%
S: 0.04% Max
P: 0.035% Max

Used rails R50-R65 Under 200-202
International Standard ISRI Code 27-29 R50 R65
Harmonization System (HS) Code : 730210