Mechanical seal rings are components in a mechanical seal that are used to create a leak-proof seal between rotating and stationary components in equipment, such as pumps and mixers. They are typically made of materials that have low friction and high wear resistance, such as carbon, ceramic, or tungsten carbide. The mechanical seal rings work together to maintain the seal, even under high pressure and temperature, to prevent fluid or gas from escaping.
Mechanical seal rings are used to seal the gap between the rotating shaft and the stationary housing in equipment such as pumps and mixers, so that liquid cannot escape through the gap. These sealing mechanisms are often referred to as shaft seals or pump seals.
Jk manufactures primary rings or carbon/graphite wear surfaces that are used in many of the most sophisticated and reliable mechanical seals used in industrial, aerospace and military applications today. These mechanical seal assemblies typically consist of a carbon/graphite primary seal ring, mating face ring, secondary (O-ring) seal ring, spring, fasteners and metal housing.
Mechanical seal main rings can be supplied to customer drawings and specifications. These rings can be supplied plain, heat shrink fit or bonded in a metal retaining ring
Advantages
The support skeleton enhances the overall strength of the seal ring and the sealing capacity of the sealing ring can be increased by working pressure.
The sealing material has the advantage of high strength, high hardness and good elasticity
Working conditions
Compliant for use with several standards about hydraulic testing requirements including API 5CT-2018, ISO11960-2011 Petroleum and natural gas industries Steel pipes for casing or tubing, GB/T9711-2017; GB/T8163-2018 for seamless steel tubes; GB/T3091-2015 for welded steel pipes.
Working pressure: 80 MPa
Working temperature: -20 to +80
Working medium: water, emulsion, hydraulic oil
Material: Polyurethane
If you want to learn more, please visit our website.
Red R37 Rubber Fabric Oil Seals:
The NBR R37 Cloth Rubber Oil Seal is a specialized sealing assembly designed to effectively contain fluids within machinery and equipment.
Material: Nitrile rubber cloth/ NBR with Cloth, FKM/VITON with cloth
Features
The NBR R37 Cloth Rubber Oil Seal is made from nitrile rubber and offers excellent resistance to oils, fuels, and various fluids commonly found in industrial applications. The addition of reinforced cloth further strengthens the seal's structure, allowing it to withstand the rigors of high-speed rotation and reciprocating motion.
Designed for reliability, NBR R37 Cloth Rubber Oil Seals utilize a precision-engineered lip to create a safety barrier against fluid leakage, preventing lubricant leakage while keeping out contaminants.
Widely used in a variety of industries including automotive, manufacturing and agriculture, NBR R37 Cloth Rubber Oil Seal protects critical mechanical components and ensures optimal performance.
We can produce various specifications according to customer requirements, materials, non-standard products.
Tobee Replacement AHLSTAR APP/T 51-300 end-suction single-stage centrifugal process pumps with cartridge mechanical seal are used for Clean and lightly contaminated liquids, Viscous liquids, Fibrous slurries, Large solids containing liquids and Gas containing liquids and self-priming applications.
APP High performance process pumps for demanding applications
AHLSTAR APP end-suction single-stage centrifugal process pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs.
Mechanical seal rings are components in a mechanical seal that are used to create a leak-proof seal between rotating and stationary components in equipment, such as pumps and mixers. They are typically made of materials that have low friction and high wear resistance, such as carbon, ceramic, or tungsten carbide. The mechanical seal rings work together to maintain the seal, even under high pressure and temperature, to prevent fluid or gas from escaping.
Mechanical seal rings are used to seal the gap between the rotating shaft and the stationary housing in equipment such as pumps and mixers, so that liquid cannot escape through the gap. These sealing mechanisms are often referred to as shaft seals or pump seals.
Jk manufactures primary rings or carbon/graphite wear surfaces that are used in many of the most sophisticated and reliable mechanical seals used in industrial, aerospace and military applications today. These mechanical seal assemblies typically consist of a carbon/graphite primary seal ring, mating face ring, secondary (O-ring) seal ring, spring, fasteners and metal housing.
Mechanical seal main rings can be supplied to customer drawings and specifications. These rings can be supplied plain, heat shrink fit or bonded in a metal retaining ring
Advantages
The support skeleton enhances the overall strength of the seal ring and the sealing capacity of the sealing ring can be increased by working pressure.
The sealing material has the advantage of high strength, high hardness and good elasticity
Working conditions
Compliant for use with several standards about hydraulic testing requirements including API 5CT-2018, ISO11960-2011 Petroleum and natural gas industries Steel pipes for casing or tubing, GB/T9711-2017; GB/T8163-2018 for seamless steel tubes; GB/T3091-2015 for welded steel pipes.
Working pressure: 80 MPa
Working temperature: -20 to +80
Working medium: water, emulsion, hydraulic oil
Material: Polyurethane
If you want to learn more, please visit our website.
2159 Mechanical Seals Suppliers
Short on time? Let Mechanical Seals sellers contact you.
Slip Ring Seal
A slip ring seal is a type of mechanical sealing device used to prevent fluid or gas leakage in rotating machinery. It is typically used in equipment with rotating shafts, such as electric motors or generators, to provide a seal around the rotating shaft and prevent the leakage of fluids or gases from one side of the seal to the other. A slip ring seal is typically made up of a stationary component and a rotating component, and is designed to maintain a sealing interface as the shaft rotates.
Performance and Purpose
Slip ring combined seal is made up of low-friction PTFE composite slip ring and O-ring. It has the advantages of friction resistance, temperature resistance, high pressure bearing ability, high linear velocity, small friction force and long use-life. And which is applicable to dynamic and static seal of hydraulic and pneumatic system in aircraft, metallurgy, petroleum, chemical, textile, food industry and so on.
Advantage
The structure is simple, easy to install and can be used repeatedly
The sealing performance is reliable and adjustable
Different types of PTFE materials(Self pressed PTFE barrel material)can be selected according to the working conditions of sealing environment
The working life of dynamic pressure seal is 5 ~ 10 times higher than that of conventional rubber sealing products, and the highest working life can reach dozens of times
It can be used as oil-free lubrication seal
The friction force is small, and the dynamic and static friction force are equal. The friction force is 1 / 2 ~ 1 / 4 of the O-type rubber ring, which can eliminate the crawling phenomenon of motion at low speed and low pressure.
If you are looking for more details, kindly visit our website.
Mechanical Seal is advanced sealing technique without sealing leakage, The advantages are integrating construction, convenient installation & replacement, The design of mechanical seal and seal box is suitable for liquid flow condition, So it has high abrasion and vibration resistance, Mechanical seal can be used in various severe conditions.
Slurry Pump Mechanical seal is widely used in chemical slurries, alumina plant, FGD systems, power plant ash handling systems, pulp and paper and other industries. The mechanical seal consists of a stationary and a rotating face pressed together under mechanical and hydraulic pressure to prevent leakage. Silicon carbide is the most common material used for manufacture of these seal faces. The use of mechanical seals in slurry applications requires extreme care and attention due to the limited reliability common in this developing area. Sea costs are relatively high and require substantial justification to warrant their use.
Tobee�® Slurry Pump Mechanical Seal is mainly used for chemical slurries, dredging, alumina plant, flue gas desulfurization systems power plant ash handling systems, pulp and paper and other industries, It can be installed on slurry pump, gravel pump, dredge pump, FGD pump, sewage pump, clean water pump, chemical pump, oil pump for different work condistions.
Mechnical Seal TIH-65-50-160-SS316L for Sea Water Pumps, Centrifugal Chemical Pumps.
Slurry Pump Mechanical Seal is mainly used for chemical slurries, dredging, alumina plant, flue gas desulfurization systems power plant ash handling systems, pulp and paper and other industries, It can be installed on slurry pump, gravel pump, dredge pump, FGD pump, sewage pump, clean water pump, chemical pump, oil pump for different work condistions.
Chemical Pump is single-stage end-suction (axial suction) cantilever type centrifugal pump, which is used to transport corrosive liquid with viscosity similar to water and without solid particles. The marked and rated performances and dimensions adopt ISO2858 international standard. It has wide performance range, high efficiency, high mechanical, chemical, physical level and convenient maintenance. It is widely applied to transport various corrosive media or media in which pollution is forbidden similar to water in such industries as chemical industry, petroleum, metallurgy, electric power, papermaking, food, starch factory, pharmacy and synthetic fiber etc.
Replacement AHLSTAR APP/T 51-300 end-suction single-stage centrifugal process pumps with cartridge mechanical seal are used for Clean and lightly contaminated liquids, Viscous liquids, Fibrous slurries, Large solids containing liquids and Gas containing liquids and self-priming applications.
APP High performance process pumps for demanding applications
AHLSTAR APP end-suction single-stage centrifugal process pumps are used for demanding industrial applications to ensure process reliability, high efficiency and low operating costs.
APP 51-300 Pump Mechanical Seal Design Features:
The cartridge seal forms one solid unit having its own sleeve, fixing flange, seal faces, springs and all necessary O-rings, gaskets, setting clips and fixing crews.
By the setting clips, the cartridge seal is set radially and axially in the right location during assembly.
The seal is fixed on the pump shaft or on the shaft sleeve by set screws and into the casing cover by studs and nuts utilizing fixing slots (4x90) on the seal flange.
Since cartridge seals can be fitted to the standard casing cover of all kinds of pumps and rotating flow machines, it is possible to use the same seal types in a variety of pumps and other machines.
Water Pump Mechanical Shaft Seal for Water Pump Auto
1) Heat shock stablity
2) chemical corrosion-resistant
3) High temper-endure(up to 1650 )
4) Wearing/corrosion/oxidation resistant
5) Highly performance of mechanical strength
6) Cleaning or etching the hardest sub-surfaces
7) Used for grinding, lapping, and wire saw cutting as well as abrasive blasting
Cassette Oil Seal for Wheel Hub 165*190*14/20
Brand: KDIK Size:165*190*14/20
Type:Rwdr-Kassette Material:NBR
Business type:manufacturer factory Application:Agricultural machinery,construction machinery
Original :Hebei ,china Packing:1 pcs to a PP bag
Size:customized
Place of Origin: Hebei, China
Brand Name: OEM
Model Number: QD01
Product name: Oil Seal
Material: NBR
Color: black
Application: car oil seal
Standard or Nonstandard: Standard Product
Feature: Oil Resistance
MOQ: 10 PCS
Type: TC
Certificate: 16949
Service:CUSTOMIZED SIZE and free samples
The rubber oil seal has excellent chemical resistance and can be used for petroleum, fuel, solvents, etc.
PRODUCT DESCRIPTION
Rubber Oil Seals Feature:
Advantage: heavy machinery, and are usually used for lubrication of the shaft with a grinder or a large transmission shaft of the gearbox.
1. The outer edge of the clip seal fabric is composed especially strong, good static sealed;
2. The sealing lip having a radial permanent pressure contact;
3. Highly abrasion resistant.
We can produce various specifications according to customer requirements, materials, non-standard products.
Custom rubber oil seals
We design and develop specific and custom rubber seals for many industries.
Our rubber seals are used in the following industries.
Automotive
Marine
Agriculture
Semiconductor
Chemical
Oil and gas
Heating, ventilation and air conditioning
â?? Pharmaceuticals
Food & Beverage
Power Generation
Fabric Reinforced R35 Rubber Fabric Oil Seals
Name Red V type fabric oil seal
Material Nitrile rubber cloth/ NBR with Cloth, FKM/VITON with cloth
Process Molding
Size 8*22*7mm to 950*1000*25mm
Color Black, brown
Hardness 70-75 shoreA
Feature Oil Resistance, rear resistance, heat resistance
Sample Accepted
Apply Industry machinery
Certification ISO 9001
Keywords V type textile rubber oil seal. Mechanical seal, rubber seal
Package Papers inside, then carton boxes
MOQ 100 PCS
Shipping Sea freight · Land freight Air freight
Payment TT, Alibaba Assurance
Sealing component is mainly used in hydro-static testing machines for pressure tests of steel pipes, it is applicable to the pressure testing of casings, tubings, natural gas pipes and other steel pipes. As ultra pressure components, sealing components are very suitable for machines that require high pressure seals.
Descripation:
The sealing component is made up of a polyurethane sealing ring and fan-shaped supporters. It is mainly used in hydro-static testing machines for pressure tests of steel pipes. In the non-working state there will be a gap between the sealing ring and the surface of the steel pipe. When testing, hydraulic liquid is applied to the surface of the sealing ring. The ring is then pressed to enclose the surface of steel pipe firmly, allowing pressure testing can be performed. It is applicable to the pressure testing of casings, tubings, natural gas pipes and other steel pipes. It has also been used in leak inspection of steel pipes, connections, welded joints and sealing for high pressure valves.
The u ring seal makes use of the advantages of Polyurethane, such as high strength, hardness, good elasticity and durability. It is used in the hydraulic testing of oil well casing tubes, steel pipes and a variety of welded steel pipes of the petroleum and natural gas industry.
Product information
The u ring seal makes use of the advantages of Polyurethane, such as high strength, hardness, good elasticity and durability, it has high sealing performance, abrasion resistance, and low deformation.It is used in the hydraulic testing of oil well casing tubes, steel pipes and a variety of welded steel pipes of the petroleum and natural gas industry.
2159 Mechanical Seals Suppliers
Short on time? Let Mechanical Seals sellers contact you.
