Input pressure 15Mpa Output pressure 0.2-0.3 Mpa Flow range:1-10L/min It has different styles
Size:5L/10L Voltage:110v /220v
Size:10Nm/H, 20 Nm/H,30Nm/H,50Nm/H,60Nm/H High quality easy to installation with
oxygen concentrator wholesale, from ISO 13458 certificated manufacturer
Oxygen Lance Tubes Thermic Lance Tubes
we are provide medical oxygen cylinder 46.7 litres water capacity & gas 7 cubic and also provide 10.2 litres water capacity , gas 1.5 cubic
Product Size:47x28.5x55.6cm Oxygen flow:0-5L/min Power:500W Noise: 52dB(A) Net weight:23kgs Oxygen density: 93%�±3% With nebulizer function Nebulizer rate:0.1mL/min Optional function: oxygen density alarm function CE certified
1.easy movable oxygen filling station 2.suitable for small hospital 3.easy operation 4.totally oil free ,safety ,and reliable
6m3 Microboost Medical Oxygen Plant Compressor 1.easy movable oxygen filling station 2.suitable for small hospital 3.easy operation 4.totally oil free ,safety ,and reliable
Climbing, before and after exercise, closed space for office students, when they are sleepy while driving, dogs, and when they need oxygen in case of emergency breathing disease
Veterinary Oxygen Concentrator 10L oxygen concentrator 10L oxygen concentrator Affordable. efficient and easy to use.Standard single flow.optional double flow. It is an easy-to-use oxygen concentrator with a single flow adjustment knob device. Optional double flow. optional nebulizer function. PRODUCT DETAILS Features Liter Flow: 0-10L/min Oxygen Concentration: 93±3% Outlet Pressure (Mpa): 0.04-0.07 Sound Level: 50db Power: AC230V. 50Hz Power Consumption: 550W LCD display: Operating pressure. Present Working Time Alarm: Power failure alarm. High&Low pressure alarm. Temperature alarm. Low purity alarm. Net weight:28kg Size: 365�?375�?600mm The optional dual-flow configuration allows two users to inhale oxygen at the same time by sharing one machine. Support for 24�?365 operation Suitable for oxygen supply for small animals.such as dog.cat.etc. Accessories available upon request contact your representative for details. Available work with Wondcon animal cage. Wondcon veterinary anesthesia machine. Optional Type for choose before order Type 1:single flow for vet Type 2,single flow for vet Type 3,double flow(optional) Optional nebulizer port for type 1/2/3
Oxygen Mask Pediatric It is made of medical grade PVC. nonsterile. Ergonomic mask compatible with facial contours. Channeled 200 cm connection hose resistant to breakage and bending. Connector conforming to standards. It is disposable.
In electric arc furnace steelmaking, oxygen or other gases are delivered to melt and refine steel in the electric arc furnace. (2) Inject other powder additives to adjust steel grades or make special steel. (3) Remove the slag in the oxygen converter. (4) Other uses, such as strong heat resistance, oxidation resistance, sulfidation resistance and corrosion resistance. steelmaking oxygen lance oxygen lance electric furnace steelmaking 1. Low consumption. The high temperature resistant coating forms strong heat resistance and oxidation resistance together, which can achieve the minimum consumption of oxygen blower and reduce the cost. 2. High quality: all production links from the selection of raw materials to the production of finished products are under strict quality control management. 3. Low price: The production line formed by the more advanced production equipment realizes the high quality and low price of the products. Specification Editing Broadcast Specifications and models of oxygen blowing pipes are: 5*1, 5*1.5, 6*1, 6*1.2, 6*1.5, 8*1, 8*1.2, 8*1.5, 9.52*1.24, 10*1, 10*1.2 , 10*1.5, 10*1.8, 10*2, 10.5*2.5, 12*1, 12*1.2, 12*1.5, 12*1.8, 12*2, 13*1, 13*1.2, 13*1.5, 13 *2, 14*1, 14*1.2, 14*1.5, 14*2, 16*1, 16*1.2, 16*1.3, 16*1.4, 16*1.5, 16*2, 17*2, 18*2 , 19*2, 20*2, 21*2, 22*2, 27*2, to 38*11, etc. Oxygen blowing pipes are widely used in construction and industry. The cleaning and preheating of oxygen blowing pipes are as follows: Before spraying (throwing) treatment, use cleaning method to remove grease and fouling on the surface of the oxygen blowing pipe, and use a heating furnace to preheat the pipe body to 40-60 �°C to keep the surface of the oxygen blowing pipe dry. In the spraying (throwing) treatment, since the surface of the oxygen blowing pipe does not contain grease and other dirt, the effect of rust removal can be enhanced. The surface of the oxygen blowing pipe after rust removal is cleaner.
Weight : 29.5kg External dimension : 390mmX350mmX720mm Power : 750VA Average sound pressure level: 60dB Oxygen pressure : 30-60KPa Oxygen flow : 10L/min Oxygen concentration : 90%(V/V) -Select CECA top molecular sieve to stabilize oxygen production. -With ultra-long cumulative timing function, the total working time can be seen at a glance. With timing shutdown function, saving time and worry. - The compressor has a thermal protection switch to ensure the safety of the whole machine.
FLOW RATE 10 LPM OXYGEN CONCENTRATION 93% EASY TO USE MADE IN JAPAN 2 YEARS SERVICE WARRANTY
Included: 1. Air oxygen blender 2. Humidifier with disposable chamber 3. Support arm 4. Adult disposable breathing circuit with a heated wire 5. Nasal cannula 6. Trolley 7. Medical air compressor 8. Tool kits Package: 1 unit/ 2 cartons 1st cartonï¼? 90.0 x 43.5 x 30.0cm / 0.1175CBM G.W.: 19.6kg 2nd carton 70.0 x 70.0 x 56.0cm / 0.2744CBM G.W.: 55.0kg
medical oxygen Oxygen connector 1.5M/1.8M/2M/5METC
Power Source AC 220V, 50-60Hz (Optional: AC 110V, 50-60Hz) Heated Plate 150W Thermal Cut Off 95±6oC Display Three digit, 0.56 inch, 7 segment Led Temperature Monitoring 0-75oC Max-temperature of Heated Plate 85oC Heated Wire AC 22V 60W, 50-60Hz Power Rate 220W Alarm Yes Temperature Control Setting Invasive Mode:Chamber outlet: 35.5-37oC, Airway: 35-40oC Non-invasive Mode:Chamber outlet: 31oC, Airway: 28-34oC Range 10-70oC, Accuracy: ±2oC (In 25-45oC temperature range)
Oxygen generator uses molecular sieve pressure swing adsorption principle, takes air as raw material, and absorbs nitrogen and other gas components to improve oxygen concentration to produce oxygen-enriched air. Oxygen concentration ranges from 90% to 96% (VA/), which can provide oxygen for therapy or relieve discomfort caused by hypoxia. When the equipment works, compressed air is injected into a closed adsorption tower filled with molecular sieve, which causes the pressure in the adsorption tower to rise. With the increase of environmental pressure, the molecular sieve absorbs a large amount of nitrogen in the compressed air, while oxygen in the compressed air still exists in the form of gas and is collected through a certain pipeline. This process is often referred to as the "adsorption" process. When the nitrogen adsorbed by the molecular sieve in the container reaches the critical state of adsorption saturation, the adsorption tower is blown to reduce pressure. With the decrease of environmental pressure, the ability of molecular sieve to adsorb nitrogen decreases, and nitrogen is released back to the gas phase from the molecular sieve and discharged as waste gas. This process is often called "desorption". In order to ensure the continuous and stable output of oxygen, the oxygen generator usually adopts two (or more) molecular sieve adsorption towers, which are controlled by rotating separation valves, so that one adsorption tower is in the adsorption process while the other adsorption tower is in the desorption process, and the two work alternately to complete the continuous oxygen production process.
10L oxygen concentrator Model: QJ-ZY10La CE certificate & China government medical approval 10L, dual outlet , Purity: 90%~93%, medical grade. With humidification bottle High quality molecular sieve, oil-free compressor with long lifespan Timing as per user setting, automatically shut off 220V@50/60Hz, 700W
