For price, specification and other details please contact us
Car headlight OEM CDH-933 12V 55W Slim HID Xenon Ballast 1.Xenon spec. 1)Dimension 85.5x72.5x28mm 2)N.W 350�20g 3)Power 55�2W 4)Input voltage range 9~16V 5)Rated voltage 12.5V 6)Start Current 4.5A 7)Hot light up current 4.5A 8)Max. start voltage 23kV 9)Working Current 4.5A 10)Working temperature -40~ 105�C 11)Lifetime 50,000H 12)Holder's N.W 14G 13)Scope of application 98% Cars 14)Defect Rate Less than 1% 2.Car lamps advantage: 1)Over / low-current protection 2)Voltage output overload / low protection 3)Thunder resistance 4)High safety 5)Short-circuit protection: Auto protect 0.5 second after short-circuit 6)Open protection: Auto protect 0.5 second after open-circuit 7)High voltage protection :more than 16.5V closeless than 16V open 8)Low voltage protection:less then 6.5V close more than 8.5V open 9)Reverse Protection:Auto Protect in 1second after Reverse connection 3. HID submitted following tests: 1) 2-3hours continuous working aging test. 2) Connection circuit protection test. 3) Lack of voltage protection test. 4) Over voltage protection test. 5) Flash light concussion test. 6) Quakeproof capability test. 7) Cold & warm boot test. 8)Polarity protection test. 9)Short-Circuit protection test. Aging Test: (Height simulation of the internal engine temperature of the car for adjustment test) 4.Packing details: 1)White box Size 13*8*4.5CM 2)CTN Size 41.5*23.5*27.5CM(50Pcs) 3)CTN G.W about 16KG 6.Fit Most Car lamps: 1)H Series(Single Bulbs) H1,H3,H4,H7,H8/H9/H11,H10,H13,H15,H16/5202 etc 2)900 Series 9003/H4 ,9004/9007,9005/HB3,9006/HB4 etc 3)A HID and A Halogen H4-2,H13-2,9004/9007-2 etc 4)Bi-xeon bulbs(With wire relays) H4-3/H4 H/L, H13-3/H13 H/L, 9004/9007 H/L etc More details pls call us,thank you. Mid to High-end markets! CDHlighting-13years Manufacturer and trading for Xenon/LED Headlights,LED DRL,HID projector lens etc car lights in China!
Car headlight OEM CDH-933 12V 55W Slim HID Xenon Ballast 1.Xenon spec. 1)Dimension 85.5x72.5x28mm 2)N.W 350±20g 3)Power 55±2W 4)Input voltage range 9~16V 5)Rated voltage 12.5V 6)Start Current 4.5A 7)Hot light up current 4.5A 8)Max. start voltage 23kV 9)Working Current 4.5A 10)Working temperature -40~ 105°C 11)Lifetime 50,000H 12)Holder's N.W 14G 13)Scope of application 98% Cars 14)Defect Rate Less than 1% 2.Car lamps advantage: 1)Over / low-current protection 2)Voltage output overload / low protection 3)Thunder resistance 4)High safety 5)Short-circuit protection: Auto protect 0.5 second after short-circuit 6)Open protection: Auto protect 0.5 second after open-circuit 7)High voltage protection :more than 16.5V closeï¼?less than 16V open 8)Low voltage protection:less then 6.5V close ï¼?more than 8.5V open 9)Reverse Protection:Auto Protect in 1second after Reverse connection 3. HID submitted following tests: 1) 2-3hours continuous working aging test. 2) Connection circuit protection test. 3) Lack of voltage protection test. 4) Over voltage protection test. 5) Flash light concussion test. 6) Quakeproof capability test. 7) Cold & warm boot test. 8)Polarity protection test. 9)Short-Circuit protection test. Aging Test: (Height simulation of the internal engine temperature of the car for adjustment test) 4.Packing details: 1)White box Size 13*8*4.5CM 2)CTN Size 41.5*23.5*27.5CM(50Pcs) 3)CTN G.W about 16KG 6.Fit Most Car lamps: 1)H Series(Single Bulbs) H1,H3,H4,H7,H8/H9/H11,H10,H13,H15,H16/5202 etc 2)900 Series 9003/H4 ,9004/9007,9005/HB3,9006/HB4 etc 3)A HID and A Halogen H4-2,H13-2,9004/9007-2 etc 4)Bi-xeon bulbs(With wire relays) H4-3/H4 H/L, H13-3/H13 H/L, 9004/9007 H/L etc More details pls call us,thank you. Mid to High-end markets! CDHlighting-13years Manufacturer and trading for Xenon/LED Headlights,LED DRL,HID projector lens etc car lights in China!
With broadband voltage (120-277 V), abnormal lamp protection, so that the product can work more secure, and reliable; PC fire-retartant plastic shell, endure high temperature, fire-retardant, in line with the advanced standards of CE design Since power consumption less ,so energy saving significantly Preheating activated lamp is easier to start at low temperatures, longer life time for lamp Low temperature, no stroboscopic, no noise, anti-electromagnetic interference, low harmonic distortion Apply to frequent switching, to long time Lighting Project (shops, showrooms, homes, factories, offices, workshops,water clusters lighting or decorative lighting)and so on; Perfect consistency, and stable performance - 72.2*17.2*10.5 132.3*17.2*10.5 62*23*14 124*23*14
Ppi series characteristic silicon iron distrubuted gapped powder core lower losses than powder iron cores good dc bias performance lower cost
Everbright electronics (ningbo) co., ltd. Is a professional manufacturer of electronic metal halid Ballast, electronic hps ballast, electronic ballast for road lighting and grow light ballast. 1pc/box
All type of ballast.
Key Specifications/Special Features: SMD common-mode choke coil Low profile and small size SMD Suitable for reflow soldering Operating temperature: -10 to +60 degree Celsius Applications: desktops, laptops, DSC, and computer peripheral RID common-mode choke coils Small-profile choke coils Ferrite core toroid choke coils Large-current choke coils Low resistance choke coils MPP/hi-flux/sendust/RF carbonyl/iron power core choke coils For excellent EMI suppressor High frequency, low loss Common-mode filter Toroidal common-mode inductor Inductance L1, L2 range: 100uH to 5,000uH Materials: Core: ferrite core Wire: 2-UEW Base: phenolic base Terminal: tinned-copper wire Adhesive: epoxy resin Temperature rise: 45 degree Celsius maximum at rated current Storage temperature: -25 to +85 degree Celsius Operating temperature: -20 to +80 degree Celsius Resistance to solder heat: 260 degree Celsius, 10 seconds
Key Specifications/Special Features: Rated current: 0.3 to 10A Low resistance 0.7 to 100mH dual choke 100kHz to 3MHz common mode resonance Low temperature rise Applied in DC/DC, AC/DC line noise suppression, telecommunication system, LCD/PDP televisions, and computer periph
Types: EC type high frequency switch transformer EE, EI type high frequency switch transformer PQ type high frequency switch transformer EFD type high frequency switch transformer EP type magnet-shielding switch transformer RM type communication filter, aux power transformer ET and FT type linearity filter T (ring) type filter and switch transformer G (jar-shaped) switch transformer DR (I) type transformer T (ring) iron power core, DC filter inductor Applications: switching power supplies, chargers, TV and CRT monitor display, UPS, VCD/DVD players, audio and visual equipment, OA machines, and inverter
Advantage: Lighter xenon bulb for 5 000 hours Performance better than hella Up to war industry level Protect all the electrical parts No damage start, protect xenon bulbs Constant power Specification: 1) input voltage range : 9v~18v 2) rated voltage : 13.2v 3) cold light up current : 6.5a 4) hot light up current : 5.4a 4) max. Start voltage : 23kv 5) input current : 3.2a 6) output power : 40.2w 7) working temperature : -40~105ípc 8) size : 10.5cm*7.7cm*3.2cm
Toroidal choke.
1) input voltage range: 8v-19v 2) typical current: 3.2a 3) output power: 35w 4) stable performance 5) working temperature: -40 ~+105 6) the ballast matches all lamps, such as h1, h3, h4, h4 h/l, h7, h8, h9, h11, 9004, 9005, 9006, 9007, d2s, d2r, d2c etc.
We have high quality fluorescent energy saving ballast, we offer the bats price and option of bargain. Latest technology in saving energy cost. 1x50 pieces
Electric chokes Ballast are manufactured used 28 Swg.coated aluminum wire, 1200 turns, resin based to operate on 240/250 cy.AC.0.5 Amps and open type copper chokes using 28 gauge Copper wire with 750 turns, also to operate on 240/250 cy.AC, 0.5 amps. Both products are guaranteed for quality and free replacement effected immediately on receipt of rejected pieces without question. But the rejections should be accompanied by the nature of defects noticed and the customers view/advice how to avoid or im0rove the situation to ensure consistent quality/service. Weigfht 600 to 650 gms. 1.25"x3.5"x2cms.Ht.
Magnetic ballast for hid lamp Brand: aoou Model number: te For hs:(high-pressure sodium) discharge lamp Mh: (high-pressure metal halide) discharge lamp Hm:(high-pressure mercury vapour) discharge lamp 1). Main voltage: 220 - 240v 2). Main frequency: 50 - 60hz 3). Low raise temperature 4). Low power consumption 5). Provides long service life and super quiet 6). Low magnetic leakage and low raise temperature 7). Watts: 35w, 50w, 70w, 80w, 100w, 125w, 150w, 250w, 400w 8). Color: ivory 9). Material: copper or aluminum wire, silicon steel sheet 10). Tw:130 Min.Order: 1000pcs/mixed wattage Packing: by carton box then by pallet Delivery : 35days Payment: t/t or l/c at sight Samples: available Oem available
Magnetic ballast for double-ended straight-tube or t-r (circular-shaped) fluorescent lamps Brand: aoou Shape: 28*41mm Tw: 130 Item: 800 Voltage: 220v-240v, Frequency: 50hz, 60hz Wattage: 15w, 18/20w, 21w, 26w, 28w, 36/40w, 58/65w, 70/75w, 80w, 85w, 100w Pure copper wire, good silicon steel, no noisy, low power consumption, cute looking, low temperature raise. Min. Order: 1000pcs / mixed wattage Packing: by carton box then by pallet Delivery : 35days Payment: t/t or l/c at sight Samples: available Oem available
1)for hs lamps 70-400w and hi lamps 70-400w 2) main frequency: 50-60hz 3) main voltage: 220v-240v 4)ignition voltage: 2.5 4.5kv Payment terms: l/c, t/t Minimum order quantity: 1000pcs/pcs Pakage: carton Delivery time:30days.
Magnetic transformer for low-voltage (12v) halogen incandescent lamp Brand: aoou Model number: 901 Shape: 37mm*42mm Place of origin: china Features: 1) main voltage: 110v-130v/220v/230v/240v 2) main frequency: 50 - 60hz 3)low power consumption 4) provides long service life and super quiet 5) low magnetic leakage and low raise temperature 6) specifications: magnetic transformer for low voltage halogen lamps 50w 7) color: ivory 8) material: silicon steel sheet cover 9)oem/odm orders available Tw: 130 Payment term:t/t, l/c at sight