It is widely used in the whole industrial field The metal skeleton assembly in the cavity is particularly stable and accurate (note: static sealing between the outer edges of the metal skeleton is limited when sealing low viscosity media and gases). With dust â?? proof lip, prevent general and medium dust pollution and external dirt invasion.
Product Advantages
The Oil Seals TB is widely used throughout the industry. The standard rotary shaft seal has a metal case and a rubber spring seal lip. In addition, the air edge of the Oil Seals TB has a protective lip.
The metal frame assembly is particularly robust and accurate within the chamber (Note: static sealing between the outer edges of the metal frame is limited when sealing low-viscosity media and gaseous states.) With dust lip, to prevent general and medium dust pollution and the invasion of external dirt.
Type DO is the most common form that uses an O-Ring as a secondary sealing element
Type DO consist of two identical metal seal rings mounted in two separate housings face-to-face on a lapped seal face. The metal rings are centered within their housings by an elastomer element. One half of the Mechanical Face Seal remains static in the housing, while the other half rotates with its counter face.
Type DO is the most common form that uses an O-Ring as a secondary sealing element
Type DO consist of two identical metal seal rings mounted in two separate housings face-to-face on a lapped seal face. The metal rings are centered within their housings by an elastomer element. One half of the Mechanical Face Seal remains static in the housing, while the other half rotates with its counter face.
Product Applications
Mechanical Face Seals are predominantly used for sealing the bearings in construction machinery or production plants operating under extremely arduous conditions and subject to severe wear.
These include:
Tracked vehicles, such as excavators and bulldozers
Conveyor systems
Heavy trucks
Axles
Tunnel boring machines
Agriculture machines
Mining machines
Mechanical Face Seals are proven for use in gearboxes, mixers, stirrers, wind-driven power stations and other applications with similar conditions or where minimized maintenance levels are needed.
Mechanical Face Seals or heavy duty seals are specifically engineered for rotating applications in extremely arduous environments where they withstand severe wear and prevent ingress of harsh and abrasive external media. A Mechanical Face Seal is also known as Heavy Duty Seal, Face Seal, Lifetime Seal, Floating Seal, Duo Cone Seal, Toric Seal.
Oil seal is the seal of lubricant oil. It is an important and indispensable original of lubrication sealing system of rotary shaft of general purpose machinery. Commonly used in a variety of mechanical bearing point, especially the position of rolling bearing. its function is isolation the oil cavity and outside.
2159 Mechanical Seals Suppliers
Short on time? Let Mechanical Seals sellers contact you.
Materials used to manufacture these rings are EPDM based soft Thermoplastic Elastomer (TPE) & hard Thermoplastic Elastomer (TPE) for tight fitment and leak proof performance.
OPERATING LIMIT
seal size = 20mm to 150mm
pressure = 15kg/cm2
speed = 15m/s
temp = 20c to 250c
FACE MATERIAL rotary face = carbon, silicon carbide,ceramic
statonary face = carbon , silicon carbide ,
OPERATING LIMIT
seal size = 20mm to 150mm
pressure = 15kg/cm2
speed = 15m/s
temp = 20c to 250c
FACE MATERIAL rotary face = carbon, silicon carbide,ceramic
statonary face = carbon , silicon carbide ,
OPERATING LIMIT
seal size = 20mm to 150mm
pressure = 15kg/cm2
speed = 15m/s
temp = 20c to 250c
FACE MATERIAL rotary face = carbon, silicon carbide,ceramic
statonary face = carbon , silicon carbide ,
OPERATING LIMIT
seal size = 20mm to 150mm
pressure = 15kg/cm2
speed = 15m/s
temp = 20c to 250c
FACE MATERIAL rotary face = carbon, silicon carbide,ceramic
statonary face = carbon , silicon carbide ,
OPERATING LIMIT
seal size = 20mm to 150mm
pressure = 15kg/cm2
speed = 15m/s
temp = 20c to 250c
FACE MATERIAL rotary face = carbon, silicon carbide,ceramic
statonary face = carbon , silicon carbide ,
OPERATING LIMIT
seal size = 20mm to 150mm
pressure = 15kg/cm2
speed = 15m/s
temp = 20c to 250c
FACE MATERIAL rotary face = carbon, silicon carbide,ceramic
statonary face = carbon , silicon carbide ,
OPERATING LIMIT
seal size = 20mm to 150mm
pressure = 15kg/cm2
speed = 15m/s
temp = 20c to 250c
FACE MATERIAL rotary face = carbon, silicon carbide,ceramic
statonary face = carbon , silicon carbide ,
Seal is used to latch the openable door and fixed glass at 180 deg to avoid any water leakage through it.
Developed/Engineered from top quality grade of PVC Extrution.
Durable and Resistant to the extreme change in temperature.
Ideal for usage in shower cubicles for sealing the edges to prevent water leakage.
RoHs Certified
Available for 8mm, 10mm and 12mm Glass.
Available in various lengths: 2.2Mtr., 2.4Mtr. (Can be supplied as per customer's requirement upto 3 meters)
Seal is used to prevent the water leakage between wall and the glass,to be used on hinge side as a side seal.
Developed/Engineered from top quality grade of PVC Extrution.
Durable and Resistant to the extreme change in temperature.
Ideal for usage in shower cubicles for sealing the edges to prevent water leakage.
RoHs, CE Certified
Available for 8mm, 10mm and 12mm Glass.
Available in various lengths: 2.2Mtr., 2.4Mtr. (Can be supplied as per customer's requirement upto 3 meters)
2159 Mechanical Seals Suppliers
Short on time? Let Mechanical Seals sellers contact you.
