Find Verified Marine Engines Suppliers, Manufacturers and Wholesalers

Product descriptions from the supplier
Specification
High item

High quality 3 cylinder E75BMHDL 55.2kw 5500rpm outboard marine engine for boat
Condition

New
Engine

4 Stroke
Fuel Type

Diesel
weight

108kg
Engine type

marine engine
Engine Model

E75BMHDL
12.54LDisplacement

1140cc
Warranty

1 Year
Aplication

marine
Aspiration

turbo-charged
Cooling System

water-cooled
Rated Power

55.2KW
Engine status

high quaility
cylinder

3

Model: Volvo Penta TAMD41M-A
Quantity: 12 Units with gearbox & single unit available
Condition: Ex-Navy very clean, well-maintained
Operating Hours: 500-1,200 hours
Location: Busan, Korea
Proof: Actual warehouse photos and videos available upon request
Gearbox: ZF HSW 630 H1
Reduction Ratio: 1.51 (Forward) / 1.52 (Reverse)

The Mercury Verado 250 is a high-performance outboard motor known for its power and reliability. Here are some key specifications:
Engine Type: 4.6L V8
Horsepower: 250 hp
Steering: Digital Throttle & Shift (DTS)
Starter: Electric
Shaft Length: Available in 25" (X-Long) and 30" (XX-Long)
Power Trim & Tilt: Yes
Fuel System: Electronic Fuel Injection (EFI)
Alternator: 115-amp
Weight: Approximately 600 lbs (272 kg)
Cooling System: Water-cooled with thermostat & pressure-controlled
The Verado 250 also features the Advanced MidSection (AMS) for reduced vibration and noise, and Adaptive Speed Control (ASC) for maintaining engine RPM despite changes in load or conditions12.

2 Stroke 30Hp Long Shaft Outboard Engine Boat Motor
30 HP outboard motor displacement is smaller, it easier for maintenance, will give you performance and reliability for your long days of boating. In many countries (especially for the developing areas) of the world where outboard demand is primarily for commercial uses, the water quality, weather and climate variance and long hours of continuous use make for a very harsh use environment. This is the two stroke outboard motor series developed mainly for commercial use such as on fishing and passenger vessels. This series suits harsh conditions that include everyday use and situations involving long hours of continuous operation. Enhanced strength and durability in locations such as roller bearings, crankshaft and cylinder block, as well as an improved water pump that ensures plenty of cooling effect, combine to deliver substantial improvements in durability and reliability.

Marine Engines are specially designed propulsion and power-generation engines used in boats, ships, yachts, fishing vessels, ferries, offshore platforms, and other marine applications. Built to withstand harsh saltwater environments and continuous operation, marine engines deliver reliable performance, fuel efficiency, and durability even under demanding sea conditions.
Key Specifications
Product Type: Marine Propulsion and Auxiliary Engines
Fuel Type: Diesel, Gasoline, Natural Gas
Power Output: 10 HP to 10,000+ HP
Engine Configuration: Inline, V-Type, and Opposed Cylinder Designs
Number of Cylinders: 2 to 20 Cylinders
Cooling System: Freshwater-Cooled, Seawater-Cooled, or Heat Exchanger Systems
Aspiration: Naturally Aspirated, Turbocharged, and Aftercooled
Starting System: Electric or Hydraulic Start
Control System: Mechanical or Electronic Engine Management
Applications: Commercial Ships, Fishing Boats, Ferries, Tugboats, Yachts, Offshore Vessels, and Naval Craft
Compliance: IMO, EPA Marine, and International Emission Standards

The Yamaha 9.9 HP 2-stroke outboard engine is a compact and reliable boat motor commonly used on small fishing boats, dinghies, and inflatable boats. The Enduro-type models are popular in many countries because they are lightweight, simple to repair, and powerful for their size

The Yamaha Enduro 40HP 2Stroke Outboard Engine is a durable marine engine designed mainly for fishing boats, workboats, and small transport vessels. The Enduro series from Yamaha Motor Company is known for simple design, high durability, and ability to run for long hours in tough marine conditions

The Yamaha F60 Outboard Motor is a 60 horsepower 4-stroke marine engine designed for small-to-medium fishing boats, patrol boats, and leisure craft. It is known for fuel efficiency, reliability, and quiet operation

The Yamaha F115 Outboard Motor is a popular 115 horsepower 4-stroke marine engine made by Yamaha Motor Company. It is designed for medium-size boats such as fishing boats, speed boats, and small commercial vessels

YAMAHA OUTBOARD ENGINES
HS Code 840820
PRICE = US$2,000/PIECE CIF
ORIGIN: THAILAND
PACKAGE: TONS
MIN ORDER:5 PIECES
DESCRIPTION
As well as its indestructible (almost) composite shaft, the great little M18 outboard is tough in every other sense too - from its hard-working, permanent magnet 12-Volt motor and its hardwearing, weed-resistant power propeller right down as far as its hard-to-damage casing. In short, it goes where you go. With no drama.

Electric-Drive Technical specs
Amp Draw 42
Voltage 12
Mount Feature Lever lock
Max Thrust (kg) 18.2
Speeds (FWD/REV) 5 FWD/3 REV
Digital Maximizer False
Shaft Length 914 mm
Battery Meter False
Control Telescoping Tiller

 

We Are Suppliers Of High Quality Yamaaha Outboard Engines Both Used And New. We Have A Wide Range Of 350HP, 300HP, 250HP, 200HP, 150HP, 100HP 75HP, 60HP 40HP AND MORE

EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS.
The all-new four-stroke, 5.6L V8 425 hp XTO Offshore is more than an outboard. Itâ??s an integrated power system. Coursing with insightful engineering and industry-first technology such as an electric steering system, itâ??s revolutionizing offshore
boatingâ??and the ownership experienceâ??for yacht-class boaters.

Our integrated digital boat control system now features Set Point. This suite of satellite-guided boat control functions
automatically maintains your position, heading or both. Suddenly fishing beneath the boat, controlled drifting and waiting in place are a snap for captains of any skill level.

SPECIFICATION:
Model Code 2: F40BEDL/ F40BETL
Engine: 4 stroke, SOHC, In-line 3
Displacement: 747 cm�³
Compression Ratio: 9.4
Max. Prop Shaft Output: 29.4 kW (40 ps) @ 5500 r/m
Full throttle rpm range: 5000 ~ 6000 r/m
Fuel Induction System: Electronic fuel injection
Starter System: Prime Start
Lubrication: Wet sump
Engine oil capacity: 1.7 l / 1.5 l * with/ without oil filter exchange
Bore x Stroke (mm): 65.0 mm x 75.0 mm
Fuel consumption: 13.6 l/h @ 5500 r/m
Trim & Tilt: Hydro (5-steps)
Shallow Water Drive Positions: (continuously variable)
Gear ratio: 2.0 (26/13)
Engine transom height: L: 536 mm (21.1
Dry Weight: 100 kg

WE ARE SUPPLIERS OF HIGH QUALITY two and four stroke OUTBOARD ENGINES BOTH USED AND NEW. WE HAVE A WIDE RANGE OF 350HP, 300HP, 250HP, 200HP, 150HP, 100HP 75HP, 60HP 40HP , 15HP , 25HP ,40HP , AND MORE

WE ALSO HAVE V MAX SHO, JET DRIVE/HIGH THRUST, FOR STROKE, XTO OFFSHORE

Reliable auxiliary engines providing essential onboard power generation and operational support for marine vessels of all sizes.

High-performance marine engines designed to deliver reliable propulsion, fuel efficiency, and dependable operation for commercial and industrial vessels.

Specifications
Engine Type 16-Valve DOHC Direct-Action In-line 4
Displacement 2670 cc
Bore x Stroke 94x6.2 mm
Recommended Max RPM 5000-6000
Lubrication System Wet Sump
Fuel Management EFI
Ignition TCI
Starter System Electric
Alternator Output 12V - 37A with Rectifier Regulator
Operation Method Remote Control
Trim & Tilt Method Power Trim & Tilt
Digital Network Gauges with Fuel Management Standard
Gear Ratio 2.00:1
OEDA Emission Rating ????
Scavenging Double Overhead Camshaft
Fuel Management EFI
Oil Pan Capacity (litres) 5.8
Spark Plug LFR5A-11
Gear Shift F-N-R
Exhaust system Through Propeller Hub (Jet)
Prop. Engagement Spline

Specifications
Engine Type 16-Valve DOHC Direct-Action In-line 4
Displacement 2670 cc
Bore x Stroke 94x6.2 mm
Recommended Max RPM 5000-6000
Lubrication System Wet Sump
Fuel Management EFI
Ignition TCI
Starter System Electric
Alternator Output 12V - 37A with Rectifier Regulator
Operation Method Remote Control
Trim & Tilt Method Power Trim & Tilt
Digital Network Gauges with Fuel Management Standard
Gear Ratio 2.00:1
OEDA Emission Rating ????
Scavenging Double Overhead Camshaft
Fuel Management EFI
Oil Pan Capacity (litres) 5.8
Spark Plug LFR5A-11
Gear Shift F-N-R
Exhaust system Through Propeller Hub (Jet)
Prop. Engagement Spline

Key attributes
Condition
New
Purpose
for replace/repair
Condition
New
Engine
2 STROKE
Fuel Type
Gasoline
Engine Position
OUTBOARD
Engine type
2 stroke
Color
Picture Shows
Product Name
Gasoline Outboard Engine Boat Motor
Packaging and delivery
Selling Units
Single item
Single package size
68X42X110 cm
Single gross weight
37.000 KG

Outboard motors for sale, Payment Terms : T/T, Bank or Wire Transfer, PayPal, Western- Union, Ria-Transfer Total or Minimum order Quantity ?, For Delivery time get back to us so we can provide all those for you if interested. Regular others also have added advantages, Bulk orders as well

Six Sets available !!! These engines is used and fully functioning with Technical Test Report. MTU 16V396 engine is rated at 1980kw (2682hp) at 1900rpm. This engine is a V16 cylinder with displacement of 63.3 liters and intended for application in fast vessels with high load factors. The running hours has tested for 3000 hours fully working functions.

Serial number: 5591585 / 5591405 / 5591614 / 5591177
Model: 16V396 Marine Engine
Hours: More than 3000 hours
HP: 1980 KW
RPM: 1950
Weight: 6000KG

Please contact to ask for price

Shaft length : S: 381mm (15") | L: 508mm (20")
Starting system : Manual
Weight : S: 24kg | L: 25kg
Engine type : OHV
Fuel delivery system : Carburetor
No. of cylinders : 1
Displacement : 138cm3
Bore x Stroke : 60.4mm x 48mm
Maximum output : 4.4kW
Full throttle operating range : 4,750 - 5,750rpm
Steering : Tiller
Oil pan capacity : 0.7 litres

Ignition system : Digital CDI
Alternator : 12V 5A (optional)
Engine mounting : Bushing type
Trim method : Manual trim & tilt
Gear ratio : 1.92:1
Gear shift : F-N-R
Exhaust : Above prop hub exhaust
Propeller selection (pitch) : 6 - 7" (Alloy)
Fuel tank capacity : Integral 1L (remote connection)
Fuel : minimum 91 (RON) octane

DF 15 HP :- 4-stroke
Shaft length : S: 381mm (15")| L: 508 mm (20")
Starting system : Electric or manual
Weight : MS: 44.0kg | ML: 45.0kg | ES: 48.0kg | EL: 49.0kg | PTL: 55.5kg
Engine type : OHC 4-valve
Fuel delivery system : Electronic fuel injection
No. of cylinders : In-line 2
Displacement : 327cm3
Bore x Stroke : 60.4mm x 57mm
Maximum output : 11.0kW
Full throttle operating range : 5,000 - 6,000rpm
Steering : Remote | Tiller
Oil pan capacity : 1.0 litre

Ignition system : Digital CDI
Alternator : E: 12V 12A | M: 12V 6A (op.)
Engine mounting : Shear mount
Trim method : Manual trim & tilt | Power tilt
Gear ratio : 2.08:1
Gear shift : F-N-R
Exhaust : Through prop hub exhaust
Propeller selection (pitch) : 7"- 12" (Alloy)
Fuel tank capacity : Separate 12L
Fuel ; minimum 91 (RON) octane

DF 20 HP:- 4-stroke
Shaft length : S: 381mm (15") | L: 508 mm (20")
Starting system : Electric or manual
Weight : MS: 44kg | ML: 45kg | ES: 48kg | EL: 49kg | PTS: 52.5kg | PTL: 54.5kg | PTH: 55.5kg
Engine type : OHC 4-valve
Fuel delivery system : Electronic fuel injection
No. of cylinders : In-line 2
Displacement : 327cm3
Bore x Stroke : 60.4mm x 57mm
Maximum output : 14.7 kW
Full throttle operating range : 5,300 - 6,300rpm
Steering : Remote | Tiller
Oil pan capacity : 1.5 litres

Ignition system : Digital CDI
Alternator : E: 12V 12A | M: 12V 6A (op.)
Engine mounting : Shear mount
Trim method : Manual trim & tilt | Power tilt
Gear ratio : 2.08:1
Gear shift : F-N-R
Exhaust : Through prop hub exhaust
Propeller selection (pitch) : 7"- 12" (Alloy)
Fuel tank capacity : Separate 12L
Fuel : minimum 91 (RON) octane

DF 25 HP:- 4-stroke
Recommended Transom Height (inches) : S:15" L:20"
Starting System : Manual S /Electric S and L
Weight LBS : Manual S: 136.6 / Electric S: 143 - Electric, Tiller, Power Trim and Tilt L: 163
Engine Type : SOHC 4-Valve
Fuel Delivery System : Suzuki Battery-less Electronic Fuel Injection with Lean Burn Control
No. Of Cylinders : 3
Piston Displacement inches (cc) : 29.8 (489)
Bore X Stroke Inches (mm) : 2.80 x 2.68 ()
Maximum Output HP : 25
Operating Range (RPM : 5000 - 6000
Steering : Tiller/Remote
Choke : N/A - Suzuki Electronic Fuel Injection
Oil Pan Capacity quarts (liter) : 1.6 (1.5)