Pelabuhan Klang Packaging Bags Suppliers and Manufacturers

Water based screen printing inks.

Water Based Textile Silkscreen Printing Inks.

Water-based textile ink, water-based wood coating.Export, Technical Support.

Printing Parameters Squeege:  60-65 SHORE Mesh:  120/inch Tension:� 25 N/cm2 Clean Up:  Water Strokes:  3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:  60-65 SHORE Mesh:  120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes:  3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege 60-65 SHORE Mesh:  120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:  60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up:  Water Strokes:  3 Rounds  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:70-75 SHORE Mesh: 120 - 190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:70-75 SHORE Mesh: 120 -190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:70-75 SHORE Mesh: 120 - 190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:70-75 SHORE Mesh:  120 190/inch Tension: 25 - 35 N/cm Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes:  3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:70-75 SHORE Mesh: 120 - 190/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 -4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130-160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%