CHIPKO SW is a fast drying Water based adhesive which has excellent bonding properties and ability to give brilliant tensile properties in its bond made with the substrates. Product has long shelf life and high ease of application. The product has good drying speed and gives excellent coverage. It is perfect to bond wooden laminates to wood, wood to wood and other wooden applications where high quality performance and good working cost is the key. Application CHIPKO SW can be applied using hand roller, glue applicator, hand comb applicator etc. A consistent fine coat and care while application will give best possible results in terms of coverage and faster drying. Usage and storage condition CHIPKO SW has an adequate antimicrobial dosage to prevent the microbial contamination during the shelf-life and has a shelf-life of 12 months starting from the date of receipt if it stored in the original/unopened containers at temperature between 5 and 40 C. The opened containers should be kept away from heat sources and direct sunlight. Open containers should be have their lids tightened when not in use.
1) Label Adhesive for coating of face stock materials such as (Paper, PET, PE, Foil). 2) Tape Adhesive for coating on BOPP, double sided tape, medical coating, band-aids. 3) DIY floor adhesive for PVC floors. 4) Shoe Adhesive hot melt used for stitching 5) Bookbinding hot melt used for spine bonding. 6) Woodworking hot melt used for profile wrapping, panel assembly and edge banding. 7) Non-woven hot melt used for diaper construction, positioning and elastic 0.5kg/cake, 8kg/carton Flaky particles, 25kg/bag 180kg/steel drum
Shell Helix Ultra 5W40 Shell Helix Ultra 5W30 Shell Helix Ultra 0W40 Shell Helix Ultra 0W30 Shell Helix Ultra 0W20 Shell Helix HX7 5W40 Shell Helix HX7 5W30 Shell Advance 4T 10W40 Shell Rimula R4 X 15W40 Shell Gadus Shell Omala Shell Mysella Shell Gadinia
CUSTOMISED RANGE OF AUTOMOTIVE LUBRICANTS OESTE lubricants' super specialty products provide unsurpassed performance in automotive applications.OESTE works with esteemed auto and component manufacturers to develop unique and proprietary chemistries. From the perfect tactile feel of interiors to achieving top performance from motors, cables, switches, etc. Dynamically light, special synthetic Silicone base oil and Lithium thickener for Over Riding Clutch Thermally stable at elevated temperatures Very low evaporation rate. Safe on most plastics. Excellent oxidation resistance.
TOYOTA GENUINE ATF/ GEAR OIL PART NO. 08886-02105 ( CVT -TC) , 08886-02305 ( ATF WS) , 08886-02505 ( CVT FE) , 08886-81015(TYPE IV) , 08880-13205(0W20 SP) , 08880-13705 ( 5W30 SP) ALL 4 LITRES. 6X4L PER CTN. 27 CTNS/PALLET . 162 TINS/PALLET MOQ - 1 PALLET PRICE QUOTED EX-WAREHOUSE LEAD TIME : 1-2.5 MONTHS
It is a synthetic engine oil that shows superior performance in new generation gasoline and diesel passenger cars compatible with Diesel Particulate Filter (DPF). With its high thermal and oxidation resistance, it extends the oil change period and provides fuel economy. Features and Potential Benefits API : SM / CF, SN/ CF, SL/ CF, SJ /CF
SAE 0W20 SN SAE 0W30 SN
Physical and chemical properties: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 40 ± 1% Product characteristics 1.Impart surface smooth, inner soft and elasticity 2.Super yellowing-resistant, shearing resistant and warm water washing 3.Processing PH range from 1-12, high temperature 90-100 resistant 4.Improve sewing ability, especially suitable for cotton knitting fabric like terry towel 5.Highly resistant to electrolytes, suitable for resin finishing 6.Suitable for dyeing vat and jet machine processing Usage Method Exhausting: 1%-3% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package And Storage 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry
Basic Characteristics Appearance: slight yellow transparent liquid Ionic nature: slight cationic pH value: 4.5-6.5 Solubility:can be dissolved in water at any ratio Hand feeling: fluffy, soft Features and advantages This product is amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber fabrics, such as polyester, nylon, acrylic and blended fabric, feel fluffy soft, smooth better; slightly yellowing, not suitable for bleaching or light-colored fabric; This product is particularly treated polyester velvet fabric can have a very good fluffy and soft feeling, good degree of fine, can significantly improve the softening of thickened fabric; Mixed with 803A series silicone oil suitable for cotton paint printing, to enhance the soft; Mixed with M series silicone oil suitable for cotton and poly-cotton knitted fabric feel finishing, feel soft and delicate; Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO. Usage This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning,the recommended using proportion can be diluted 1 :2.5 (20% solids) or diluted 1: 5 (10% solids), do not need to adjust the PH value; After thinning, you can use exhausting method and continuous padding method. exhausting method: the dosage (20% solids) 2-4% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 20-40g / l, 120 pre-bake, 150-180 stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year.
Basic Characteristics Appearance: slightly yellow transparence liquid Ionicity: Cationic PH value: 4.5-6.5 Solubility: can be can be dissolved in water at any ratio Hand feeling:instantly hydrophilic Features And Advantages This product is cationized amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for bleaching or light-colored fabric; 1.This product is particularly suitable for processing cotton or polyester-cotton fabric, can achieve instantaneous hydrophilic effect, hand feeling general; 2.This product can be used as antistatic agent for chemical fiber fabric; cationic strong, and anion may occur coagulation, application before the need to do the application test, or add the company's specialty products anion and cation anti-coagulation agent; 3.high temperature resistance, suitable for a variety of processing technology, will not bring sticky roller, high suction rate; without APEO. Usage 1.This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning,using after diluting at the recommended ratio1: 2.5 (20% solids) or 1 :5 (10% solids) , and adjust the PH value of acetic acid to 6-6.5; The speed should not be too fast, otherwise the bubble more; 2. After thinning, you can use exhausting method and continuous padding mothod: Exhausting method: the dosage (20% solids) 1-4% (owf), temperature 30-40 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 10-40g / l, 120 pre-bake, 150-180 stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year. -
Physical and chemical property: Appearance: Yellowish or Transparent Liquid Ionic properties: Slight Cation/Nonionic Solid content: 60 1% PH value (1% aqueous solution 20): 6-8 Product characteristics 1.Super smooth and soft 2.Especially suitable for polyester fabric and blends 3.Suitable for continuous process techniques, no stick roller 4.Without APEO Usage Method Diluted with water at ratio 1:5-7, self-emulsifying. Exhausting: recommended usage: 2--4% (O.W.F) Padding: 1540g/l The special process, please appropriate adjustments according to the samples. Package And Storage 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 12 months of storage expiry.
Physical and chemical property: Appearance: Yellowish or Transparent Liquid Ionic properties: Slight Cation/Nonionic Solid content: 60 1% PH value (1% aqueous solution 20): 6-8 Product characteristics 1.Super smooth and soft 2.Especially suitable for polyester fabric and blends 3.Suitable for continuous process techniques, no stick roller 4.Without APEO Usage Method Diluted with water at ratio 1:5-7, self-emulsifying. Exhausting: recommended usage: 2--4% (O.W.F) Padding: 1540g/l The special process, please appropriate adjustments according to the samples. Package And Storage 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 12 months of storage expiry.
Physical and chemical property: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 60 1% Product characteristics: Soluble in cold water, impart surface smooth, inner soft and elasticity Super yellowing-resistant, shearing resistant and warm water washing Processing PH range from 1-11, high temperature 90C'-10C' resistant Improve sewing ability, especially suitable for cotton woven fabric Highly resistant to electrolytes, suitable for resin finishing Non-toxic to cellulase Usage Method: Padding recommended usage: 5-20g/l, 1g/l acetic acid as well Exhausting: 0.5%-2% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package and Storage: 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Basic Characteristics Appearance: slightly yellow transparent liquid Ionic: slight cationic PH value: 4.5-6.5 Solubility: can be dissolved in water at any ratio Hand feeling: special soft, smooth Features And Advantages This product is the end of epoxy silicone oil and ammonia ether polymerization (solvent is ethylene glycol monobutyl ether, solvent content of 40%), and finally add the end of epoxy polyether chain derived multi-copolymer block silicone oil emulsion, especially suitable for processing polyester and wool fibers, feel the characteristics of special sponginess, good soft and smooth; also suitable for cellulose fiber, nylon and other blended fabric feel finishing; Mixed with M-100A and 9905A silicone oil products, especially suitable for a variety of polyester velvet, wool blankets, chemical fiber lace and other fabric feel finishing,Meet the needs of customers fluffy, soft and smooth comprehensive effect. Mixed with M-100A and 9906A silicone oil products, especially for poly-cotton, cotton knitted fabric finishing; Dilution and use the method This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended ratio can be diluted 1 : 2.5 (20% solids) or 1 :5 (10% solids) , do not need to adjust the PH value; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 2-4% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 20-40g / l, 120 pre-bake, 150-180 Package And Storage 50kg or 200kg plastic drum.Should be stored in a cool ventilated warehouse, to prevent exposure, storage period of half a years.
Physical and chemical property: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 60 1% Product characteristics: Soluble in cold water, impart surface smooth, inner soft and elasticity Super yellowing-resistant, shearing resistant and warm water washing Processing PH range from 1-11, high temperature 90C'-10C' resistant Improve sewing ability, especially suitable for cotton woven fabric Highly resistant to electrolytes, suitable for resin finishing Non-toxic to cellulase Usage Method: Padding recommended usage: 5-20g/l, 1g/l acetic acid as well Exhausting: 0.5%-2% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package and Storage: 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Engine Oil for Cars, Motorcycles, Trucks and Buses for Both Diesel and Petrol Engine.Export, distribution
Full synthetic motor oils, engine oils, compressor oils, gear oils and greases.Exporting
Engine oil, synthetic oil, hydraulic oil, gear oil, brake fluid.Exfactory, FOB and C&F
Recycled engine oil, gear oil, hydraulic oil, brake oil and grease.
Producer of all kind of lubricants oil, automotive oil, industrial oil, hydraulic oil, grease , break fluid, atf, coolant and many more..
