Find Verified Printing Inks Suppliers, Manufacturers and Wholesalers

The CLI-42 Eight-Color Ink Tank Pack contains a full set of ink for the PIXMA PRO-100 Wireless Printer. The kit contains the following ink tanks: CLI-42BK Black Ink Tank CLI-42GY Gray Ink Tank CLI-42LGY Light Gray Ink Tank CLI-42C Cyan Ink Tank CLI-42M Magenta Ink Tank CLI-42Y Yellow Ink Tank CLI-42PC Photo Cyan Ink Tank CLI-42PM Photo Magenta Ink Tank

The Canon PFI-300 Ten Color Ink Tank Pack features a full set of specially formulated LUCIA PRO inks, designed to be used with the Canon imagePROGRAF PRO-300 printer. The ink produces professional quality photos with an expanded color gamut and enhanced black density. The included Matte Black ink provides deeper black levels on fine art paper as well as a wider dark area reproduction range with improved gradation. The Chroma Optimizer reduces the difference in ink droplet height to form a flat, smooth ink layer. This leads to an evenly reflected light, deep blacks, and bright, saturated colors on coated papers.

The CLI-65 Eight Color Ink Tank Value Pack from Canon contains a full set of ink tanks for the PIXMA PRO-200 Wireless Professional Inkjet Photo Printer. These specially formulated ink tanks provide an enhanced color gamut in magenta and reds, an improvement of dark color reproduction in red and blues, and deeper black expression.

The Canon PFI-300 Photo Black Ink Tank is a specially formulated LUCIA PRO ink, designed to be used with the Canon imagePROGRAF PRO-300 printer. The ink produces professional quality photos with an expanded color gamut and enhanced black density.

Print high-quality posters, technical drawings, and architectural blueprints with the PFI-030 Ink Tank from Canon. Offered here in yellow for jselect imagePROGRAF printers, this 55mL ink tank features LUCIA TD pigment technology, which provides fine lines, sharp text, vibrant colors, and water-resistant printing when used with water-resistant media.

The LUCIA PGI-72 Chroma Optimizer Ink Tank from Canon is compatible with the PIXMA PRO-10 Printer. It features pigment-based ink and Canon's FINE (Full-photolithography Inkjet Nozzle Engineering) technology which ensures accurate ink placement.

Canon PFI-1300 Matte Black Pigment Ink Tank (330mL) Leverage Canon's pigment-based LUCIA PRO Ink Technology to create sharp, vivid, and long-lasting images with your imagePROGRAF PRO series large-format printer by picking up this PFI-1300 Matte Black Pigment Ink Tank. This tank has a capacity of 330mL to allow for a large number of prints without needing to constantly replace cartridges.

Printing Parameters Squeege:  60-65 SHORE Mesh:  120/inch Tension:� 25 N/cm2 Clean Up:  Water Strokes:  3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:  60-65 SHORE Mesh:  120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes:  3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege 60-65 SHORE Mesh:  120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:  60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up:  Water Strokes:  3 Rounds  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:70-75 SHORE Mesh: 120 - 190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:70-75 SHORE Mesh: 120 -190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:70-75 SHORE Mesh: 120 - 190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:70-75 SHORE Mesh:  120 190/inch Tension: 25 - 35 N/cm Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes:  3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:70-75 SHORE Mesh: 120 - 190/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 -4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%