Machinery pump, winches and cranes, electrical/pneumatic instrumentation, monitoring equipments - ODM system, oil mist detector, 15ppm, navigation ship control system, instrumentation, engine & part, pump and control valve, marine propeller.
We able to supply globe valve with more competitive price without compromise your valve performance and safety requirements.
We are able to supply various kind of valve like ball valve, butterfly valve, gate valve, strainers, catridges filter, check valve, breather valve, and etc. Price is competitive, without compromise your performance and safety requirements.
2019 Suzuki 40 HP DF40ATL2 Outboard Motor This is the only engine in the 40 hp class to offer DOHC performance, and also the only engine in its class to incorporate a maintenance-free, oil-bathed timing chain, which provides the outboard with increased durability and maintenance free operation. With larger displacements for increased power and performance, Suzuki's Lean Control System for improved fuel economy and designs that are more compact and lighter in weight than the predecessor, the new DF40A engines also incorporate the Suzuki Troll Mode System. During the 2011 Miami Boat Show, the Boating Writers of America presented Suzuki Marine with the NMMA Innovation Award for the DF40A/DF50A. Features Multi Point Sequential Electronic Fuel Injection Suzuki Lean Burn Control System Suzuki Troll Mode System Direct Ignition Suzuki Easy Start System Over-Rev. Limiter Low Oil Pressure Caution Fully Transistorized Ignition Timing Chain Fresh Water Flushing System Power Trim and Tilt Suzuki Anti-Corrosion System Specifications Recommended Transom Height (inches): L: 20 Starting System: Electric Weight (lb.): L: 229 Engine Type: DOHC 12-Valve Fuel Delivery System: Multi Point Sequential Electronic Fuel Injection Number of Cylinders: 3 Piston Displacement inches (cc): 57.4 (941) Bore x Stroke inches (mm): 2.85 x 2.99 (72.5 x 76) Maximum Output HP: 40 Operating Range (rpm): 5000 - 6000 Steering: Remote (Tiller Kit Optional) Oil Pan Capacity quarts (liter): 2.9 (2.7) Ignition System: Solid State Direct Ignition Alternator: 12V 19A Trim Position: Power Trim and Tilt Gear Ratio: 2.27:1 Standard Propeller: Optional See Dealer Propeller Selection: 9 - 17
Automobile engines.
Marine engine.
Used engine 20ft container
Yamaha Series: FT60GETL, F75FETL, F100GETL, F115BETX, F115BETL, F150FETX / Suzuki Series: DF60ATV, DF60ATL-A, DF90ATL, DF115ATL, DF115ATX, DF115BTX-A, DF150TX, DF150TX-A
Ball Valve,Gate Valve,Butterfly Valve,Actuator Valve All Kind Of Valve are Covered
Flush 3 or 6 litres water for water closet. Adjustable height.
2019 Evinrude 40 HP E40DRGL Outboard Motor Engine Engine Type: Inline 2-Cylinder E-TEC D.I. Bore x Stroke: 3.62 x 2.60 in. (92 x 66 mm) Displacement: 52.7 cu.in. (863cc) Starting: Rope (Electric Accessory) Dimensions Shaft Length: 20 in. (508 mm) Weight: 232 lb. (105 kg) General Trim Method: Manual Propshaft Horsepower: 40 hp Full Throttle Operating Range: 5500-6000 rpm Gear Ratio / Shift: 2.9:1 Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator: 81 Amps Total / 25 Net Dedicated Steering: Tiller Warranty: 3-Year, Non-Declining Features Auto-Storage: The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a four--stroke outboard. Extend the life of your outboard and your boating season. More Miles Per Hour: Get even more extra miles per hour with the Straight Leading Edge gearcase. The Evinrude SLE gearcase features high-efficiency water pickups and a weed-slicing shape up front, for a cooler-running engine and ultimate durability and reliability in the long run. Specifications Engine Model: E40DRGL Graphite Engine Type: Inline 2-Cylinder E-TEC D.I. Bore x Stroke - in (mm): 3.62 x 2.60 (92 x 66) Displacement - cu in (cc) L: 52.7 (863) Gear Ratio: 2.9:1 Full Throttle RPM Range: 5500-6000 RPM Weight - lbs (kg): 232 (105) Starting: Rope (Electric Accessory) Controls: Mechanical Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode Alternator Output*: 81 Amps Total / 25 Net Dedicated Steering: Tiller Trim Method: Manual Trim Range: -4�° to 16�° Tilt Range: 65�° Shaft Length - in (mm): 20 (508) Lubrication: Multi-Point Targeted Oiling Oil Tank Capacity - gal (L): 2 (1.9) Recommended Oil: Evinrude / Johnson XD-100 Oil Recommended Fuel: 87 Octane Warranty: 3-Year, Non-Declining Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union
2019 Honda 25 HP BF25D3LRG Outboard Motor For mid and smaller horsepower needs, there is plenty of punch in the Honda BF30 and BF25. But it is power you will feel and never hear. That because all Hondas are whisper quiet. So extraordinarily quiet, we donot have to put extra dampening insulation in the cowling like most manufacturers do. Instead we pack em full of features. Like a Center Mount Tiller with up-front controls. The 3 to 3 Induction system that provides smooth, quiet operation. And Autostart Enrichment, which makes starting a breeze. And of course, the exceptionally durable BF25 and BF30 are backed by the best standard warranty you can get. The end result? More good times on the water. Condition New Stock Number BF25D3LRG Year 2019 Make Honda Marine Model BF25 L Type Fuel Type Gas Vehicle Type Outboard Category Four Stroke Engine 4-Stroke SOHC 3 Cylinder - 2 Valves/ Cyl. Propulsion Single Outboard Propulsion Type Powered Number of Engines 1 Engine Type Outboard Engine Power 25 HP Dry Weight 160 lbs
Specifications Engine Type: Yamaha T25XWTC High Thrust Four Stroke Horsepower: 25 hp Cylinders: 2 cyl Shaft Length: 25" Steering: Remote Mech Starter: Electric + Manual Weight: 154 lbs Full Throttle Range: 5000 - 6000 rpm Displacement: 432cc Induction System: EFI Warranty: 3 years
Norminal Size: DN750 Pressure Rating: ASML CL 150 Design Spec: API 6D, API 6FA (ASME BI 6.4'/ SERIES-A) Type of end connection: Falnced Type of Luce: Raised Face Type of Bore: Full, Bore Mat, body: Duplex Stainless Steel Mul, Lrim: Duplex Stainless Steel Mul spec, body: ASTM A182 Grade F51 / A090-4A Type, Mounting: TRUNNION Model, valve: TBA Model, ucluutor: Bettis and TBA Classification, hazardous: Ex II 2GD Certification, electrical: ATEX EExd
Baby products
We can supply welding equipments, welding engine for multi user up to 4 persons and all the accessories for welding purpose.
SYSTEM COMPONENT: Alarm Check Valve, Retarding Chamber, Alarm Bell, Standard Trim, Drain Valve, Ball Valve, Gauges, Pressure switch, Fittings and Nipples. - For ordering information: Nominal Size, Max. Working Pressure and End Connection
Gate valves serve to cut the medium flow in the piping system. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner with respect to the percentage of openings. - Material: Ductile Iron - Temperature Range 0-80 degrees C - Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550 - End Connection: Flange by Flange, Grooved by Grooved, Grooved by flanged, threaded by threaded, F by MJ, MJ by MJ Available - For Ordering Information - Pattern, Size, End Connection and Rated Pressure
A deluge valve known as an automatic water control valve delivers large quantities of water over a large area in a relatively short period of time, used for fast application in the deluge, pre-action, foam protection, fixed spray, and other automatic water control. TYPE OF ACTIVATION: Hydraulic Activation Electrical Activation Electro-Pneumatic Activation Manual OUR AVAILABLE SYSTEMS WITH DELUGE VALVE SYSTEM OPERATION: Pre-action System Water Spray System Foam Suppression System. TRIM TYPE: Basic Trim Wet Pilot Trim (Hydraulic Release) Dry Pilot Trim (Pneumatic Release) Electric Release Trim Test And Alarm Trim with Sprinkler Alarm.
Industrial ball valves for oil and gas
