Marine engine.
Fresh turmeric finger, fresh drumstick leaves & drumstick.
Yamaha Series: FT60GETL, F75FETL, F100GETL, F115BETX, F115BETL, F150FETX / Suzuki Series: DF60ATV, DF60ATL-A, DF90ATL, DF115ATL, DF115ATX, DF115BTX-A, DF150TX, DF150TX-A
Parameters Finish: Clear Gloss: N/A Application Methods: Roller / Brush Substrate: Rubber, Mango Exposure: Formulation
PRODUCT INFORMATION PRODUCT NAMEâ?¡ Sequoia 3000 Gloss Finish DESCRIPTION Sequoia 3000 Gloss Finish is a premium solvent based high gloss finish, it is an oil-modified alkyd enamel paint. It is easy to apply and forms a smooth, tough paint film which has excellent gloss, fungus resistance and durability. USAGE For decoration and protection. Suitable for all types of interior and exterior metal and wood surfaces BENEFITS High gloss and excellent gloss retention Excellent gloss fastness Excellent durability Washable PACK SIZE 1 litre, 5 litres COLOUR RANGE Refer to Sequoia 3000 Gloss Finish colour chart PERFORMANCE GUIDE CHEMICAL RESISTANCE Resistant to mild chemical fumes. Special paint systems required if surface is subject to constant chemical attack HEAT RESISTANCE Generally resistant to heat up to 0c. Discolouration will occur after a prolong time if surface is constantly heated WATER RESISTANCE Resistant to normal atmospheric humidity present. Will withstand repeated washing. Not suitable for surface immerse in water THEORETICAL COVERAGE 16-18 meter2 /liter. Note: Surface coverage will alter depending on condition of surface to be paint PRE-APPLICATION SURFACE PREPERATION Generally all surfaces to be coated must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust. For optimal performance, new galvanized surface should be cleaned and degreased to ensure good adhesion PREVIOUSLY PAINTED SURFACEâ?¡All loose and flaking paint film must be removed. Surface must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust. RECOMMENDED PAINT SYSTEM Types of Surface Undercoat (1 coat) Finish (2 coats) Wood REDWOOD white undercoat Metal SEQUOIA PROTECTIVE COATING OR NASA oxide SEQUOIA 3000 GLOSS PAINT PAINT APPLICATION THINNINGâ?¡ For normal use, thinning is not required. If required, add 1 part of white spirit (10%) to 10 part of paint. Note: Excessive thinning will affect the quality of the paint. DRYTIME Touch dry : 2 hours Hard dry/Recoat : 8 hours CLEAN UP â?¡Clean all equipment with white spirit immediately afteruse. Allow empty container to dry prior to disposal. PRODUCT DATA COMPOSITION â?¡Pigments: Lightfast organic pigment, lightfast inorganic pigment. Blinder : Organic Alkyd Solvent : White spirit
2019 Evinrude 40 HP E40DRGL Outboard Motor Engine Engine Type: Inline 2-Cylinder E-TEC D.I. Bore x Stroke: 3.62 x 2.60 in. (92 x 66 mm) Displacement: 52.7 cu.in. (863cc) Starting: Rope (Electric Accessory) Dimensions Shaft Length: 20 in. (508 mm) Weight: 232 lb. (105 kg) General Trim Method: Manual Propshaft Horsepower: 40 hp Full Throttle Operating Range: 5500-6000 rpm Gear Ratio / Shift: 2.9:1 Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator: 81 Amps Total / 25 Net Dedicated Steering: Tiller Warranty: 3-Year, Non-Declining Features Auto-Storage: The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a four--stroke outboard. Extend the life of your outboard and your boating season. More Miles Per Hour: Get even more extra miles per hour with the Straight Leading Edge gearcase. The Evinrude SLE gearcase features high-efficiency water pickups and a weed-slicing shape up front, for a cooler-running engine and ultimate durability and reliability in the long run. Specifications Engine Model: E40DRGL Graphite Engine Type: Inline 2-Cylinder E-TEC D.I. Bore x Stroke - in (mm): 3.62 x 2.60 (92 x 66) Displacement - cu in (cc) L: 52.7 (863) Gear Ratio: 2.9:1 Full Throttle RPM Range: 5500-6000 RPM Weight - lbs (kg): 232 (105) Starting: Rope (Electric Accessory) Controls: Mechanical Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator Output*: 81 Amps Total / 25 Net Dedicated Steering: Tiller Trim Method: Manual Trim Range: -4�° to 16�° Tilt Range: 65�° Shaft Length - in (mm): 20 (508) Lubrication: Multi-Point Targeted Oiling Oil Tank Capacity - gal (L): 2 (1.9) Recommended Oil: Evinrude / Johnson XD-100 Oil Recommended Fuel: 87 Octane Warranty: 3-Year, Non-Declining Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union
2019 Honda 25 HP BF25D3LRG Outboard Motor For mid and smaller horsepower needs, there is plenty of punch in the Honda BF30 and BF25. But it is power you will feel and never hear. That because all Hondas are whisper quiet. So extraordinarily quiet, we donot have to put extra dampening insulation in the cowling like most manufacturers do. Instead we pack em full of features. Like a Center Mount Tiller with up-front controls. The 3 to 3 Induction system that provides smooth, quiet operation. And Autostart Enrichment, which makes starting a breeze. And of course, the exceptionally durable BF25 and BF30 are backed by the best standard warranty you can get. The end result? More good times on the water. Condition New Stock Number BF25D3LRG Year 2019 Make Honda Marine Model BF25 L Type Fuel Type Gas Vehicle Type Outboard Category Four Stroke Engine 4-Stroke SOHC 3 Cylinder - 2 Valves/ Cyl. Propulsion Single Outboard Propulsion Type Powered Number of Engines 1 Engine Type Outboard Engine Power 25 HP Dry Weight 160 lbs
2019 Suzuki 40 HP DF40ATL2 Outboard Motor This is the only engine in the 40 hp class to offer DOHC performance, and also the only engine in its class to incorporate a maintenance-free, oil-bathed timing chain, which provides the outboard with increased durability and maintenance free operation. With larger displacements for increased power and performance, Suzuki's Lean Control System for improved fuel economy and designs that are more compact and lighter in weight than the predecessor, the new DF40A engines also incorporate the Suzuki Troll Mode System. During the 2011 Miami Boat Show, the Boating Writers of America presented Suzuki Marine with the NMMA Innovation Award for the DF40A/DF50A. Features Multi Point Sequential Electronic Fuel Injection Suzuki Lean Burn Control System Suzuki Troll Mode System Direct Ignition Suzuki Easy Start System Over-Rev. Limiter Low Oil Pressure Caution Fully Transistorized Ignition Timing Chain Fresh Water Flushing System Power Trim and Tilt Suzuki Anti-Corrosion System Specifications Recommended Transom Height (inches): L: 20 Starting System: Electric Weight (lb.): L: 229 Engine Type: DOHC 12-Valve Fuel Delivery System: Multi Point Sequential Electronic Fuel Injection Number of Cylinders: 3 Piston Displacement inches (cc): 57.4 (941) Bore x Stroke inches (mm): 2.85 x 2.99 (72.5 x 76) Maximum Output HP: 40 Operating Range (rpm): 5000 - 6000 Steering: Remote (Tiller Kit Optional) Oil Pan Capacity quarts (liter): 2.9 (2.7) Ignition System: Solid State Direct Ignition Alternator: 12V 19A Trim Position: Power Trim and Tilt Gear Ratio: 2.27:1 Standard Propeller: Optional See Dealer Propeller Selection: 9 - 17
Specifications Engine Type: Yamaha T25XWTC High Thrust Four Stroke Horsepower: 25 hp Cylinders: 2 cyl Shaft Length: 25" Steering: Remote Mech Starter: Electric + Manual Weight: 154 lbs Full Throttle Range: 5000 - 6000 rpm Displacement: 432cc Induction System: EFI Warranty: 3 years
Composition Active ingredients: hydrocarbon polymer, alkyd solution and siloxane in petroleum solvent. Appearance Free flowing slightly milky liquid. Packing Available in plastic pail of 18 litres, 7 litres. Storage Store at normal room temperature away from sources of ignition. Ensure containers lid are covered lightly after use. limitations Rainshield is designed for static weather resistance and may lessen efficiency is subjected to physical abrasion. Warranty 5 years subject to terms and condition. Available in plastic pail of 18 litres, 7 litres.
Solvent paint, stoving paint, epoxy paint .
All kinds of paint.
Thermoplastic road marking paint.
Tufkote W8568SLM Primer
SGM uses high - performance and environmentally-friendly technology. Its water-based coating packages itself into individual capsules, allowing each to contain its own unique formula and colour. THis creates a one time multi- color spray system that is not only durable, but also effective in mirroring the authentic granite texture. Advantages: 1. One time , multicolour spray system 2. Colours and paterns can be customized 3. Resistant to stains, fungus, algaue, acid and alkali 4. Washable and easy to maintain 5. High adhesion and anti peeling/ flaking 6. Water - based and eco-friendly 7. Excellent durability against weather conditions.
Marine.
Solid Propellant.
Surface propulsion units, surface propeller, levi drives.
Parameters Finish: Clear Gloss: N/A Application Methods: Spray Substrate: Rubber, Mango, MDF Exposure: Formulation
Parameters Finish: Clear Gloss: N/A Application Methods: Wipe Substrate: Rubber, Mango Exposure: Formulation
