DESCRIPTION Sequoia 3000 Gloss Finish is a premium solvent based high gloss finish, it is an oil-modified alkyd enamel
paint. It is easy to apply and forms a smooth, tough paint
film which has excellent gloss, fungus resistance and
durability.
USAGE For decoration and protection. Suitable for all types of
interior and exterior metal and wood surfaces
BENEFITS High gloss and excellent gloss retention
Excellent gloss fastness
Excellent durability
Washable
PACK SIZE 1 litre, 5 litres
COLOUR RANGE Refer to Sequoia 3000 Gloss Finish colour chart
PERFORMANCE GUIDE
CHEMICAL RESISTANCE
Resistant to mild chemical fumes. Special paint systems
required if surface is subject to constant chemical attack
HEAT RESISTANCE
Generally resistant to heat up to 0c. Discolouration will
occur after a prolong time if surface is constantly heated
WATER RESISTANCE
Resistant to normal atmospheric humidity present. Will
withstand repeated washing. Not suitable for surface
immerse in water
THEORETICAL COVERAGE
16-18 meter2 /liter. Note: Surface coverage will alter depending on condition
of surface to be paint
PRE-APPLICATION
SURFACE PREPERATION Generally all surfaces to be coated must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the
surface with sand paper or wire-brush and clean of dust. For optimal performance, new galvanized surface should be cleaned and degreased to ensure good adhesion
PREVIOUSLY PAINTED SURFACEâ?¡All loose and flaking paint film must be removed. Surface must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust.
RECOMMENDED PAINT SYSTEM
Types of Surface
Undercoat (1 coat) Finish (2 coats)
Wood REDWOOD white undercoat
Metal SEQUOIA
PROTECTIVE COATING OR NASA oxide
SEQUOIA 3000
GLOSS PAINT
PAINT APPLICATION THINNINGâ?¡ For normal use, thinning is not required. If required, add 1 part of white spirit (10%) to 10 part of paint. Note: Excessive thinning will affect the quality of the paint.
DRYTIME Touch dry : 2 hours
Hard dry/Recoat : 8 hours
CLEAN UP â?¡Clean all equipment with white spirit immediately afteruse. Allow empty container to dry prior to disposal.
PRODUCT DATA COMPOSITION â?¡Pigments: Lightfast organic pigment, lightfast inorganic pigment.
Blinder : Organic Alkyd
Solvent : White spirit
700 Marine Paint Suppliers
Short on time? Let Marine Paint sellers contact you.
Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
Alternator: 81 Amps Total / 25 Net Dedicated
Steering: Tiller
Warranty: 3-Year, Non-Declining
Features
Auto-Storage: The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a four--stroke outboard. Extend the life of your outboard and your boating season.
More Miles Per Hour: Get even more extra miles per hour with the Straight Leading Edge gearcase. The Evinrude SLE gearcase features high-efficiency water pickups and a weed-slicing shape up front, for a cooler-running engine and ultimate durability and reliability in the long run.
Specifications
Engine Model: E40DRGL Graphite
Engine Type: Inline 2-Cylinder E-TEC D.I.
Bore x Stroke - in (mm): 3.62 x 2.60 (92 x 66)
Displacement - cu in (cc) L: 52.7 (863)
Gear Ratio: 2.9:1
Full Throttle RPM Range: 5500-6000 RPM
Weight - lbs (kg): 232 (105)
Starting: Rope (Electric Accessory)
Controls: Mechanical
Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
Alternator Output*: 81 Amps Total / 25 Net Dedicated
Steering: Tiller
Trim Method: Manual
Trim Range: -4�° to 16�°
Tilt Range: 65�°
Shaft Length - in (mm): 20 (508)
Lubrication: Multi-Point Targeted Oiling
Oil Tank Capacity - gal (L): 2 (1.9)
Recommended Oil: Evinrude / Johnson XD-100 Oil
Recommended Fuel: 87 Octane
Warranty: 3-Year, Non-Declining
Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union
For mid and smaller horsepower needs, there is plenty of punch in the Honda BF30 and BF25. But it is power you will feel and never hear. That because all Hondas are whisper quiet. So extraordinarily quiet, we donot have to put extra dampening insulation in the cowling like most manufacturers do.
Instead we pack em full of features. Like a Center Mount Tiller with up-front controls. The 3 to 3 Induction system that provides smooth, quiet operation. And Autostart Enrichment, which makes starting a breeze.
And of course, the exceptionally durable BF25 and BF30 are backed by the best standard warranty you can get. The end result? More good times on the water.
This is the only engine in the 40 hp class to offer DOHC performance, and also the only engine in its class to incorporate a maintenance-free, oil-bathed timing chain, which provides the outboard with increased durability and maintenance free operation. With larger displacements for increased power and performance, Suzuki's Lean Control System for improved fuel economy and designs that are more compact and lighter in weight than the predecessor, the new DF40A engines also incorporate the Suzuki Troll Mode System. During the 2011 Miami Boat Show, the Boating Writers of America presented Suzuki Marine with the NMMA Innovation Award for the DF40A/DF50A.
Features
Multi Point Sequential Electronic Fuel Injection
Suzuki Lean Burn Control System
Suzuki Troll Mode System
Direct Ignition
Suzuki Easy Start System
Over-Rev. Limiter
Low Oil Pressure Caution
Fully Transistorized Ignition
Timing Chain
Fresh Water Flushing System
Power Trim and Tilt
Suzuki Anti-Corrosion System
Specifications
Recommended Transom Height (inches): L: 20
Starting System: Electric
Weight (lb.): L: 229
Engine Type: DOHC 12-Valve
Fuel Delivery System: Multi Point Sequential Electronic Fuel Injection
Number of Cylinders: 3
Piston Displacement inches (cc): 57.4 (941)
Bore x Stroke inches (mm): 2.85 x 2.99 (72.5 x 76)
Composition
Active ingredients: hydrocarbon polymer, alkyd solution and siloxane in petroleum solvent.
Appearance
Free flowing slightly milky liquid.
Packing
Available in plastic pail of 18 litres, 7 litres.
Storage
Store at normal room temperature away from sources of ignition.
Ensure containers lid are covered lightly after use.
limitations
Rainshield is designed for static weather resistance and may lessen efficiency is subjected to physical abrasion.
Warranty
5 years subject to terms and condition.
SGM uses high - performance and environmentally-friendly technology. Its water-based coating packages itself into individual capsules, allowing each to contain its own unique formula and colour. THis creates a one time multi- color spray system that is not only durable, but also effective in mirroring the authentic granite texture.
Advantages:
1. One time , multicolour spray system
2. Colours and paterns can be customized
3. Resistant to stains, fungus, algaue, acid and alkali
4. Washable and easy to maintain
5. High adhesion and anti peeling/ flaking
6. Water - based and eco-friendly
7. Excellent durability against weather conditions.
