In electric arc furnace steelmaking, oxygen or other gases are delivered to melt and refine steel in the electric arc furnace. (2) Inject other powder additives to adjust steel grades or make special steel. (3) Remove the slag in the oxygen converter. (4) Other uses, such as strong heat resistance, oxidation resistance, sulfidation resistance and corrosion resistance. steelmaking oxygen lance oxygen lance electric furnace steelmaking 1. Low consumption. The high temperature resistant coating forms strong heat resistance and oxidation resistance together, which can achieve the minimum consumption of oxygen blower and reduce the cost. 2. High quality: all production links from the selection of raw materials to the production of finished products are under strict quality control management. 3. Low price: The production line formed by the more advanced production equipment realizes the high quality and low price of the products. Specification Editing Broadcast Specifications and models of oxygen blowing pipes are: 5*1, 5*1.5, 6*1, 6*1.2, 6*1.5, 8*1, 8*1.2, 8*1.5, 9.52*1.24, 10*1, 10*1.2 , 10*1.5, 10*1.8, 10*2, 10.5*2.5, 12*1, 12*1.2, 12*1.5, 12*1.8, 12*2, 13*1, 13*1.2, 13*1.5, 13 *2, 14*1, 14*1.2, 14*1.5, 14*2, 16*1, 16*1.2, 16*1.3, 16*1.4, 16*1.5, 16*2, 17*2, 18*2 , 19*2, 20*2, 21*2, 22*2, 27*2, to 38*11, etc. Oxygen blowing pipes are widely used in construction and industry. The cleaning and preheating of oxygen blowing pipes are as follows: Before spraying (throwing) treatment, use cleaning method to remove grease and fouling on the surface of the oxygen blowing pipe, and use a heating furnace to preheat the pipe body to 40-60 �°C to keep the surface of the oxygen blowing pipe dry. In the spraying (throwing) treatment, since the surface of the oxygen blowing pipe does not contain grease and other dirt, the effect of rust removal can be enhanced. The surface of the oxygen blowing pipe after rust removal is cleaner.