We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (T/T). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk.
Below are our Plastic Ball Clay Specification:
DILATOMETRIC ANALYSIS
Linear Thermal Expansion, ± x 10-7 ( C-1) [50 C-500 C] - 63.8
RESIDUE CONTENT
Residue Content on 63¼m (w/w %) - 1.7
Residue Content on 106¼m (w/w %) - 1.6
Fired Shrinkage (%) (@1200 C) -8.5
Water Absorption (%) (@1200 C) - 2.6
DRY MOR (kg/cm2) - 57
FlRED COLOUR
L Value - 71.3
a Value - 4.4
b Value - 21.2
CHEMICAL ANALYSIS USIING XRF
Silica as SiO2 (%) 60.23
Aluminium as A2O3 (%) 25.26
Titanium as TiO2 (%) 1.00
Iron as Fe2O3 (%) 1.94
Sodium as Na2O (%) 0.04
Potassium as K2O (%) 1.70
Calcium as Cao (%) Â 0.01
Magnesium as MgO (%) Â 0.60
Phosphorus as P2O5 (%) Â 0.03
Manganese as MnO (%) 0.01
Chromium as Cr2O3 (%) 0.01
Zirconium as ZrO2 (%) Â 0.04
Hafnium as HfO2 (%) Â 0.00
Sulphur as SO3 (%) Â 0.00
Strontium as SrO (%) 0.01
Loss on Ignition (%) (@1025 C) 9.1
MOISTURE CONTENT (%) Â 28 32
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia.
We, Modkha Marine Sdn. Bhd. has more than 7 yearsâ?? experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk.
Below are our Plastic Ball Clay Specification:
DILATOMETRIC ANALYSIS
Linear Thermal Expansion, �± x 10-7 (�°C-1) [50�°C-500�°C] --> 63.8
RESIDUE CONTENT
Residue Content on 63�¼m (w/w %) --> 1.7
Residue Content on 106�¼m (w/w %) --> 1.6
Fired Shrinkage (%) (@1200�°C) --> 8.5
Water Absorption (%) (@1200�°C) --> 2.6
DRY MOR (kg/cm2) --> 57
FlRED COLOUR
L Value --> 71.3
a Value --> 4.4
b Value --> 21.2
CHEMICAL ANALYSIS USIING XRF
Silica as SiO2 (%) --> 60.23
Aluminium as A2O3 (%) --> 25.26
Titanium as TiO2 (%) --> 1.00
Iron as Fe2O3 (%) --> 1.94
Sodium as Na2O (%) --> 0.04
Potassium as K2O (%) --> 1.70
Calcium as Cao (%) --> 0.01
Magnesium as MgO (%) --> 0.60
Phosphorus as P2O5 (%) --> 0.03
Manganese as MnO (%) --> 0.01
Chromium as Cr2O3 (%) --> 0.01
Zirconium as ZrO2 (%) --> 0.04
Hafnium as HfO2 (%) --> 0.00
Sulphur as SO3 (%) --> 0.00
Strontium as SrO (%) --> 0.01
Loss on Ignition (%) (@1025C) --> 9.1
MOISTURE CONTENT (%) --> 28 32
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia.
We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk.
Below are our Semi Plastic Ball Clay Specification:
DRY MOR (kg/cm2) -> 37.73
Fired MOR (Kg/cm2) -> 292.66
Green MOR (Kg/cm2) -> 17.34
Fired Shrinkage (%) (@1200�°C) -> 9.7
Dry Shrinkage (%) -> -0.1
Water Absorption (%) (@1200�°C) -> 7.3
FlRED COLOUR
L Value -> 85.70
a Value -> 2.2
b Value -> 10.4
WI=Whiteness index -> 17.7
Fire resistance� -> 1580 �°C
CHEMICAL ANALYSIS USIING XRF
Silica as SiO2 (%) -> 47.63
Aluminium as A2O3 (%) -> 34.88
Titanium as TiO2 (%) -> 0.77
Iron as Fe2O3 (%) -> 1.29
Sodium as Na2O (%) -> 0.06
Potassium as K2O (%) -> 1.65
Calcium as Cao (%) -> 0.14
Magnesium as MgO (%) -> 0.20
Phosphorus as P2O5 (%) -> 0.16
Manganese as MnO (%) -> 0.02
Chromium as Cr2O3 (%) -> 0.01
Zirconium as ZrO2 (%) -> 0.03
Hafnium as HfO2 (%) -> 0.01
Sulphur as SO3 (%) -> 0.01
Loss on Ignition (%) (@1025�°C) -> 12.4
MOISTURE CONTENT (%) -> 28 - 32
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia.
We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk.
Below are our Semi Plastic Ball Clay Specification:
DRY MOR (kg/cm2) -> 37.73
Fired MOR (Kg/cm2) -> 292.66
Green MOR (Kg/cm2) -> 17.34
Fired Shrinkage (%) (@1200C) -> 9.7
Dry Shrinkage (%) -> -0.1
Water Absorption (%) (@1200C) -> 7.3
FlRED COLOUR
L Value -> 85.70
a Value -> 2.2
b Value -> 10.4
WI=Whiteness index -> 17.7
Fire resistance� -> 1580 �°C
CHEMICAL ANALYSIS USIING XRF
Silica as SiO2 (%) -> 47.63
Aluminium as A2O3 (%) -> 34.88
Titanium as TiO2 (%) -> 0.77
Iron as Fe2O3 (%) -> 1.29
Sodium as Na2O (%) -> 0.06
Potassium as K2O (%) -> 1.65
Calcium as Cao (%) -> 0.14
Magnesium as MgO (%) -> 0.20
Phosphorus as P2O5 (%) -> 0.16
Manganese as MnO (%) -> 0.02
Chromium as Cr2O3 (%) -> 0.01
Zirconium as ZrO2 (%) -> 0.03
Hafnium as HfO2 (%) -> 0.01
Sulphur as SO3 (%) -> 0.01
Loss on Ignition (%) (@1025 C) -> 12.4
MOISTURE CONTENT (%) -> 28 - 32
Prodim Proliner 8 3D Digital Templating System
Used condition like new, Excellent and ready to work
Come with warranty 12 month
Manufacture : 2018
Includes:
1x 8-CS 3D Digital Templating System
1x Pointer
1x types of scanner (long/short)
1x batteries
1x Battery charger
1x Remote control
1x User guide & interactive CD
1x Bag
Software:
UNFOLD for flattening 3D objects
COUNTERTOP for the manufacture of countertops: measurements, finish, inset panels, and dimension, auto PDF report for CNC-operator.
SURVEY opposite principle, imports DXF file and viaducts in the measured.
Product Type: Basic Lead Complex
Appearance: White Flakes
Description: It is produced from high quality raw materials to give very good thermostability and adjusted lubrication for the extrusion of PVC Pipes. Non-Dusting and can be used under a wide range of processing conditions with most common extruders. It also allows high production rates and work well with most common PVC type and filters.
Recommended Dosage: 1.5 to 2.3phr depending on formulation and filler content. Dosage varies depending on formulation.
Shelf Life: 12 months
Trimble S8 High Precision Robotic Total Station with TSC3 Controller
Used condition Calibrated and ready to work
Come with warranty 12 month
include :
-Trimble S8 High Precision 1" Robotic Total Station with Finelock
-Trimble TSC3
-Charging Kit
-Chargers
-Cables
-Batteries
-Trimax Tripod.
-Trimble Case.
1. Buyer Company issues Irrevocable Corporate Purchase Order (ICPO) on its official company letterhead to the seller with Passport Copy and Bank Comfort Letter / POF.
2. Seller Company issue Draft Contract / Sales & Purchase Agreement (SPA Open for amendments if any) both parties sign and seal the present contract and exchange the copies electronically.
3. Seller Company registers and legalizes contract officially with the appropriate authorities to facilitate booking of allocation and securing a legitimate approval for the Transfer of Ownership Title/Allocation to buyerâ??s Company name at sellerâ??s expense.
4. Seller Company sends hard copy of the notarized and insured POP documents along with the legalized Contract to buyer Company. The Partial POP documents to be send along with the legalized Contract include:
a) Certificate of Origin.
b) Company Registration Certificate.
c) Statement of Product Availability.
d) Product Quality Passport (Dip Test Analysis).
e) Refinery Commitment to Produce / Supply.
f) Refinery Legalized Draft Contract.
g) Proforma Invoice.
5. On confirmation of the receipt of the partial POP, buyer must within five (5) banking days issue the Bank Guarantee in the form of Transferable (DLC/MT700). Failure to issue the said bank guarantee within the stipulated days. Buyer issues a Performance security financial deposit of $320,000.00USD (Three Hundred and Twenty Thousand United State
Dollars). This is to enable the seller secure the service of the Vessel for the transportation of the product to buyerâ??s destination port.
Note: Fee made by buyer will be deducted when making payment for the total cost of the product at the discharge port after a successful CIQ/SGS test at the discharge port.
6. Sellerâ??s bank sends through swift the original and full Proof of Product (POP) documents to the buyerâ??s bank and the Documentary Letter of Credit (DLC MT700) issued by the buyerâ??s bank on to the seller's bank will become immediately operative.
a) Copy of the Charter Party Agreement to transport the product to discharge port.
b) Copy of Shipping Schedule Document.
c) Copy of Product Analysis Report.
d) Copy of Certificate of Origin.
e) Copy of Bill of Lading
f) Copy of Tank Receipt.
g) Copy of Vessel Q88.
h) Copy of SGS Report.
i) Copy of Certificate of Product.
7. Both banks will confirm to seller and to buyer that the Documentary Letter of Credit (DLC MT700) has been accepted and the shipping commences as scheduled in the contract for the CIF delivery.
8. Payment will be made for the product by the buyerâ??s Bank via T/T MT103 Wire Transfer to the sellerâ??s bank after the CIQ/SGS Inspection at port of discharge and the delivery to the buyer bank of all documents required by the contract.
9. Seller releases the commission of the intermediaries immediately.
Film: 500mm x 1.66kg (Gross Weight) x 12um,
Core: 58/0/0,
Size: 500mm x 300m x 12um
Packing: 6rolls/carton X 96carton/pallet X 20pallet/40ft
Including wooden pallet
(GREEN Concept, Reduce Wastage per 40ft container)
High quality plucking finger for all types of feathers picking equipment available in the International market such as MAREL STORK, LINCO, MEYN, BAYLE, SYSTEMATE and so on.
1. Grade SIO2 99.3 and above.
2. FE 0.02 and below.
3. Size below 2mm.
4. USD 30-33.00 per MT FOB
5. Min quantity 50,000 MT per shipment per month (tenure of 12 months) where further increase of volume for further review.
6. Lead time upon booking confirmation 45 to 55 days.
7. More details shall be provided in Sale and Purchasing Agreement (SPA) after confirmation of all terms is made.
8. The form of payment is LC/TT.
USED PLASTIC INJECTION MOULDING MACHINE
HAITIAN MA 3800 II - 20 UNITS - USD 28,000 FOB PASIR GUDANG
HAITIAN MA 2500 II - 30 UNITS -USD 18,000 FOB PASIR GUDANG
YEAR 2014/15
USED PLASTIC INJECTION MOULDING MACHINE
HAITIAN MA 3800 II - 20 UNITS - USD 28,000 FOB PASIR GUDANG
HAITIAN MA 2500 II - 30 UNITS -USD 18,000 FOB PASIR GUDANG
YEAR 2014/15
Simultaneous Injection-Decoration System (IMD/IML) : This technology widely used in consumer electronics, appliance, automotive and medical/healthcare devices, and supports customer to achieve unique CMF finish on mechanical parts with high quality and productivity.
IMD, IML are products which add patterns and functions on the products surface at the same time as molding, by sandwiching a film with patterns or functions in a mold and pouring the melted resin into it.
We can provide unique features on your product surface which cannot not be added by conventional process like painting, silk printing or pad printing.
We can even add electric functions such as touch sensors / buttons and LEDs to your product surface with solution.
We can also do general molding with variety of colors, materials and finishes that suit your preference.
If you already have in-house injection molding machine, we can also source you high quality heat transfer foils.
Aseptic Nested Filling Line (De-bagging, De-liding, Filling & Stoppering Machine)
Aseptic Nested Filing Line from De-bagging, De-liding, Filling and Stoppering system.
Vacuum Stoppering system to minimize entrapped filling & drip-free.
Rubber stopper feeding to eliminate jamming at the track.
Statistical Weight In Process Control of filling weight system by tare in / tare out to obtain nett filling weight check.
Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion.
Valveless Rotary Piston pump for Hygiene Filling.
Contact parts are FDA Approved material and autoclavable.
Laminar Air Flow Booth.
Auto rejection without machine stop.
Optional N2 flushing.
Optional FDA 21 CFR Part 11.
Optional Realtime Equipment OEE monitoring anytime, anywhere.
6161 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
