OPERATING LIMIT
seal size = 20mm to 150mm
pressure = 15kg/cm2
speed = 15m/s
temp = 20c to 250c
FACE MATERIAL rotary face = carbon, silicon carbide,ceramic
statonary face = carbon , silicon carbide ,
Double Cartridge Seal
EB60C are Single and Double Cartridge Seal used for large number of applications & suits for both ANSI & DIN Standard Pumps. These can be used as API â?? 682, Type A Category 1 Seal arrangement, Seal Ring is design to withstand reversed Pressure. 2EB60C is a Double Seal with Tandem arrangement Suitable for Media with solid particles. These seals can also be used in highly viscous medium with moderate temperature. Industries Serve are Automobile, Petrochemical, and Oil & Gas industries. These seals require a less Axial & Radial Space for installation. Salient features: Suits API-682 Standard Suitable for Slurry Application. Fits in both ANSI & DIN Standard Pumps Two Way Balanced Design Minimum Components Applications: Specially used in paper and pulp Industries, petrochemicals, petroleum refinery etc. Material: Seal Faces: Ceramic/Sic/Carbon Vs Ceramic/RB Sic./TC Secondary Seals: Viton/PTFE/GFT/FFKM Metal Components: SS-316/Hast-C/Carpenter-42
Applications : Paper And pulp industries, Petrochemical industries, Dyeing industries Seal Faces : TC, Sic/Ceramic, Sic Secondary Seals : Viton, PTFE, GFT, Karlez Metal Components : SS-316, Hast-C, Monel Shaft Diameter : 25 to 150mm Pressure : up to 45 Bars Speed : Up to 25 m/s Temperature : -50 to 160 Degree C We are presenting an excellent quality assortment of Cartridge Seal.
Rock Metal offers a wide range of standard cartridge seals that are versatile and easy to install, suit a wide range of duties and are commonly used in applications in the chemical, pulp & paper, power, food & beverage, mining, water/wastewater and general industries. Cartridge mechanical seal is a collection of all the parts of the mechanical seal, such as the rotary ring, stationary ring, spring, secondary seal, gland, etc. The rotating and stationary parts of this seal are pre-assembled into a whole before installation. After inspection and pressure test, they are installed in the seal cavity, fixed to the pump shaft with set screws, tighten the seal gland bolts, remove the assembly positioning plate, and the mechanical seal can be in a parallel working state and put into operation. This is not only easy to assemble but also ensures the assembly quality. Advantages of Cartridge Mechanical Seals 1. All parts of the seal are assembled into a whole, with a compact structure. 2. The seal is pre-assembled into a whole, which ensures the working height of the spring, is conducive to the operation of the seal under the designed working conditions, and it is safer. It eliminates measurement errors and improves the reliability of the seal. 3. The seal is easy and quick to install on site, without the need for on-site debugging (such as springs, sealing surfaces, etc.), which reduces the labor intensity of maintenance workers. It reduces installation human errors and reduces the occurrence of failures. 4. Prevent dust from entering or damaging the sealing surface 5. Protect customer shafts/sleeves 6. Since the seal cartridge device has an internal sleeve, a balanced seal can be operated without a customized shaft. 7. Maintenance saves time and effort, and no compression adjustment is required Disadvantages of Cartridge Mechanical Seals The disadvantage of the cartridge mechanical seal is the higher initial cost and the additional required space. To design a ready-to-go cartridge seal much information is necessary upfront.
Applications : Clear And Lubricating Media Elastomers : NBR, Viton, EPDM, FFKM, Karlez, PTFE, Aflas Metal Parts : SS 316, SS 304, Hast-C Et Alloy 20 Face Materials Carbon, Silicon Carbide, Ceramic, Tungsten Carbide Velocity : 20m/s Pressure : Vacuum 30 bar(max) Temperature : -40 dig C to +280 dig C Shaft diameter : 20mm-100 mm Details: Double acting Bidiretional Balanced
Face Materials Carbon, Silicon Carbide, Ceramic, Tungsten Carbide Metal Parts : SS 316, SS 304 Elastomers : NBR, Viton, EPDM, FFKM, PTFE Velocity : V 20m/s Temperature : -25 dig C to +250 dig C Pressure : P 15 bar(max) Shaft Diameter : 20mm -100mm We bring forth vast industrial experience and expertise in this business, involved in offering a high-quality range of Cartridge Seals Single Arrangement. Details: Single acting Bidirectional Unbalanced Additional Information: Item Code: CSAEE
Applications : Paper And pulp industries, Petrochemical industries, Dyeing industries Seal Faces : Sic, Sic/Ceramic, TC Secondary Seals : Viton, PTFE, GFT, Karlez Metal Components : SS-316, Hast-C, Monel Shaft Diameter : 25 to 150mm Pressure : Up to 45 Bars Speed : Up to 25 m/s Temperature : -50 to 160 Degree C With vast industrial experience, we are involved in offering a wide range of Stationary Mounted Cartridge Seal
OPERATING LIMIT seal size = 20mm to 150mm pressure = 15kg/cm2 speed = 15m/s temp = 20c to 250c FACE MATERIAL rotary face = carbon, silicon carbide,ceramic statonary face = carbon , silicon carbide ,
KL-4620, to replace Johncrane double cartridge seal 4620P type. Double cartridge mechanical seal. Multiple spring, meet most industry pump standards, including ANSI/DIN pumps. Operating Limits: Temperature:-50---204 Speed: 23m/s Pressure: 20bar Standard size: 24-70mm or 1-2.75 The common material: Sealing ring: Car, Sic, Ssic, TC Secondary seal: NBR, EPDM, Viton, Kalrez Spring and metal parts: 304, 316, HAST.C. Kalu also offer mechanical seals stocks for replacement of Johncrane5610, 5620, 2800E, Burgmann Cartex-SN, Cartex-DN, MFL65 Cartridge seal, AES ConvertorII. BSFG, Chesterton GSS, GDS, 155/255, Anga BE2, BED.
