Velocity : V 20 m/sec.
Pressure : 12 bar(max)
Temperature : -70 dig C to +200 dig C
Secondary Seals : Viton, PTFE, EPDM, Neoprene, Nitrite, Aflas
Metal Parts : SS 316, SS 304, Hast-C
Applications : Petrochemicals, Chemical industry, Oil applications, Petroleum refinery, Light hydrcarbons
Face Material : Carbon, Silicon Carbide, Caramic, Tungsten Carbide
Matching up with the requirements of our clients, we are involved in offering Single Spring Unbalanced.
Pressure : P 12bar(max)
Temperature : -50 Degree C to +200 Degree C
Velocity : V 20 m/sec.
Secondary Seals : Viton, PTFE, EPDM, Neoprene, Nitrite, Atlas
Metal Parts SS 316, SS 304, Nast
Face Materials Silicon Carbide,Tungsten Carbide,Carbon, Ceramic
Shaft diameter : 20mm-120 mm
Application : Slurry application, Petroleum refinery, General chemicals, Fertilizers
Owing to the rich industrial experience and expertise in this business, we are involved in providing Spring Seals Unbalanced Lug.
Shaft diameter : 14mm - 100mm
Velocity : V 20 m/sec.
Temperature : -50 dig C to +220 dig C
Pressure : P 25bar(max)
Metal Parts SS 316, SS 304, Hast-C, Duplex
Face Materials Carbon, Silicon Carbide, Special Cast Crmo Steel
Application : Water & Waste Water, Chemical Industry, Oil Application, Lube Oils, Low Solid Content Media, M
We bring forth vast industrial experience and expertise in this business, involved in offering a high-quality range of Wave Spring Seals Unbalanced.
Metal Parts SS 316, SS 304
Velocity V 10m/s
Pressure P 16 bar(max)
Temperature -20 dig C to +140 dig C
Shaft diameter : 10mm-100 mm
Elastomers : NBR, Viton, EPDM
Applications : Water & Waste Water, Chemical Industry, Sulfide Slurries
Being a quality oriented organization, we are involved in providing a supreme quality range of Rubber Bellow Seals.
Application : Heat Transfer Fluid,Pulp And Paper
Shaft Diameter : 1 - 4mm
Pressure : 20 bar (max)
Velocity : 20 m/Sec
Face Material : Silicon Carbide,Carbon,Ceramic
Wellded Bellow : AM 350,Hast-c
Temperature : 50-350 degree C
With sincerity and hard work of our professionals, we have carved a niche for ourselves in this domain by providing premium quality gamut of High Temperature Bellow Seal.
Other Details:
We also offer high temperature metal bellow seal with unique designs to handle corrosive and abrasive media. Application of quality raw material such as carbon, PDFE, TC and carbide. Metal bellow seal is used in areas such aspetrochemicals, sugar, paper & pulp industries
2159 Mechanical Seals Suppliers
Short on time? Let Mechanical Seals sellers contact you.
Shaft Diameter : 0.750, 4.000
Face Material : GFT, Silicon Carbide
Pressure : 10 Bar (max)
Temperature : 40 to 120 Degree Celsius
Velocity : 20 m/s
Metal Parts : SS 316, SS 304, Hast-C
Elastomers : PTFE, GFT
We take pleasure to introduce ourselves as one of the renowned firms for providing the best-in-class range of PTFE Bellow Seal.
Applications : Paper And pulp industries, Petrochemical industries, Dyeing industries
Seal Faces : TC, Sic/Ceramic, Sic
Secondary Seals : Viton, PTFE, GFT, Karlez
Metal Components : SS-316, Hast-C, Monel
Shaft Diameter : 25 to 150mm
Pressure : up to 45 Bars
Speed : Up to 25 m/s
Temperature : -50 to 160 Degree C
We are presenting an excellent quality assortment of Cartridge Seal.
Applications : Clear And Lubricating Media
Elastomers : NBR, Viton, EPDM, FFKM, Karlez, PTFE, Aflas
Metal Parts : SS 316, SS 304, Hast-C Et Alloy 20
Face Materials Carbon, Silicon Carbide, Ceramic, Tungsten Carbide
Velocity : 20m/s
Pressure : Vacuum 30 bar(max)
Temperature : -40 dig C to +280 dig C
Shaft diameter : 20mm-100 mm
Application : Utility Pumps, Transfer pump
Shaft Diameter : 2 -8 inch
Pressure : Vacuum 13 bar (max)
Speed : 3500 rpm
Face Material : Carbon, Silicon, Carbide, Ceramic
Temperature : Amb 135 dig C
Being a well-established organization, we are engaged in offering a distinguished range of Split Seal
Shaft Dia : 25 to 100mm
Metal Components SS-316 Operating Limits
Secondary Seals : Nitrile/ Neoprene/Viton/PTFE
Seal Faces : Carbon Vs Ceramic/Sic./TC
Temperature : -50 to 150 Degree C
Pressure : Up to 1.40 MPa
Backed by our expert and experienced professionals, we provide Agitator Seal
Material - Stainless Steel & Rubber
Feature - Corrosion Resistant
Application- Water, Muddy Application etc.
Seal Face Stationery : Ceramic, Silicon Carbide, Carbon, Tungsten Carbide etc. Rotary : Carbon, Tungsten Carbi
Temperature - 20 to 200 Deg C
Pressure - Upto 10 Bar
* Our company has gained the immense clientele support by offering them the best quality range of Pump Spare Parts.
Face Materials - Carbon/ Silicon Carbide
Metal Parts - SS 304, Aluminium, Brass
Secondary Seals - Elastomers
Application - Oil, Water, Steam, Air, Coolant
Pressure - 10bar
Temperature - 120dig C
Size Range - 3/8 inch to 2.0 inch
Speed Upto:
750 rpm: For straight threads 2.0" size
2500 rmp: For straight threads 1.0" size
3000 rmp: For straight threads 1 1/2" & 1 1/4" size
3500 rmp: For straight threads 3/4" size & below
Pressure - P: 40 bar(max)
Application - Petroleum refinery, Chemical industry
Material - SS316
Shaft Diameter - D: 1000-4000"
Speed - Upto 4500fpm /23 m/s
Elastomers - FKM (Optional FFKM, BUNA, EPR)
The Expert Engineering has developed API (American Petroleum Institute) 682 seals for the oil and gas industry market. The Expert Engineering Type A pusher seal is available in Arrangement 1, 2 and 3. An Arrange- ment 1 seal is a single contacting wet cartridge seal with a Throttle bush. Arrangement 2 cartridge seal is the same configuration as the Arrangement 3 seal but is an un-pressurized dual seal where the barrier fluid pressure is kept lower than the seal chamber fluid pressure. The outboard seal will provide back up of hazardous fluids in case of Inboard Seal failure. Expert Engineering has designed, manufactured and tested to meet API 682 requirement, Type A pusher seal in Arrangement 1 and Arrangement 3 (dual pressurized cartridge seal) for the market. In an Arrangement 3 design the barrier fluid pressure is kept higher than the seal chamber pressure and is designed to handle and contain hazardous and light hydrocarbon fluids. The Inboard seal is specially designed to handle reverse pressure. Outboard Seal is same as Arrangement Seal. With many years of experience in seal design, manufacturing and testing for the industrial market, Expert Engineering has the experience to solve your sealing problems. Expert Engi-neering provides optimum sealing solutions to meet customer needs.
Velocity : 20 m/sec.
Pressure : 30bar(max)
Temperature : -50 digC to +220 dig C
Shaft diameter : 18mm - 100 mm
Metal Parts : SS 316, SS 304, Hast-C, Monet, Alloy-20
Secondary Seals : NBR, Viton, PTFE, EPDM, Neoprene
Face Materials : Silicon Carbide,Tungsten Carbide,Carbon, Ceramic
Applications : Water waste water & hot water, Chemical industry, Oil Applications, Food industry, Pulp & Paper, Bo
We are one of the most reliable companies in this domain and are into offering Wave Spring Seals Balanced.
Temperature : -20 Degree C to +140 Degree C
Metal Parts : SS 316, SS 304
Face Materials Carbon, Silicon Carbide, Tungsten Carbide, Ceramic
Shaft diameter : 10mm-75 mm
Pressure : P 16 bar(max)
Velocity : V 10m/s
Elastomers : NBR, Viton, EPDM, Neoprene
Efficient name in the industry involved in offering the optimum quality of Rubber Bellow Seals.
Face Materials Carbon, Silicon Carbide, Ceramic, Tungsten Carbide
Metal Parts : SS 316, SS 304
Elastomers : NBR, Viton, EPDM, FFKM, PTFE
Velocity : V 20m/s
Temperature : -25 dig C to +250 dig C
Pressure : P 15 bar(max)
Shaft Diameter : 20mm -100mm
We bring forth vast industrial experience and expertise in this business, involved in offering a high-quality range of Cartridge Seals Single Arrangement.
Face Materials Carbon, Silicon Carbide, Ceramic, Tungsten Carbide
Metal Parts : SS 316, SS 304, Hast-C Et Alloy 20
Elastomers : NBR, Viton, EPDM, FFKM, Karlez, PTFE, Aflas
Velocity : 26m/s
Temperature : -40 dig C to +280 dig C
Pressure : Vacuum 16 bar(max)
Shaft diameter : 20mm-100.0mm
Applications : Petrochemicals, General chemicals, Refinery
Applications : Paper And pulp industries, Petrochemical industries, Dyeing industries
Seal Faces : Sic, Sic/Ceramic, TC
Secondary Seals : Viton, PTFE, GFT, Karlez
Metal Components : SS-316, Hast-C, Monel
Shaft Diameter : 25 to 150mm
Pressure : Up to 45 Bars
Speed : Up to 25 m/s
Temperature : -50 to 160 Degree C
With vast industrial experience, we are involved in offering a wide range of Stationary Mounted Cartridge Seal
2159 Mechanical Seals Suppliers
Short on time? Let Mechanical Seals sellers contact you.
